基于磁流变阻尼固紧器的工作台定位研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (12): 1477-1480.

基于磁流变阻尼固紧器的工作台定位研究

余晓芬;马文平;程伶俐

合肥工业大学,合肥,230009

出版日期:2010-06-25 发布日期:2010-07-01
基金资助:
国家自然科学基金资助项目(50775063)
National Natural Science Foundation of China（No. 50775063）

Positioning Study of the Working Table Based on MRF Locking Damper

Yu Xiaofen;Ma Wenping;Cheng Lingli

Hefei University of Technology,Hefei,230009

Online:2010-06-25 Published:2010-07-01
Supported by:
National Natural Science Foundation of China（No. 50775063）

摘要/Abstract

摘要：

基于磁流变液制作的X向、Y向磁流变阻尼固紧器,采用新颖的横向卧式结构,解决了传统纵向立式阻尼固紧器磁流变液溢出密封和摩擦初始阻尼力较大的问题。该固紧器具有柔性阻尼和无冲击固紧工作台的双重功能,减弱了传统固紧方法带来的冲击和直线电机驱动引起的振动,并成功应用于纳米三坐标测量机,使工作台在X向、Y向的分辨率达到5nm,定位稳态波动从原来的20nm减小到5nm。

关键词:

磁流变液, 磁流变阻尼固紧器, 柔性阻尼, 无冲击固紧, 纳米三坐标测量机, 纳米定位

Abstract:

A MRF locking damper herein based on MRF adopted novel horizontal structure. It can solve the contradiction between the seal of MRF and the larger initial frictional damping force for the vertical structure. Furthermore it has flexible damping and can lock the working table without impact,which reduces the impact brought by traditional locking method and the vibration caused by the linear electric motor’s driving. It is successfully applied to Nano-CMM and makes sure that the resolution of the working table achieves 5nm in X,Y direction and the positioning steady-state fluctuation is improved to 5nm from primary 20nm. 

Key words: magnetorheological fluid(MRF), MRF locking damper, flexible damping, lock without impact, nano-CMM, nano positioning

中图分类号:

TB383

余晓芬, 马文平, 程伶俐.

基于磁流变阻尼固紧器的工作台定位研究

[J]. 中国机械工程, 2010, 21(12): 1477-1480.

TU Xiao-Fen, MA Wen-Beng, CHENG Ling-Li.

Positioning Study of the Working Table Based on MRF Locking Damper

[J]. China Mechanical Engineering, 2010, 21(12): 1477-1480.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2010/V21/I12/1477

参考文献

[1]Wang Juan, Hu Hongsheng, Wan Jiong, et al. Development of an Embedded Control System for Magnetorheological Fluid Damper under Impact Load [J]. Electronic Measurement & Instruments, 2009, 19(1) :39-41.
[2]Zhu Tianjun,Zong Changfu. Development of MRF Damper Modelling and Validation of MRF Damper Test [J]. Control Automation and Systems Engineering, 2009,7 (2) : 238-241.
[3]Zapateiro Mauricio,Karimi Hamid Reza, Luo Ningsu. Semiactive Backstepping Control for Vibration Reduction in a Structure with Magnetorheological Damper Subject to Seismic Motions[J]. Journal of Intelligent Material Systems and Structures, 2009, 20(17):2037-2053.
[4]Guan Xinehun, Guo Pengfei, Ou Jinping. Study of the Response Time of MR Dampers [C]//Second International Conference on Smart Materials and Nanotechnology in Engineering. Weihai, China, 2009:74930u.
[5]Chen Jinxin. New Type of Magnetorheological Fluid Damper Applied to the Small Damping Force Condition[J]. Journal of Vibration and Shock, 2009,28(2):155-161.
[6]Hu Wei, Wereley N M, Chemouni L, et al. Semiactive Linear Stroke Magnetorheological Fluid Elastic Helicopter Lag Damper [J]. Journal of Guidance, Control, and Dynamics, 2008,30 ( 2 ) : 565- 575.
[7]Chooi Weng Wai, Olutunde Oyadiji S. Experimental Testing and Validation of a Magnetorheological Damper Model [J]. Journal of Vibration and Acoustics - Transaction of the ASME, 2009, 131 (6) :141-147.
[8]李志全[1],杜成斌[1],于国军[1],孙立国[1].磁流变阻尼器阻尼特性试验与改进阻尼模型研究[J].振动与冲击,2009,28(5):124-126.
[9]周云,谭平著.磁流变阻尼控制理论与技术[M],2007:287.
[10]阎照文等编著.ANSYS 10.0工程电磁分析技术与实例详解[M],2006:483.
[11]吴球红[1],马平[1],陈振辉[1],梁蔼明[1].大行程直线电机的磁流变阻尼器优化设计[J].机电工程技术,2008,37(9):57-59.
[12]郭鹏飞[1],关新春[1],欧进萍[1,2].磁流变液阻尼器响应时间的试验研究及其动态磁场有限元分析[J].振动与冲击,2009,28(6):1-5.
[13]徐从裕[1],余晓芬[1].非同步采样法的光栅纳米测量[J].计量学报,2008,29(4):293-296.
[14]徐从裕[1],余晓芬[1].基于互补函数算式的光栅快速细分方法[J].电子测量与仪器学报,2006,20(3):6-9.
[15]马文平[1],余晓芬[1],程伶俐[1],余卿[1].用于微纳米测量的磁流变阻尼固紧系统[J].应用科学学报,2010(1):106-110.