滚珠丝杠进给系统滚动结合部径向动态特性参数辨识

摘要/Abstract

摘要： 针对滚珠丝杠进给系统滚动结合部径向动态特性参数难以确定的问题，提出了一种进给系统在整机状态下滚动结合部径向动态特性参数辨识方法。该方法将丝杠简化为欧拉-伯努利梁,以建立在简谐激振力作用下丝杠轴向上各截面的径向振动方程；设计实验以测量丝杠上测量点的径向振动位移，结合丝杠径向振动方程所计算的理论值建立优化目标函数，基于人工鱼群算法优化识别出滚动结合部的径向刚度及径向阻尼参数。以自行研制的滚珠丝杠进给实验台为研究对象，采用该方法对其导轨副、两端轴承组及滚珠丝杠副滚动结合部的径向刚度与径向阻尼参数进行识别。实验结果表明：以该方法辨识的结合部的参数所计算的丝杠上测量点的径向振动位移与实验测试值之间的误差在3.0%以内，验证了该方法的正确性和有效性。

关键词: 滚珠丝杠进给系统, 滚动结合部, 径向动态特性参数, 辨识, 径向振动位移, 人工鱼群算法

Abstract: In allusion to the problems that the radial dynamic characteristic parameters of rolling joints were difficult to determine in ball screw feeding systems, a method to identify the radial dynamic characteristic parameters of rolling joints in assembled feed systems was proposed. The screw was simplified as an Euler-Bernoulli beam to create its radial vibration equation under the excitation of harmonic vibration forces, the experiments were designed to obtain the measurement points' radial vibration displacements of the ball screw, combining with the theoretical values calculated by the radial vibration equation of the ball screw to establish the optimization goal function, and then the radial stiffnesses and the radial damping parameters of the rolling joints were identified by using AFSA. Taking a self-developed ball screw feed drive test bench as the research object, the radial stiffnesses and radial damping parameters of its guide pair, the ends of bearings，and its rolling joints in ball screw assembly were identified by using the proposed method. The experimental results demonstrate that the maximum errors of measurement point radial vibration displacements between the calculated values and the tested ones are as 3.0% based on the parameters of rolling joints calculated by the proposed method, and verify the correctness and validity of the proposed method.

Key words: ball screw feeding system, rolling joint, radial dynamic characteristic parameter, identification, radial vibration displacement, artificial fish swarm algorithm(AFSA)

中图分类号:

TH113.1

朱坚民;郑洲洋;胡育佳;周亚南. 滚珠丝杠进给系统滚动结合部径向动态特性参数辨识[J]. 中国机械工程.

ZHU Jianmin;ZHENG Zhouyang;HU Yujia;ZHOU Yanan. Radial Dynamic Characteristic Parameter Identification of Rolling Joints in Ball Screw Feed Systems[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2018/V29/I04/441

参考文献

[1]蒋书运,祝书龙.带滚珠丝杠副的直线导轨结合部动态刚度特性[J].机械工程学报, 2010, 46(1): 92-99.
JIANG Shuyun，ZHU Shulong. Dynamic Characteristic Parameters of Linear Guideway Joint with Ball Screw [J]. Journal of Mechanical Engineering, 2010, 46(1): 92-99.
[2]IGARASHI T，TOKUNAGA Y，OOKUMA K.Studies on the Sound and Vibration of a Ball Screw: Sound Characteristics of a Ball Screw[J]. JSME International Journal ser Vibration，Control Engineering，Engineering for Industry，1988，31(4) : 732-738.
[3]王建文.滚珠导螺杠低频噪音源之鉴别及改善研究[D].新竹: 清华大学，2005.
WANG Jianwen. Identify and Improve the Low Frequency Noise Source of Ball Screw Feed System [D]. Hsinchu: Tsing Hua University，2005.
[4]陈勇将，汤文成，王洁璐. 滚珠丝杠副刚度影响因素及试验研究[J]. 振动与冲击，2013，32(11)： 70-74.
CHEN Yongjiang，TANG Wencheng，WANG Jielu. Influence Factors on Stiffness of a Ball Screw [J]. Journal of Vibration and Shock，2013，32(11)：70-74.
[5]李松生，陈晓阳，张钢，等. 超高速电主轴轴承的动态支承刚度分析[J]. 机械工程学报，2006，42(11)：60-65.
LI Songsheng，CHEN Xiaoyang，ZHANG Gang，et al. Analyses of Dynamic Supporting Stiffness about Spindle Bearings at Extra High-speed in Electric Spindles [J].Chinese Journal of Mechanical Engineering，2006，42(11)：60-65.
[6]芮红锋，胡小秋，郭丹枫. 角接触球轴承动态特性参数测试方法[J]. 振动与冲击，2013，32(8)：88-90.
RUI Hongfeng ，HU Xiaoqiu，GUO Danfeng. Measurement Method for Dynamic Characteristic Parametric Identification of Angular Contact Ball Bearings [J]. Journal of Vibration and Shock，2013，32(8)：88-90.
[7]HU Feng，WU Bo，HU Youmin. Identification of Dynamic Stiffness Matrix of Bearing Joint Region [J]. Frontiers of Mechanical Engineering in China，2009，4(3)：289-299.
[8]毛宽民，邢满禧，李斌，等. 滚动直线导轨副可动结合部动力学建模[J]. 华中科技大学学报（自然科学版），2016，44(7)：81-85.
MAO Kuanmin，XING Manxi，LI Bin, et al. Dynamic Modeling for Movable Joint of Rolling Linear Guide [J]. J. Huazhong Univ. of Sci. & Tech. (Natural Science Edition) ，2016，44(7)：81-85.
[9]DHUPIA J S，ULSOY A G，KATZ R. Experimental Identification of the Nonlinear Parameters of an Industrial Translational Guide for Machine Performance Evaluation[J].Journal of Vibration and Control，2008，14(5) :645-668.
[10]叶健，何博侠，卜雄洙，等. 直线导轨进给机构动态特性参数测试方法[J]. 测试技术学报，2011，25(3)：205-210.
YE Jian，HE Boxia，BU Xiongzhu，et al. Test Method of Dynamic Characteristic Parameters of Feeding Mechanism [J]. Journal of Test and Measurement Technology，2011，25(3)：205-210.
[11]ZHANG H， ZHANG J， LIU H，et al.Dynamic Modeling and Analysis of the High-speed Ball Screw Feed System [J].Proceedings of the Institution of Mechanical Engineering， Part B：Journal of Engineering Manufacturing，2015,229(5):870-877.
[12]吴沁，芮执元，杨建军，等. 滚珠丝杠进给系统刚度建模及仿真[J]. 现代制造工程，2010，11(26)：5-9.
WU Qin，RUI Zhiyuan，YANG Jianjun，et al. The Stiffness Modeling and Simulation of Ball Screw Feed System [J]. Modern Manufacturing Engineering，2010，11(26)：5-9.
[13]罗亮，张为民，周敏剑，等. 滚珠丝杠进给系统动态特性集中质量建模与仿真[J]. 农业机械学报，2015，46(12)：370-377.
LUO Liang，ZHANG Weimin，ZHOU Minjian,et al. Dynamic Characteristics Modeling and Simulation of Ball Screw Feed Drive System Based on Lumped Mass Model [J]. Transactions of the Chinese Society for Agricultural Machinery，2015，46(12)：370-377.
[14]XIAO J M，ZHENG X M，WANG X H，et al.A Modified Artificial Fish-swarm Algorithm [C] //Proceedings of the World Congress on Intelligent Control and Automation(WCICA).Washington: IEEE，2006:3456-3460.
[15]WANG L G，HONG Y.A Multivalent Artificial Fish-swarm Algorithm[C]//The 7th World Congress on Intelligent Control and Automation.Washington: IEEE，2008:3161-3166.
[16]GELENBE E，SCHMAJUK N，STADDON J，et al.Autonomous Search by Robots and Animals: a Survey [J].Robotics and Autonomous Systems，1997，22(1): 23-34.
[17]李晓磊，邵之江，钱积新.一种基于动物自治体的寻优模式: 鱼群算法[J]. 系统工程理论与实践，2002，22(11):32-38.
LI Xiaolei，SHAO Zhijiang， QIAN Jixin.An Optimizing Method Based on Autonomous Animates: Fish-swarm Algorithm［J］.Systems Engineering—Theory ＆ Practice，2002，22(11): 32-38.