[1]张振东,刘坚,周萍.电控喷射阀开启过程影响因素分析[J].农业机械学报,2003,34(6):14-17.
Zhang Zhendong,Liu Jian,Zhou Ping.Influencing Factors on Open Process of an Electronic Fuel Injector[J].Transactions of Chinese Society for Agricultural Machinery,2003,34(6):14-17.
[2]颜伏伍,邹华,肖琼.电控喷射阀动态过程模拟分析[J].武汉理工大学学报,2004,26(12):79-83.
Yan Fuwu,Zou Hua,Xiao Qiong.Simulated Analysis on Dynamic Process of Electronic-controlled Injector[J].Journal of Wuhan University of Technology,2004,26(12):79-83.
[3]Wang Qilei,Yang Fengyu,Yang Qian,et al.Experimental Analysis of New High-speed Powerful Digital Solenoid Valves[J]. Energy Conversion and Management,2011,52(6):2309-2313.
[4]Watanabe H,Ichise S,Nagaoka T,et al.Development of Compact and High Performance Fuel Injector Using Electromagnetic Field Simulation[J].SAE Paper,2005-32-0019.
[5]Cvetkovic D,Cosic I,Subic A.Improved Performance of the Electromagnetic Fuel Injector Solenoid Actuator Using a Modeling Approach[J].International Journal of Applied Electromagnetics and Mechanis,2008,27:251-273.
[6]郭辉,张振东,孙跃东,等.电控汽油喷射器参数优化及性能测试研究[J].中国机械工程,2010,21(18):2264-2267.
Guo Hui,Zhang Zhendong,Sun Yuedong,et al.Investigation of Parameter Optimization and Measurement of Performance for an Electronic Gasoline Injector[J].China Mechanical Engineering,2010,21(18):2264-2267.
[7]袁文华,鄂加强,龚金科,等.自适应粒子群优化的高压共轨燃油喷嘴多学科优化设计[J].内燃机工程,2009,30(5):63-67.
Yuan Wenhua, E Jiaqiang, Gong Jinke, et al. Multidisciplinary Design Optimization for Fuel Nozzle of High Pressure Common-rail Injection System Based on Self-adaptive Particle Swarm Optimization Algorithm[J]. Chinese Internal Combustion Engine Engineering,2009,30(5):63-67.
[8]熊庆辉,张幽彤,王定标,等.基于NSGA-Ⅱ算法的高压共轨喷油器优化设计[J]. 北京理工大学学报,2010,30(10):1160-1164.
Xiong Qinghui,Zhang Youtong,Wang Dingbiao,et al.Optimization Design of a Common Rail Injector Based on NSGA-Ⅱ Algorithm[J].Transactions of Beijing Institute of Technolog, 2010, 30(10):1160-1164.
[9]李铁栓,张幽彤,王定标,等.基于多目标模拟退火算法的高速电磁阀优化设计[J].车用发动机,2010,4(8):6-10.
Li Tieshuan,Zhang Youtong,Wang Dingbiao,et al.Optimization Design of High-speed Solenoid Based on Multi Objective Simulated Annealing Method[J].Vehicle Eingen,2010,4(8):6-10. |