机械弹性车轮结构参数对汽车侧翻稳定性的影响

摘要/Abstract

摘要： 为深入研究机械弹性车轮（MEW）的结构参数对汽车侧翻稳定性的具体影响，利用刷子理论模型建立了MEW稳态侧偏简化理论模型，利用理论、试验以及数值仿真等方法，分析了结构参数（包括几何参数和材料参数）对MEW侧偏特性的具体影响。以改进的载荷转移率作为侧翻稳定性的评价指标建立了匹配MEW的整车非线性3-DOF侧翻预测模型，研究了车轮侧偏力学特性对侧翻稳定性的具体影响规律。结果表明：铰链组结构参数对侧偏特性影响较小，适当增大弹性环分布高度、减小輮轮断面高宽比和初始剪切模量可以增大车轮侧偏刚度和侧向力峰值，进而提高匹配机械弹性车轮汽车的侧翻稳定性。

关键词: 机械弹性车轮, 结构参数, 刷子模型, 侧翻稳定性, 汽车

Abstract:

Aiming to analyse the influences of the structure parameters of MEWs on rollover stability of an off-road vehicle, a corrected steady-state cornering model of MEWs was set up with the brush tire model. According to the theoretical, experimental and simulation results, the specific impacts of structure parameters(including geometric and material parameters) on cornering characteristics of MEWs were analyzed. Then, a nonlinear 3-DOF vehicle model for rollover prediction with MEWs was built up, which utilized a predictive load transfer ratio(PLTR) as the rollover index. The cornering properties of MEWs to rollover stability were analyzed. The results show that the influences of structure parameters of hinge-group on lateral stiffness properties are not obvious. And as cornering stiffness and peak value of lateral forces increase by increasing the vertical distribution of snap ring and decreasing the aspect ratio and shear modulus of flexible tire body, the vehicle may achieve a better rollover stability.

Key words: mechanical elastic wheel（MEW）, structure parameter, brush tire model, rollover stability, vehicle

中图分类号:

U461.91

李海青；赵又群. 机械弹性车轮结构参数对汽车侧翻稳定性的影响[J]. 中国机械工程.

LI Haiqing；ZHAO Youqun. Effects of Structure Parameters of MEWs on Vehicle Rollover Stability[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2019/V30/I13/1519

参考文献

[1]李占旗. 基于差动制动的汽车横摆与侧翻稳定性集成控制研究[D]. 长春：吉林大学, 2011.
LI Zhanqi. Research on Integrated Control of Vehicle Yaw and Rollover Stability Based on Differential Braking[D]. Changchun：Jilin University, 2011.
[2]National Highway Traffic Safety Administration. Traffic Safety Facts 2013: a Compilation of Motor Vehicle Crash Data from the Fatality Analysis Reporting System and the General Estimates System[M]. Washington DC： US Department of Transportation, 2013.
[3]金智林，翁建生，胡海岩.汽车侧翻及稳定性分析[J].机械科学与技术，2007, 26(3):355-358.
JIN Zhilin，WENG Jiansheng，HU Haiyan. Analysis of Vehicle's Rollover Stability[J]. Mechanical Science and Technology, 2007, 26(3):355-358.
[4]YANG X J. Improvements in Vehicle Handling and Stability by a Novel Wheel Slip Coordination Control Scheme[J].International Journal of Vehicle Design, 2013, 62(2/4): 206-230.
[5]LI L, LU Y S, WANG R R, et al. A 3-Dimentional Dynamics Control Framework of Vehicle Lateral Stability and Rollover Prevention via Active Braking with MPC [J]. IEEE Transactions on Industrial Electronics, 2016, 99(6)：1-12.
[6]WU J, CHENG S, LIU B, et al. A Human-machine- cooperative-driving Controller Based on AFS and DYC for Vehicle Dynamic Stability[J]. Energies, 2017, 10(11):1737.
[7]WU J, ZHAO Y Q, JI X W, et al. Generalized Internal Model Robust Control for Active Front Steering Intervention [J]. Chinese Journal of Mechanical Engineering, 2015, 28(2): 285-293.
[8]YIM S, PARK Y, YI K. Design of Active Suspension and Electronic Stability Program for Rollover Prevention[J]. International Journal of Automotive Technology, 2010, 11(2):147-153.
[9]LI Haiqing, ZHAO Youqun, LIN Fen, et al. Nonlinear Dynamics Modeling and Rollover Control of an Off-road Vehicle with Mechanical Elastic Wheel[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2018, 40(2): 1-17.
[10]ALEKSANDER H. Rollover Stability Index Including Effects of Suspension Design[J]. Proceedings of the Society for Experimental Biology and Medicine, 2004, 139:582-586.
[11]王国林, 梁辛欣. 基于操纵稳定性的轮胎特性匹配汽车操纵逆动力学研究[J]. 中国机械工程, 2013, 24(3):422-425.
WANG Guolin, LIANG Xinxin. Research on Vehicle Inverse Dynamics Based on Compages of Tire' Characteristics for Handing and Stability[J]. China Mechanical Engineering, 2013, 24(3): 422-425.
[12]胥永宫. 轿车轮胎操纵稳定性匹配研究[D]. 长春：吉林大学, 2011.
XU Yonggong.Research on the Match of Vehicle and Tire Based on Handling and Stablility[D]. Changchun：Jilin University, 2011.
[13]郑宏宇，宗长富，刘海贞. 汽车爆胎特性建模与主动制动控制策略[J]. 中国公路学报, 2012, 25(4): 147-152.
ZHENG Hongyu, ZONG Changfu, LIU Haizhen. Tire Blow-out Modeling and Active Braking Control Algorithm of Vehicle[J]. China Journal of Highway and Transport, 2012, 25(4): 147-152.
[14]付宏勋,赵又群,林棻,等. 胎圈结构参数对机械弹性车轮接地压力分布的影响[J]. 农业工程学报, 2015, 31(17): 57-64.
FU Hongxun, ZHAO Youqun, LIN Fen. Influences of Bead Structure Parameters on Contact Pressure Distribution of Mechanical Elastic Wheel[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(17): 57-64.
[15]ZHAO Youqun, ZANG Liguo, CHEN Yueqiao, et al. Non-pneumatic Mechanical Elastic Wheel Natural Dynamic Characteristics and Influencing Factors[J]. Journal of Central South University, 2015, 22(5):1707-1715.
[16]LI Bo, ZHAO Youqun, ZANG Liguo, et al. Driving Force Model for Non-pneumatic Elastic Wheel[J]. Transactions of Nanjing University of Aeronautics and Astronautics, 2016, 33(2): 231-236.
[17]DU Xianbin, ZHAO Youqun, LIN Fen, et al. Numerical and Experimental Investigation on the Camber Performance of a Non-pneumatic Mechanical Elastic Wheel[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2017, 39(9):3315-3327.
[18]赵又群, 李小龙, 张明杰,等. 机械弹性车轮随机振动理论与数值分析[J]. 哈尔滨工业大学学报, 2015, 47(7):47-51.
ZHAO Youqun, LI Xiaolong, ZHANG Mingjie, et al. Theoretical and Numerical Analysis on Mechanical Elastic the Random Vibration of Wheel[J]. Journal of Harbin Institute of Technology, 2015, 47(7):47-51.
[19]汪伟, 赵又群, 黄超,等. 新型机械弹性车轮的建模与通过性研究[J].中国机械工程, 2013, 24(6):724-729.
WANG Wei, ZHAO Youqun, HUANG Chao, et al. Modeling and Trafficability Analysis of New Mechanical Elastic Wheel[J]. China Mechanical Engineering, 2013, 24(6): 724-729.