基于虚拟仪器的板形模式识别系统研究

J4 ›› 2008, Vol. 19 ›› Issue (3): 334-337.

基于虚拟仪器的板形模式识别系统研究

王益群¹;刘建¹;李连平²;宁淑荣¹

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-02-10 发布日期:2008-02-10

Research on Flatness Pattern Recognition Method Based on Virtual Instrument

Wang Yiqun¹;Liu Jian¹;Li Lianping²;Ning Shurong¹

Received:1900-01-01 Revised:1900-01-01 Online:2008-02-10 Published:2008-02-10

摘要/Abstract

摘要：

介绍了气动板形检测辊的板形信号检测原理，详细阐述了普通多项式最小二乘法、正交多项式最小二乘法和基于欧氏距离的模糊模式识别法，利用虚拟仪器LabVIEW软件开发了基于上述三种方法的板形模式识别系统。通过气动板形仪在线测试了300型可逆冷轧机板形张力信号，并对张力信号进行了模式识别。实验表明：该板形模式识别系统具有良好的稳定性和有效性，良好的图形交互界面和实时测试性能为板形闭环控制提供了方便。

关键词: 模式识别；模糊；正交多项式；最小二乘法；虚拟仪器

Abstract:

The paper introduced the working principle of flatness signal measurement on pneumatic flatness measuring roller, developed a flatness pattern recognition system by virtual instrument LabVIEW, which was made up of polynomial least square method, orthogonal polynomial least square method, fuzzy pattern recognition based on Euclidean distance. By measuring on-line tension signal of cold mill aluminum stripe on pneumatic flatness measuring roller, three flatness pattern recognition methods were applied respectively. Test shows the flatness pattern recognition system possesses good stability and validity, and good real time measurement and graphics interface communion capability of system provide significant foundation for flatness closed loop control.

Key words: pattern recognition, fuzzy, orthogonal polynomial, least square method, virtual instrument

中图分类号:

TP391.4

王益群;刘建;李连平;宁淑荣;. 基于虚拟仪器的板形模式识别系统研究[J]. J4, 2008, 19(3): 334-337.

Wang Yiqun;Liu Jian;Li Lianping;Ning Shurong. Research on Flatness Pattern Recognition Method Based on Virtual Instrument[J]. J4, 2008, 19(3): 334-337.

[1]	陈超;张冬仙;刘超;章海军;. 微型光热驱动机构及其显微运动测量研究[J]. J4, 2009, 20(08): 0-886.
[2]	郝如江;;卢文秀;褚福磊;. 形态滤波器用于滚动轴承故障信号的特征提取[J]. J4, 2009, 20(02): 0-251.
[3]	李鹏阳;郝重阳;祝双武;王毅. 基于脉冲耦合神经网络的刀具磨损检测[J]. J4, 2008, 19(5): 0-629.
[4]	刘;建;王益群;姜万录;宁淑荣. 引入单纯形算子的粒子群优化算法在板形模式识别中的应用[J]. J4, 2007, 18(23): 0-2824.