冷水机组机架减振效果分析

中国机械工程

冷水机组机架减振效果分析

么宇辉1;丁亮2;王箫剑1;李志深1;李鸿光1

1.上海交通大学机械系统与振动国家重点实验室,上海,200240
2.中国船舶重工集团公司第704研究所,上海,200031

出版日期:2019-08-25 发布日期:2019-08-27
基金资助:
国家自然科学基金资助项目(11427801)

Analysis of Vibration Suppression Effectiveness on Frames of Water-cooled Chillers

YAO Yuhui1;DING Liang2;WANG Xiaojian1;LI Zhishen1;LI Hongguang1

1.State Key Laboratory of Mechanical System and Vibration,Shanghai Jiao Tong University,Shanghai,200240
2.Shanghai Marine Equipment Institute,Shanghai,200031

Online:2019-08-25 Published:2019-08-27

摘要/Abstract

摘要： 根据冷水机组结构特性设计了一种减振机架,并利用ANSYS对其固有频率和模态进行了计算；提出了一种利用频响函数法对冷水机组机架的减振效果进行评估的方法,通过ANSYS仿真得到了其频响函数,最后通过实验验证了该方法的可行性。结果表明,该机架具有明显的减振效果,频响函数法可以有效地评估机组或部件的减振效果。

关键词: 频响函数, 涡旋压缩机, 冷水机组, 机架, 减振

Abstract: A vibration suspend frame was designed according to the structural characteristics of the chiller,and the natural frequencies and modes were calculated by ANSYS software.An evaluation method for vibration suppression effectiveness on the chiller frames was presented using FRF.The FRF was obtained through simulation method by ANSYS software,and the feasibility of the method was verified by experiments.The results show that the designed frame has an obvious vibration suppression effectiveness,and the FRF method may effectively evaluate the vibration suppression effectiveness of the units or components.

Key words: frequency response function (FRF), scroll compressor, water-cooled chiller, frame, vibration suppression

中图分类号:

TH113.1

么宇辉1;丁亮2;王箫剑1;李志深1;李鸿光1. 冷水机组机架减振效果分析[J]. 中国机械工程.

YAO Yuhui1;DING Liang2;WANG Xiaojian1;LI Zhishen1;LI Hongguang1. Analysis of Vibration Suppression Effectiveness on Frames of Water-cooled Chillers[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2019/V30/I16/1891

参考文献

[1]柳蕾.船用冷水机组结构和特点[J].低温与特气,2007(1):28-30.
LIU Lei.Structure and Advantage of Marine Cooling-water Unit [J].Low Temperature and Specialty Gases,2007(1):28-30.
[2]张景卫,陈华,梁杰荣,等.船用水冷冷水机组的抗振设计[J].制冷与空调,2014,14(8):42-45.
ZHANG Jingwei,CHEN Hua,LIANG Jierong,et al.Anti-vibration Design of Marine Water-cooled Chiller [J].Refrigeration and Air-conditioning,2014,14(8):42-45.
[3]桂伟兵,李海生,武涛,等.涡旋压缩机振动测试的试验研究[J].流体机械,2016,44(11):1-5.
GUI Weibing,LI Haisheng,WU Tao,et al.Experimental Study on the Vibration Testing of Scroll Compressor [J].Fluid Machinery,2016,44(11):1-5.
[4]李锋,杜强.基于频响函数的转盘振动响应预测[J].噪声与振动控制,2015,35(3):121-123.
LI Feng,DU Qiang.Prediction of Turntable Vibration Based on the Frequency Response Functions [J].Noise and Vibration Control,2015,35(3):121-123.
[5]郭铁能,李玲,蔡力钢,等.基于频响函数辨识机械结合部动态参数的研究[J].振动与冲击,2011,30(5):69-72.
GUO Tieneng,LI Ling,CAI Ligang,et al.Identifying Mechanical Joint Dynamic Parameters Based on Measured Frequency Response Functions [J].Journal of Vibration and Shock,2011,30(5):69-72.
[6]MEHRPOUYA M ,GRAHAM E ,PARK S S .FRF Based Joint Dynamics Modeling and Identification [J].Mechanical Systems and Signal Processing,2013,39(1/2): 265-279.
[7]朱坚民,何丹丹.基于频响函数分析的主轴-刀柄-刀具结合面轴向分布参数辨识[J].中国机械工程,2017,28(16):1891-1898.
ZHU Jianmin,HE Dandan.Identification of Axial Distribution Joint Parameters of Interfaces among Spindle-holder-tool Based on Frequency Response Function Analysis [J].China Mechanical Engineering,2017,28(16):1891-1898.
[8]杨彦芳,宋玉普,纪卫红.基于实测频响函数主成分的在役网架损伤识别方法[J].振动与冲击,2007(9):128-132.
YANG Yanfang,SONG Yupu,JI Weihong.An Identification Method of Existing Truss Structural Damage Based on Principal Component Analysis Measured Frequency Response Functions [J].Journal of Vibration and Shock,2007(9):128-132.
[9]朱坚民,王健,张统超,等.一种改进的基于响应耦合子结构法的刀尖点频响函数预测方法[J].中国机械工程,2015,26(3):285-292.
ZHU Jianmin,WANG Jian,ZHANG Tongchao,et al.An Improved Tool Point Frequency Response Function Prediction Method Based on RCSA [J].China Mechanical Engineering,2015,26(3):285-292.
[10]YANG Y,ZHANG W H,MA Y C,et al.Generalized Method for the Analysis of Bending,Torsional and Axial Receptances of Tool-holder-spindle Assembly [J].International Journal of Machine Tools and Manufacture,2015,99 :48-67.

[1]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[2]	王昕, 代亮成, 杨东晓, 罗贇, 池茂儒, 郭兆团, 曾鹏程. 车端侧滚减振装置对高速双层动车组动力学性能的影响分析[J]. 中国机械工程, 2024, 35(04): 742-751.
[3]	朱晨, 池茂儒, 赵明花, 代亮成, 陈仕祺. 连通式横向减振器在地铁车辆上的适用性分析[J]. 中国机械工程, 2023, 34(06): 660-667，676.
[4]	梁志强, 石贵红, 杜宇超, 叶玉玲, 籍永建, 陈司晨, 仇天阳, 刘志兵, 周天丰, 王西彬. 考虑主轴-刀柄结合面特性的机器人铣削系统刀尖频响预测研究[J]. 中国机械工程, 2023, 34(01): 2-9.
[5]	章新, 睢志伟, 李占龙, 秦园, 王瑶, 董荻, 赵钧铎. 装载机驾驶室非线性减振系统试验与优化[J]. 中国机械工程, 2022, 33(13): 1529-1536.
[6]	刘亚星, 顾清, 钱承, 白振华, . 冷轧超高强钢平直度与断面形状前馈控制技术[J]. 中国机械工程, 2021, 32(24): 2981-2988.
[7]	肖望强, 叶淑祯, 王兴民, 贾尚帅, 潘德阔, 卢大军, . [设计与优化]动车组车体端墙粒子阻尼器减振的数值分析与实验研究[J]. 中国机械工程, 2021, 32(04): 481-489.
[8]	董国疆;颜峰;韩杰;周腾. 转向节疲劳性能与减振器阻尼关系研究[J]. 中国机械工程, 2020, 31(24): 2950-2958.
[9]	张丽霞, 庞齐齐, 潘福全, 葛小菡, 林炳钦, 何一超, 危银涛, 杜永昌. 磁流变减振器魔术公式模型在悬架控制中的应用[J]. 中国机械工程, 2020, 31(14): 1659-1665.
[10]	闫少文;屈文忠;肖黎. 一种基于高频频响函数的无基准疲劳裂纹识别方法[J]. 中国机械工程, 2019, 30(12): 1428-1432,1479.
[11]	彭斌;赵生显;李要红. 新型无油涡旋压缩机性能[J]. 中国机械工程, 2018, 29(24): 2917-2924.
[12]	张新1;宋璇1;蒋励2. 轴系减振器相位角的频域分析提取技术[J]. 中国机械工程, 2018, 29(16): 1943-1946.
[13]	贺红林;夏自强;袁维东. 基于改进优化准则法的自由阻尼结构动力学拓扑优化[J]. 中国机械工程, 2018, 29(13): 1531-1539.
[14]	朱坚民;李尧;何丹丹;田丰庆;李孝茹. 一种新的铣刀刀齿等效直径确定方法[J]. 中国机械工程, 2018, 29(05): 558-564.
[15]	彭虎1;张进秋2;刘义乐2;彭志召2;张建2;张立君3. 复合式电磁作动器设计及特性试验[J]. 中国机械工程, 2018, 29(01): 82-88.