定量基因扩增仪热循环系统建模与分析

中国机械工程 ›› 2011, Vol. 22 ›› Issue (1): 31-34.

定量基因扩增仪热循环系统建模与分析

姚英豪;陈章位;黄靖;刘娟容

浙江大学流体传动及控制国家重点实验室，杭州，310027

出版日期:2011-01-10 发布日期:2011-01-17

Modeling and Analysis of Thermal Cycle System for Quantitative PCR Instrument

Yao Yinghao;Chen Zhangwei;Huang Jing;Liu Juanrong

State Key Laboratory of Fluid Power Transmission and Control, 

Zhejiang University, Hangzhou, 310027

Online:2011-01-10 Published:2011-01-17

摘要/Abstract

摘要：

根据热、电传递规律的相似性，建立了基于热电制冷器的定量基因扩增仪(PCR仪)热循环系统的等效电路模型，用电路分析方法研究热传导问题。通过电路仿真软件Multisim10对该系统进行仿真，分析系统稳态、动态特性，以及散热器热阻对系统性能的影响。在热循环系统的设计、优化和控制中采用该等效电路模型进行分析是一种简单有效的方法。

关键词:

定量基因扩增仪(PCR仪), 热电制冷器, 热循环系统, 等效电路模型

Abstract:

An equivalent circuit model of the thermal cycle system based on thermoelectric cooler was proposed according to the analogy between thermal and electrical variables. The use of this model allows the static and dynamic performance of the system to be analyzed by using electrical circuit analysis programs such as Multisim10. It is an effective and simple method to design, analyze and optimize the thermal electric system by using this model.

Key words:

quantitative PCR, thermoelectric cooler(TEC), thermal cycle system, equivalent circuit model

中图分类号:

TH79
R318.6



姚英豪, 陈章位, 黄靖, 刘娟容.

定量基因扩增仪热循环系统建模与分析

[J]. 中国机械工程, 2011, 22(1): 31-34.

TAO Yang-Hao, CHEN Zhang-Li, HUANG Jing, LIU Juan-Rong. Modeling and Analysis of Thermal Cycle System for Quantitative PCR Instrument[J]. China Mechanical Engineering, 2011, 22(1): 31-34.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2011/V22/I1/31