偏心凸轮机构动力学的一种新模型及其计算

摘要/Abstract

摘要：

为了更加客观地研究偏心凸轮机构的动力学行为，在考虑凸轮与推杆之间的摩擦以及凸轮轴柔性的基础上，应用有限元法和拉格朗日方程建立了一种偏心凸轮机构的动力学方程。以该动力学方程为数学模型，通过数值方法研究了该机构的运动响应。依据所获得到的运动响应，分析了凸轮与推杆之间的摩擦以及凸轮轴的柔性对机构运动的影响。得出的结论说明，在研究偏心凸轮机构的动力学行为时，计入凸轮与推杆之间的摩擦以及凸轮轴柔性是必要的。

关键词:

偏心凸轮机构；摩擦；柔性；动力学方程

Abstract:

In order to investigate dynamics characteristics of eccentric cam mechanism more exactly, establishing dynamics model of the mechanism with considering some practical factors is needed. A new dynamics equation for eccentric cam mechanism with considering the friction between the cam and the follower and flexibility of the camshaft was established by using the finite element method and Lagrange approach. Taking this equation as mathematics model, the motion response of the mechanism was studied by using numerical method. According to the motion response obtained, the effects of the friction between the cam and the follower with the flexibility of the camshaft on the motion of mechanism were analyzed, and some correlative conclusions were obtained. It is shown from the conclusions that considering the factors of the friction between the cam and the follower with the flexibility of the camshaft is needed.

Key words: eccentric cam mechanism, friction, flexibility, dynamics equation

中图分类号:

TH132

张劲夫, 张俊龙.

偏心凸轮机构动力学的一种新模型及其计算

[J]. 中国机械工程, 2010, 21(05): 535-539.

ZHANG Jin-Fu, ZHANG Dun-Long.

A New Dynamics Modeling and Simulation for Eccentric Cam Mechanism

[J]. China Mechanical Engineering, 2010, 21(05): 535-539.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2010/V21/I05/535

参考文献

[1]Norton R L. Design of Machinery: an Introduction to the Synthesis and Analysis of Mechanisms and Maehines[M]. New York: McGraw-Hill Higher Education, 2004.
[2]Rao J S, Dukkipati R V. Mechanism and Machine Theory[M]. New York: Wiley,1989.
[3]杨可桢,程光蕴,李仲生主编.机械设计基础[M],2006:323.
[4]张策主编.机械原理与机械设计[M].北京:机械工业出版社,2004.
[5]史新民主编.机械设计基础[M],2007:423.
[6]丘映辉.机械原理与设计[M].大连:大连理工大学出版社,2004.
[7]Matthew G K,Tesar D. Cam System Design: the Dynamic Synthesis and Analysis of the One Degree of Freedom Model [J].Mechanism and Machine Theory,1976,11(4) :247-257.
[8]Chen F Y. Survey of the State of the Art of Cam System Dynamics [J].Mechanism and Machine Theory, 1977(12): 201-224.
[9]Horeni B. Double--mass Model of an Elastic Cam Mechanism[J]. Mechanism and Machine Theory, 1992,27(4) : 443-449.
[10]Yilmaz Y, Kocabas H. The Vibration of Disc Cam Mechanism[J].Mechanism and Machine Theory, 1995,30(5) : 695-703.
[11]Fbien B C. The Design of Dwell- rise--dwell Cams with Reduced Sensitivity to Parameter Variation[J].Journal of the Franklin Institute, 1995, 332(2) : 195-209.
[12]Qui H. A Universal Optimal Approach to Cam Curve Design and Its Applications[J]. Mechanism and Machine Theory,2005,40(6) :669-692.
[13]Saka Z, Yilmaz Y. Torsional Vibrations of Camshafts[J]. Mechanism and Machine Theory,1992, 27(3) : 225-233.
[14]Mahyuddin A I, Midh A,Bajaj A K. Evaluation of Parametric Vibration and Stability of Flexible Cam --follow Systems[J].ASME Journal of Mechani- cal Design,t994,116(1) :291-297.
[15]Mahyuddin A I, Midh A. Influence of Varying Cam Profile and Follower Motion Event Types on Parametric Vibration and Stability of Flexible Cam -follow Systems[J]. ASME Journal of Mechanical Design,1994,116(1) :298-305.
[16]Cveticanin L. Stability of Motion of the Cam--follower System[J]. Mechanism and Machine Theo- ry,2007,42(9) : 1238-1250.
[17]Cveticanin L. Stability of Motion of the Cam-follower System[J]. Mechanism and Machine Theory,2007,42(9) :1238-1250.
[18]Hairer E,Norsett S P,Wanner G. Solving Ordinary Differential Equations [M]. Berlin.. Springer, 1993.