滚珠型弧面凸轮连续传动机构承载接触分析

中国机械工程 ›› 2012, Vol. 23 ›› Issue (4): 379-382.

滚珠型弧面凸轮连续传动机构承载接触分析

牟世刚;冯显英;李蕾

山东大学,济南,250061

出版日期:2012-02-25 发布日期:2012-03-02
基金资助:
国家自然科学基金资助项目（50875153）
National Natural Science Foundation of China（No. 50875153）

Load Tooth Contact Analysis on Globoidal Cam Continuous Transmission Mechanism with Balls

Mu Shigang;Feng Xianying;Li Lei

Shandong University,Jinan,250061

Online:2012-02-25 Published:2012-03-02
Supported by:
National Natural Science Foundation of China（No. 50875153）

摘要/Abstract

摘要：

在建立滚珠型弧面凸轮连续传动机构数学模型的基础上,得到了弧面凸轮的啮合模型,并进行了齿面接触特性分析。弧面凸轮啮合传动时接触形式表现为球齿面与马鞍面之间的点接触,对点接触形成的椭圆进行了分析,确定了其方向和尺寸。利用曲面上任意点处主曲率的计算方法,得到了接触点处主曲率的变化规律。计算了接触区域最大压应力,分析了弧面凸轮连续传动时接触中心最大压应力的变化规律。

所得结论对进一步研究滚珠型弧面凸轮连续传动理论与实际应用具有重要的指导意义,为完善滚珠型弧面凸轮传动机构的设计与制造提供了理论依据。

关键词:

啮合特性, 接触分析, 弧面凸轮, 接触椭圆

Abstract:

Based on the mathematical models of the globoidal cam continuous transmission mechanism with balls,a meshing model was obtained and the tooth contact analysis was performed.The tooth contact form of meshing globoidal cam was a point contact between convexity and saddle surfaces.The contact ellipses of the meshing tooth surfaces were studied,and the orientations and dimensions of contact

ellipses were obtained.By the solution method of the principal curvature,the equations of the contact characteristics of the contact points on the globoidal cam with balls were developed.Based on the equations,the contact spots on the globoidal cam were simulated and analyses were conducted on the rule of the principal curvature of the contact points on the pinion and the globoidal cam as well as the rule of the maximum press stress of the contact areas on the globoidal cam.The study is useful for further investigations in transmission theory and practical applications of globoidal cam with balls.The presented results provide the theoretical basis for the design and manufacture of globoidal cam with balls.

Key words: meshing characteristic, contact analysis, globoidal cam, contact ellipse

中图分类号:

TH132

牟世刚, 冯显英, 李蕾.

滚珠型弧面凸轮连续传动机构承载接触分析

[J]. 中国机械工程, 2012, 23(4): 379-382.

MAO Shi-Gang, FENG Xian-Yang, LI Lei.

Load Tooth Contact Analysis on Globoidal Cam Continuous Transmission Mechanism with Balls

[J]. China Mechanical Engineering, 2012, 23(4): 379-382.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2012/V23/I4/379

参考文献

[1]张紫平.滚珠型弧面凸轮连续传动机构啮合特性分析与动力学研究 [D].山东大学,2010:
[2]Yao Ligang,Dai Jian S,Wei Guowu,et al. Compara- tive Analysis of Meshing Characteristics with Respect to Different Meshing Rollers of the Toroid- al Drive[J]. Mechanism and Machine Theory,2006, 41(7) :863-881.
[3]Litvin F L,Nava A,Qi Fan,et al. New Geometry of Face Worm Gear Drives with Conical and Cylindri- cal Worms: Generation, Simulation of Meshing, andStress Analysis[J]. Computer Methods in Applied Mechanics and Engineering, 2002, 191 ( 27/28 ) : 3035-3054.
[4]陈厚军.蒙日曲面共轭原理与环面蜗杆珠轮传动技术的研究 [D].大连理工大学,2009:
[5]Tsay D M, Ho H C, Wang K C. Design of Torque Balancing Cams for Globoidal Cam Indexing Mecha- nisms[J]. ASME Journal of Mechanical Design, 2002,124(3) : 441-447.
[6]王其超[1],陶学恒[2].新型球面包络蜗杆分度凸轮机构的研究[J].机械科学与技术,1999,18(2):252-254.
[7]王其超.滚动式回转面包络点啮合环面蜗杆传动理论与技术的研究 [D].大连理工大学,2001:
[8]陶学恒[1],刘健[2].圆柱形廓面包络蜗杆分度凸轮机构的啮合特征分析与设计[J].机械传动,1999,23(2):19-21.
[9]邓星桥[1,2],王进戈[1,2],张均富[2],吴江[2].基于遗传算法的无侧隙双滚子包络环面蜗杆传动的参数优化设计[J].四川大学学报：工程科学版,2010(2):250-254.
[10]李婷[1],潘存云[1],张立杰[1],李明宇[1].球齿轮传动的齿面接触分析和应力分析[J].国防科技大学学报,2008,30(6):123-128.
[11]李政民卿[1],朱如鹏[1].面齿轮传动的承载接触分析[J].南京航空航天大学学报,2010,42(2):219-223.
[12]Liu Chiachang, Tsay Chungbiau. Contact Charac- teristic of Beveloid Gears[J]. Mechanism and Ma- chine Theory, 2002,37(4) :333-350.
[13]Litvin F L,Fuentes A. Gear Geometry and Applied Theory [M]. Cambridge.. Cambridge University Press,2004.
[14]李瑰贤.空间几何建模及工程应用[M].北京:高等教育出版社.2007.
[15]Litvin F L,Fuentes A, Handschuh R F,et al. Face Gear Drives with Spur Involute Pinion: Geometry Generation by a Worm, Stress Analysis[J]. Com- puter Methods in Applied Mechanics and Engineer- ing, 2002,191 (25/26) : 2785-2813.
[16]LitvinFL.齿轮几何学与应用理论[M].国楷,叶凌云,范琳,等,译.上海:上海科学技术出版社,2008.
[17]刘泽九,贺士荃,刘晖编著.滚动轴承应用[M],2007:706.