利用压电层提高变截面Beck杆的稳定性研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (19): 2359-2363.

利用压电层提高变截面Beck杆的稳定性研究

杨峰1,2;王忠民1

1.西安理工大学,西安,710048

2.宝鸡文理学院,宝鸡,721007

出版日期:2010-10-10 发布日期:2010-10-20
基金资助:
国家自然科学基金资助项目(10872163)；陕西省教育厅科学研究基金资助项目(08JK394)
National Natural Science Foundation of China（No. 10872163）;
Shanxi Provincial Science Research Foundation of Ministry of Education of China（No. 08JK394）

Improving Dynamic Stability of Varying Cross-section Beck’s Column with Piezoelectric Layers

Yang Feng1,2;Wang Zhongmin1

1.Xi’an University of Technology, Xi’an, 710048

2.Baoji College of Arts and Science,Baoji,Shaanxi,721007

Online:2010-10-10 Published:2010-10-20
Supported by:

National Natural Science Foundation of China（No. 10872163）;
Shanxi Provincial Science Research Foundation of Ministry of Education of China（No. 08JK394）

摘要/Abstract

摘要：

对一定边界条件下的变截面Beck杆,通过在其表面特定位置粘贴压电片,并施加电场于压电片来提高其稳定性。建立了含端部集中质量的压电层合变截面Beck杆的计算模型,导出分段表示的运动微分方程。利用微分求积法分析了压电片几何物理参数对Beck杆的动态稳定性的影响。研究结果表明,粘贴压电片可以有效提高Beck杆的稳定性。

关键词:

变截面, Beck杆, 压电片, 稳定性, 微分求积法

Abstract:

To improve the stability of a varying cross-section Beck’s column with certain boundary conditions, an external voltage was applied on the piezoelectric layers bonded on the surfaces of Beck’s column. The mathematical model of the piezoelectric composite varying cross-section Beck’s column was established and the differential equations of motion were derived. With DQ method, the effect of geometrical and physical parameters of piezoelectric layers on the stability of varying cross-section Beck’s column were studied. Stability of Beck’s column can be improved by the piezoelectric layers.

Key words:

varying cross-section, Beck’s column, piezoelectric layers, stability, differential quadrature(DQ) method

中图分类号:

O326

杨峰, 王忠民.

利用压电层提高变截面Beck杆的稳定性研究

[J]. 中国机械工程, 2010, 21(19): 2359-2363.

YANG Feng, WANG Zhong-Min.

Improving Dynamic Stability of Varying Cross-section Beck’s Column with Piezoelectric Layers

[J]. China Mechanical Engineering, 2010, 21(19): 2359-2363.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2010/V21/I19/2359

参考文献

[1]Beck M. Die Knicklast des Einseitig Eingespannten Tangential Gedrtickten Stabes[J]. J Angew Mathimatics & Physics, 1952, 3(1): 476-477.
[2]Bolotin V V. Non--conservative Problems of the Theory of Elastic Stability[M]. New York:Macmillan, 1963.
[3]Koiter W T. Unrealistic Follower Forces[J]. Journal of Sound and Vibration, 1996,194(1):636-638.
[4]Sugiyama Y, Langthjem M A, Ryu B J. Realistic Follower Forces [J]. Journal of Sound and Vibration, 1999, 225(4) :779-782.
[5]Elishakoff I. Controversy Associated with the So-called" Follower Forces": Critical Overview[J].Applied Mechenical Review, 2005,58(1): 117-142.
[6]Hauger W, Vetter K. Influence of an Elastic Foundation on the Stability of a Tangentially Loaded Column[J]. Journal of Sound and Vibration, 1976,47 (1) : 296-299.
[7]Atanackvic T M, Weticanin L. Dynamics of Inplane Motion of a Robot Arm[M]//Acar M, Makra J,Penney E eds. Mechatronics-the Basis for New Intdustrial Development. Boston: Computational Mechanics Publication, 1994: 147-152.
[8]Matsude H, Sakiyama T, Morita C. Variable Cross Sectional Beck' s Column Subjected to Non-conservative Load[J]. Zeitsehrift fur Angwandte Mathematik und Mechanik (ZAMM), 1993,73(1) : 383- 385.
[9]Kounadis A N. The Existence of Regions of Divergence Instability for Non--conservative Systems under Follower Forces [J].Int. Journal of Solids Structure, 1983, 19(1): 725-733.
[10]Irie T, Yamada G, Takahashi I. Vibration and Stability of a Non- uniform Timoshenko Beam Subjected to a Follower Force[J]. Journal of Sound and Vibration, 1980,70(1): 503-512.
[11]Lee S Y, Kuo Y H. Exact Solutions for the Non-conservative Elastic Stability of Non-uniform Columns[J]. Journal of Sound and Vibration, 1992, 155(1): 291-301.
[12]Chen Y Z. Interaction between Compressive Force and Vibration Frequency for a Varying Crosssection Cantilever under Action of Generalized Follower Force[J]. Journal of Sound and Vibration,2003, 259(4) .. 991-999.
[13]Wang Q,Teik C. Complex Analysis of Flutter and Buckling of Beams under Rotational and Transverse Spring Constraints[J]. Advances in Structural Engineering, 2004, 7(1): 21-32.

[1]	赵伟, 王志远, 周志立. 载重汽车连续下坡弯道路段制动稳定性仿真研究 [J]. J4, 201016, 21(16): 2010-2015.
[2]	袁志群, 李曰瀚, 林立, 孙鹏飞, 张义, . 风车桥气动干扰作用下的汽车纵横向协调控制[J]. 中国机械工程, 2024, 35(04): 731-741.
[3]	闵德垒, 童汝亭, 危银涛. 考虑轮胎非线性的横摆角速度计算与车辆稳定性控制[J]. 中国机械工程, 2023, 34(21): 2521-2530.
[4]	任勇生, 姚东辉, 张金峰. 时滞金属切削系统颤振的研究进展[J]. 中国机械工程, 2023, 34(21): 2548-2567,2576.
[5]	赵泽民, 王立华, 黄洪燚, 陈太茂, 蒋维. 动力稳定作业参数对道床稳定性的影响[J]. 中国机械工程, 2023, 34(19): 2313-2319，2369.
[6]	谢苗, 朱昀, 刘杰, 任泽, 杨志勇, 刘治翔, 王贺, 孟庆爽. 基于改进离散方法的截割稳定性预测分析[J]. 中国机械工程, 2023, 34(18): 2153-2164，2176.
[7]	王姝, 张海川, 赵轩, 宋函锟. 融合稳定性的分布式驱动电动汽车路径跟踪控制策略研究[J]. 中国机械工程, 2023, 34(09): 1035-1044.
[8]	朱晨, 池茂儒, 赵明花, 代亮成, 陈仕祺. 连通式横向减振器在地铁车辆上的适用性分析[J]. 中国机械工程, 2023, 34(06): 660-667，676.
[9]	宁湘锦, 汪小凯, 华林, 韩星会, 张科, . 超大型环件径轴向轧制过程稳定性与圆度自适应控制方法研究[J]. 中国机械工程, 2022, 33(11): 1353-1360.
[10]	杨潇, 曾令万, 陈鹏, 杜彦斌, 李博. 干切滚齿机床热流复杂特性及多维调控策略[J]. 中国机械工程, 2022, 33(05): 623-629.
[11]	王轶禹, 赵建社, 谷民凯, 纪涛. 渐开线内花键电解加工流场设计及工艺稳定性研究[J]. 中国机械工程, 2021, 32(13): 1562-1570.
[12]	郭磊, 刘检华, 张佳朋, 李夏禹, 张秀敏, 夏焕雄. 航天工业中胶接技术的研究现状分析[J]. 中国机械工程, 2021, 32(12): 1395-1405.
[13]	刘勇, 周一帆, 许铠通, 姜伟. 车辆动力装置变刚度隔振新方法[J]. 中国机械工程, 2021, 32(06): 741-747,755.
[14]	郑鑫;赵又群;王秋伟;张陈曦. 匹配机械弹性车轮的电子稳定控制器参数分析[J]. 中国机械工程, 2020, 31(23): 2883-2890.
[15]	张宁;李田;殷国栋;吴建华;赵子乾. 转向系参数对汽车拖车组合系统稳定性的影响[J]. 中国机械工程, 2020, 31(21): 2521-2528.