层状金属复合板带铸轧复合技术研究进展

摘要/Abstract

摘要： 介绍了层状金属复合板带铸轧复合技术的发展背景和意义，概述了近年来固-液铸轧复合工艺和液-液铸轧复合工艺开发现状及研究成果，对比分析了传统的固-固相、固-液相金属界面结合机理和铸轧复合机理的区别，并结合研究现状，从产品极限规格、产品种类、复合界面性能调控、全生命周期理论等方面对层状金属复合材料铸轧复合工艺发展进行了展望。

关键词: 层状金属复合板带, 铸轧复合, 固-液铸轧复合, 液-液铸轧复合, 界面结合机理

Abstract: The development background and significance of cast-rolling bonding technology for laminated metal clad strip were introduced herein. The development status and research results of solid-liquid cast-rolling bonding processes and liquid-liquid cast-rolling bonding processes in recent years were summarized. The bonding mechanism differences among the traditional solid-solid bonding, solid-liquid bonding and the cast-rolling bonding were compared and analyzed. Combined with research status, the developments of the cast-rolling bonding technology for laminated metal clad materials were forecasted in terms of product specifications, product types, interface performance controls, and whole life cycle theory et al.

Key words: laminated metal clad strip； cast-rolling bonding； solid-liquid cast-rolling bonding； liquid-liquid cast-rolling bonding, interface bonding mechanism

中图分类号:

TG335

季策1,2;黄华贵1,2;孙静娜1,2;刘文文1,2. 层状金属复合板带铸轧复合技术研究进展[J]. 中国机械工程.

JI Ce1,2;HUANG Huagui1,2;SUN Jingna1,2;LIU Wenwen1,2. Research Progresses on Cast-rolling Bonding Technology of Laminated Metal Clad Strips[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2019/V30/I15/1873

参考文献

[1]徐涛. 金属层状复合材料的发展与应用[J]. 轻合金加工技术, 2012, 40（6）: 7-10.
XU Tao. Development and Application of Laminated-metal Composite[J]. Light Alloy Fabrication Technology, 2012, 40（6）: 7-10.
[2]张荻, 张国定, 李志强. 金属基复合材料的现状与发展趋势[J]. 中国材料进展, 2010, 29(4): 1-7.
ZHANG Di, ZHANG Guoding, LI Zhiqiang. The Current State and Trend of Metal Matrix Composites[J]. Materials China, 2010, 29(4): 1-7.
[3]刘晓涛, 张廷安, 崔建忠. 层状金属复合材料生产工艺及其新进展[J]. 材料导报, 2002, 16(7): 41-43.
LIU Xiaotao, ZHANG Ting'an, CUI Jianzhong. Technology of Clad Metal Production and Its Latest Progress[J]. Materials Review, 2002, 16(7): 41-43.
[4]刘环, 郑晓冉. 层状金属复合板制备技术[J]. 材料导报, 2012, 40（增刊2）: 131-134.
LIU Huan, ZHENG Xiaoran. The Manufacturing Technique of Clad Metals Sheet[J]. Materials Review, 2012, 40（S2）: 131-134.
[5]杨益航, 王德志, 林高用, 等. 层状功能材料的研究与发展[J]. 材料导报, 2011, 25（9）: 10-13.
YANG Yihang, WANG Dezhi, LIN Gaoyong， et al. Review in Research and Development of Laminated Functional Material[J]. Materials Review, 2011, 25（9）: 10-13.
[6]刘丽丽, 轩福贞. 拉伸载荷下304L/533B爆炸复合板界面损伤的原位观察[J]. 中国机械工程, 2016, 27(23): 3235-3240.
LIU Lili, XUAN Fuzhen. In Situ Observation on Interfacial Damages of 304L/533B Explosive Weld Composite Steel Sheet under Tensile Loading[J]. China Mechanical Engineering, 2016, 27(23): 3235-3240.
[7]余超, 吴宗河, 郭子楦,等. 热轧钛/钢复合板显微组织和性能[J]. 钢铁, 2018, 53(4): 42-47.
YU Chao, WU Zonghe, GUO Zixuan, et al. Microstructure and Properties of Hot-rolled Bonded Titanium Clade Steel Plate[J]. Iron and Steel, 2018, 53(4): 42-47.
[8]董伊康. 双金属复合带材固-液铸轧成形数值模拟及复合机理实验研究[D]. 秦皇岛：燕山大学, 2016.
DONG Yikang. Numerical Simulation and Experimental Research on Bonding Mechanism of Solid-liquid Cast-rolling of Bimetal Clad Strip[D]. Qinhuangdao： Yanshan University, 2016.
[9]GRYDIN O, GERSTEIN G, NRNBERGER F, et al. Twin-roll Casting of Aluminum-steel Clad Strips[J]. Journal of Manufacturing Processes, 2013, 15(4): 501-507.
[10]HUANG H G, DONG Y K, YAN M, et al. Evolution of Bonding Interface in Solid-liquid Cast-rolling Bonding of Cu/Al Clad Strip[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(5): 1019-1025.
[11]HUANG H G, CHEN P, JI C. Solid-liquid Cast-rolling Bonding (SLCRB) and Annealing of Ti/Al Cladding Strip[J]. Materials & Design, 2017, 118: 233-244.
[12]VIDONI M, ACKERMANN R, RICHTER S, et al. Production of Clad Steel Strips by Twin-roll Strip Casting[J]. Advanced Engineering Materials, 2015, 17(11): 1588-1597.
[13]MNSTER D, VIDONI M, HIRT G. Effects of Process Parameter Variation on the Bonding Strength in Clad Steel Strips by Twin-roll Strip Casting[J]. Materials Science Forum, 2016, 854: 124-130.
[14]MNSTER D, ZHANG B, HIRT G. Processing of Clad Steel Strips Consisting of a High Manganese and Stainless Steel Pairing Produced by Twin-roll Casting[J]. Steel Research International, 2016, 87: 1-7.
[15]张鹏, 曾大本, 崔建忠, 等. 钢-Al-28Pb复合板的半固态加工[J]. 清华大学学报（自然科学版）, 2002(增刊1): 65-68.
ZHANG Peng, ZENG Daben, CUI Jianzhong, et al. Semi-solid Processing of Steel-Al-28Pb Bonding Plate[J]. Journal of Tsinghua University (Science and Technology), 2002(S1): 65-68.
[16]张鹏, 杜云慧, 曾大本, 等. 钢-Al-20Sn复合板的非均匀扩散复合研究[J]. 复合材料学报, 2002, 19(1): 46-49.
ZHANG Peng, DU Yunhui, ZENG Daben, et al. Study on Steel-Al-20Sn Nonhomogeneous Diffusion Bonding[J]. Acta Materiae Compositae Sinica, 2002, 19(1): 46-49.
[17]张华, 张鹏, 杜云慧, 等. 钢-半固态Al-7石墨复合界面特性[J]. 清华大学学报(自然科学版), 2004, 44(11): 1468-1470.
ZHANG Hua, ZHANG Peng, DU Yunhui, et al. Interface Characteristics of Steel-mushy Al-7 Graphite Bonding[J]. Journal of Tsinghua University (Science and Technology), 2004, 44(11): 1468-1470.
[18]CHEN G, LI J T, YU H L, et al. Investigation on Bonding Strength of Steel/Aluminum Clad Sheet Processed by Horizontal Twin-roll Casting, Annealing and Cold Rolling[J]. Materials & Design, 2016, 112: 263-274.
[19]CHEN G, LI J T, XU G M. Bonding Process and Interfacial Reaction in Horizontal Twin-roll Casting of Steel/Aluminum Clad Sheet[J]. Journal of Materials Processing Technology, 2017, 246: 1-12.
[20]路王珂, 谢敬佩, 王爱琴, 等. 退火温度对铜铝铸轧复合板界面组织和力学性能的影响[J]. 机械工程材料, 2014, 38(3): 14-17.
LU Wangke, XIE Jingpei, WANG Aiqin, et al. Effects of Annealing Temperature on Interfacial Microstructure and Mechanical Properties of Cu/Al Roll-casted Composite Plate[J]. Materials for Mechanical Engineering, 2014, 38(3): 14-17.
[21]路王珂, 谢敬佩, 王爱琴, 等. 铜铝复合板界面组织和性能研究[J]. 特种铸造及有色合金, 2014, 34(2): 198-200.
LU Wangke, XIE Jingpei, WANG Aiqin, et al. Bonding Interface Structure and Properties of Copper and Aluminum Composite Plate[J]. Special-cast and Non-ferrous Alloys, 2014, 34(2): 198-200.
[22]张衡, 谢敬佩, 尚郑平, 等. 铸轧法制备铜-铝-铜复合板的界面组织与性能[J]. 河南科技大学学报（自然科学版）, 2015, 36(3): 1-5.
ZHANG Heng, XIE Jingpei, SHANG Zhengping, et al. Bonding Interface Structure and Properties of Cu-Al-Cu Compound Plate Fabricated by Cast-rolled Process[J]. Journal of Henan University of Science and Technology（Natural Science）, 2015, 36(3): 1-5.
[23]张衡, 谢敬佩, 尚郑平, 等. 冷轧压下率对Cu/Al复合板界面和性能的影响[J]. 河南科技大学学报（自然科学版）, 2015，36(1): 9-12.
ZHANG Heng, XIE Jingpei, SHANG Zhengping, et al. Effects of Cold-rolling Reduction Ratio on Interface and Performance of Cu/Al Composite Plate[J]. Journal of Henan University of Science and Technology（Natural Science）, 2015，36(1): 9-12.
[24]黄华贵, 王巍, 季策, 等. 生产网状增强夹层复合材料的固液铸轧复合设备及方法:中国， ZL201510812235.5 [P]. 2016-02-03.
HUANG Huagui, WANG Wei, JI Ce, et al. Solid-liquid Cast-rolling Compounding Device and Method for Producing Reticular Reinforcement Interlayer Composite Material: China, ZL201510-812235.5[P]. 2016-02-03.
[25]HAGA T, SUZUKIB S. A Twin-roll Caster to Cast Clad Strip[J]. Journal of Materials Processing Technology, 2003, 138: 366-371.
[26]HAGA T, TSUGE H, ISHIHARA T, et al. A Vertical Type Tandem Twin Roll Caster for Clad Strip Equipped with a Scraper[J]. Key Engineering Materials, 2014, 611/612: 623-628.
[27]NAKAMURA R, YAMABAYASHI T, HAGA T, et al. Roll Caster for the Three-layer Clad-strip[J]. Archives of Materials Science and Engineering, 2010, 41(2): 112-120.
[28]NAKAMURA R, HAGA T, KUMAI S, et al. Casting of Aluminium Alloy Clad Strip Using a Vertical Type Tandem Twin Roll Caster[C]∥Proceedings of the 36th International MATADOR Conference. London:Springer , 2010: 1053-1056.
[29]KUMAI S, TAKAYAMA Y, NAKAMURA R, et al. Application of Vertical-type High-speed Twin-roll Casting for Up-grade Recycling and Clad Sheets Fabrication of Aluminum Alloys[J]. Materials Science Forum, 2016, 877: 56-61.
[30]HARADA H, NISHIDA S I, SUZUKI M, et al. Direct Cladding from Molten Metals of Aluminum and Magnesium Alloys Using a Tandem Horizontal Twin Roll Caster[J]. Applied Mechanics & Materials, 2015, 772: 250-256.
[31]沈启明. 双辊铸轧复合带材的数值模拟及实验研究[D]. 沈阳：东北大学, 2008: 22-45.
SHEN Qiming. Numerical Simulation and Experimental Study of Twin Roll Strip Casting Compound Strip[D]. Shenyang: Northeastern University, 2008: 22-45.
[32]黄华贵, 刘文文, 叶丽芬, 等. 采用单机双流连续铸轧双金属复合板带材的设备及方法:中国，ZL201310525144.4[P]. 2014-05-07.
HUANG Huagui, LIU Wenwen, YE Lifen, et al. Equipment and Method Using Single-machine Dual-flow Continuous Cast-rolling Bimetallic Clad Strip: China, ZL201310525144.4[P]. 2014-05-07.
[33]HAGA T, INUI H, WATARI H, et al. Casting of Al-Si Hypereutectic Aluminum Alloy Strip Using an Unequal Diameter Twin Roll Caster[J]. Journal of Materials Processing Technology, 2007, 191(1/3): 238-241.
[34]XIAO H, QI Z, YU C, et al. Preparation and Properties for Ti/Al Clad Plates Generated by Differential Temperature Rolling[J]. Journal of Materials Processing Technology, 2017,249: 285-290.
[35]叶丽芬. Cu/Al复合板单机双流铸轧复合界面多尺度模拟与实验研究[D]. 秦皇岛: 燕山大学, 2015.
YE Lifen. Multi-scale Simulation and Experiment Research of Cu/Al Cladding Strip Bonding Interface in Single Facility Double Flow Cast-rolling Process[D]. Qinhuangdao: Yanshan University, 2015.
[36]黄华贵, 燕猛, 季策, 等. 一种双金属复合板电脉冲固液铸轧设备及方法:中国，ZL201510040540.7[P]. 2015-05-27.
HUANG Huagui, YAN Meng, JI Ce, et al. Double-metal Composite Plate Electric Pulse Solid-liquid Cast-rolling Device and Method: China, ZL201510040540.7[P]. 2015-05-27.
[37]吕野楠, 许光明, 丁韧,等. 脉冲电流对5052铝合金铸轧板材组织的影响[J]. 轻合金加工技术, 2018,46(1): 9-13.
LYU Yenan, XU Guangming, DING Ren, et al. Effect of Pluse Current in Roll Casting on the Microstructure of 5052 Aluminum Alloy Sheet[J]. Light Alloy Fabrication Technology, 2018,46(1): 9-13.
[38]池慧. 双金属复合板带双辊连续铸轧制备工艺关键技术研究[D]. 秦皇岛: 燕山大学, 2013.
CHI Hui. The Research on the Key Technologies of Cladding Strip Continuous Casting Process Using a Twin Roll Caster[D]. Qinhuangdao: Yanshan University, 2013.
[39]张红安, 陈刚. 铜/铝复合材料的固-液复合法制备及其界面结合机理[J]. 中国有色金属学报, 2008, 18(3): 414-420.
ZHANG Hong'an, CHEN Gang. Fabrication of Cu/Al Compound Materials by Solid-liquid Bonding Method and Interface Bonding Mechanism[J]. The Chinese Journal of Nonferrous Metals, 2008, 18(3): 414-420.
[40]刘平, 刘腾, 王渠东. 固液双金属复合铸造研究进展[J]. 材料导报, 2014, 28(1): 26-30.
LIU Ping, LIU Teng, WANG Qudong. Research Progress on Liquid-solid Bimetal Compound Casting[J]. Materials Review, 2014, 28(1): 26-30.
[41]黄华贵, 季策, 董伊康, 等. Cu/Al复合带固-液铸轧热-流耦合数值模拟及界面复合机理[J]. 中国有色金属学报, 2016, 26(3): 623-629.
HUANG Huagui, JI Ce, DONG Yikang, et al. Thermal-flow Coupled Numerical Simulation and Experimental Research on Bonding Mechanism of Cu/Al Composite Strip by Solid-liquid Cast-rolling[J]. The Chinese Journal of Nonferrous Metals, 2016, 26(3): 623-629.
[42]GRYDIN O, SCHAPER M, STOLBCHENKO M. Comparison of Twin-roll Casting and High-temperature Roll Bonding for Steel-clad Aluminum Strip Production[C]∥TMS Light Metals 2015. Oberursel, 2015: 1225-1230.
[43]黄华贵, 季策, 董伊康, 等. 双金属复合管固-液铸轧复合工艺环形布流器设计及其流场模拟[J]. 复合材料学报, 2016, 33(10): 2246-2252.
HUANG Huagui, JI Ce, DONG Yikang, et al. Design and Flow Field Simulation of Annular Delivery Device for Solid-liquid Cast-rolling Bonding Process of Bimetallic Clad Pipe[J]. Acta Materiae Compositae Sinica, 2016, 33(10): 2246-2252.
[44]黄华贵, 季策, 杜凤山. 双金属复合管固-液铸轧复合轧制力模型研究[J]. 机械工程学报, 2017, 53(10): 10-17.
HUANG Huagui, JI Ce, DU Fengshan. Research on Cast-rolling Force Calculation Model in Solid-liquid Cast-rolling Bonding (SLCRB) Process of Bimetallic Clad Pipe[J]. Journal of Mechanical Engineering, 2017, 53(10): 10-17.
[45]HUANG H G, JI Ce, YANG Z Q, et al. Implementation and Forming Mechanism of the Solid-liquid Cast-rolling Bonding (SLCRB) Process for Steel/Al Clad Pipes[J]. Journal of Manufacturing Processes, 2017, 30: 343-352.
[46]JI Ce, HUANG H G, SUN J N. Process Window Prediction of Solid-liquid Cast-rolling Bonding (SLCRB) Process through Numerical Analysis to Fabricate Bimetallic Clad Pipes[J]. International Journal of Heat and Mass Transfer, 2018, 120: 1305-1314.
[47]JI Ce, HUANG H G, SUN J N, et al. Experiment and Simulation Research on Bonding Mechanism of Bimetallic Clad Pipes Fabricated by Solid-liquid Cast-rolling Bonding (SLCRB) Process[J]. Journal of Manufacturing Processes, 2018, 34: 593-602.