[1]SHI H, SALIM H, SHI Y, et al. Geometric and Material Nonlinear Static and Dynamic Analysis of Space Truss Structures[J]. Mechanics Based Design of Structures and Machines, 2015, 43(1):38-56.
[2]ERKAYA S. Clearance-induced Vibration Responses of Mechanical Systems: Computational and Experimental Investigations[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2018, 40(2):90.
[3]ERKAYA S, UZMAY I. Experimental Investigation of Joint Clearance Effects on the Dynamics of a Slider-Crank Mechanism[J]. Multibody System Dynamics, 2010, 24(1):81-102.
[4]HOU Y, WANG Y, JING G, et al. Chaos Phenomenon and Stability Analysis of RU-RPR Parallel Mechanism with Clearance and Friction[J]. Advances in Mechanical Engineering, 2018, 10(1): 168781401774625.
[5]BAI Z F, JIANG X, LI F, et al. Reducing Undesirable Vibrations of Planar Linkage Mechanism with Joint Clearance[J]. Journal of Mechanical Science and Technology, 2018, 32(2):559-565.
[6]BAI Z F, ZHAO J J, CHEN J, et al. Design Optimization of Dual-axis Driving Mechanism for Satellite Antenna with Two Planar Revolute Clearance Joints[J]. Acta Astronautica, 2018, 144:80-89.
[7]ERKAYA S, UZMAY I. Effects of Balancing and Link Flexibility on Dynamics of a Planar Mechanism Having Joint Clearance[J]. Scientia Iranica, 2012, 19(3):483-490.
[8]洪昭斌, 陈力, 李文望. 柔性臂杆、柔性关节空间机械臂T-S模糊轨迹跟踪及双柔振动并行综合控制[J]. 中国机械工程, 2016, 27(15):2020-2026.
HONG Zhaobin, CHEN Li, LI Wenwang. T-S Fuzzy Trajectory Tracking and Double-flexible Parallel Control of Flexible-link Flexible-joint Space Manipulator[J]. China Mechanical Engineering, 2016, 27(15): 2020-2026.
[9]KOSHYC S, FLORES P, LANKARANIH M. Study of the Effect of Contact Force Model on the Dynamic Response of Mechanical Systems with Dry Clearance Joints: Computational and Experimental Approaches[J]. Nonlinear Dynamics, 2013, 73(1/2):325-338.
[10]TAN X, CHEN G, SUN D, et al. Dynamic Analysis of Planar Mechanical Systems with Clearance Joint Based on LuGre Friction Model[J]. Journal of Computational and Nonlinear Dynamics, 2018, 13(6):061003.
[11]PENNESTR E, ROSSI V,SALVINI P, et al. Review and Comparison of Dry Friction Force Models[J]. Nonlinear Dynamics, 2016, 83(4):1785-1801.
[12]FLORES P. Modeling and Simulation of Wear in Revolute Clearance Joints in Multibody Systems[J]. Mechanism & Machine Theory, 2009, 44(6):1211-1222.
[13]MACHADO M, COSTA J, SEABRA E, et al. The Effect of the Lubricated Revolute Joint Parameters and Hydrodynamic Force Models on the Dynamic Response of Planar Multibody Systems[J]. Nonlinear Dynamics, 2012, 69(1/2):635-654.
[14]FLORES P, AMBROSIO J, CLAROJ P. Dynamic Analysis for Planar Multibody Mechanical Systems with Lubricated Joints[J]. Multibody System Dynamics, 2004, 12(1):47-74.
[15]李波.空间润滑谐波减速器传动性能正交试验分析[J].机械工程学报,2012,48(3):82-87.LI Bo. Orthogonal Experiment Analysis on Transmission Performance of Space Lubricated Harmonic Drive[J]. Journal of Mechanical Engineering, 2012, 48(3):82-87.
[16]江静华, 蒋建清, 马爱斌,等. 固体润滑膜减摩效果与载荷对应关系的建模分析[J]. 中国表面工程, 2008, 21(2):44-49.JIANG Jinghua, JIANG Jianqing, MA Aibin, et al. Model Analysis for the Relationship of Nominal Load and the Reducing Friction Behavior of Soft Film on Hard Substrate[J]. China Surface Engineering, 2008, 21(2):44-49.
[17]HIROKATA S, KYOICHI U, MAKOTO M, et al. Micro-gravity Experiment of a Space Robotic Arm Using Parabolic Flight[J]. Advanced Robotics, 2004, 18(3):247-267.
[18]MATUNAGA S.Micro-gravity Experiments of Space Robotics and Space-used Mechanisms at Tokyo Institute of Technology[J]. Journal of the Japan Society of Microgravity Application, 2002, 19:105.
[19]FUSARO R L. Preventing Spacecraft Failures Due to Tribological Problems[R]. Cleveland:NASA Glenn Research Center, 2001.
[20]OBARA S, SATO M. Numerical Investigation of Influence of Gravity on the Performance of Ball Bearings Assembled in a Space Device[C]∥Proceedings of the 2nd World Tribology Congress. Vienna, 2001:1-4.
[21]HARRIST A, KORZALAS M N. 滚动轴承分析:轴承技术的基本概念[M]. 北京:机械工业出版社, 2010:233-236.HARRIS T A, KORZALAS M N. Essential Concepts of Bearing Technology:Rolling Bearing Analysis[M]. Beijing:Mechanical Industry Press, 2010:233-236. |