[学科发展]深冷轧制制备高性能金属材料研究进展

摘要/Abstract

摘要： 相对于传统热轧、温轧、冷轧，深冷轧制是一项变革性技术，它利用某些金属材料在深冷情况下具有优异的塑性变形能力以及深冷环境阻碍塑性变形过程中位错运动和再结晶行为，促使材料晶粒细化，材料具有更高的强度与韧性。系统地介绍了近年来深冷轧制制备高性能金属材料的研究进展，包括深冷轧制在铝合金、铜合金、钛合金、复合层状金属带材中的应用。对深冷轧制制备高性能金属材料的研究进行了展望。

关键词: 深冷轧制, 机械性能, 金属与合金, 超细晶材料, 强韧性

Abstract: Compared with conventional hot rolling, warm rolling and cold rolling, cryorolling was an innovative technique. During cryorolling, the ultralow temperature suppressed the dislocation movement and dynamic recovery during deformation, thereby enhancing the grain-refinement, and enhancing both strength and ductility of metals and alloys. The progresses in development of high-performance metals and alloys by using cryorolling were introduced, including aluminium, copper, titanium, as well as metal laminated composites. Finally, prospects for the preparation of high-performance metal materials by using cryrolling in the future were also presented.

Key words: cryorolling, mechanical property, metal and alloy, ultrafine-grained material, high strength and toughness

中图分类号:

TG335

喻海良, . [学科发展]深冷轧制制备高性能金属材料研究进展[J]. 中国机械工程.

YU Hailiang, . Progresses in Fabrication of High-performance Metals by Using Cryorolling[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2020/V31/I01/89

参考文献

[1]VALIEV R Z, LANGDON T G. Principles of Equal-channel Angular Pressing as a Processing Tool for Grain Refinement[J]. Progress in Materials Science, 2006, 51(7):881-981.
[2]ZHILYAEV A P, LANGDON T G. Using High-pressure Torsion for Metal Processing: Fundamentals and Applications[J]. Progress in Materials Science, 2008, 53(6):893-979.
[3]TSUJI N, SAITO Y, LEE S H, et al. ARB (Accumulative Roll-bonding) and Other New Techniques to Produce Bulk Ultrafine Grained Materials[J]. Advanced Engineering Materials, 2003, 5(5):338-344.
[4]YU H L, LU C, TIEU K, et al. Special Rolling Techniques for Improvement of Mechanical Properties of Ultrafine-grained Metal Sheets: a Review[J]. Advanced Engineering Materials, 2016, 18(5):754-769.
[5]ZHEREBTSOV S V, DYAKONOV G S, SALEM A A, et al. Formation of Nanostructures in Commercial-purity Titanium via Cryorolling[J]. Acta Materialia, 2013, 61:1167-1178.
[6]SAGARADZE V V, SHABASHOV V A, KATAEVA N V, et al. Deformation-induced Dissolution of the Intermetallics Ni3Ti and Ni3Al in Austenitic Steels at Cryogenic Temperatures[J]. Philosophical Magazine, 2016, 96:1724-1742.
[7]MA Y, YUAN F, YANG M, et al. Dynamic Shear Deformation of a CrCoNi Medium-entropy Alloy with Heterogeneous Grain Structures[J]. Acta Materialia, 2018, 148:407-418.
[8]KORZNIKOVA G, MIRONOV S, KONKOVA T, et al. EBSD Characterization of Cryogenically Rolled Type 321 Austenitic Stainless Steel[J]. Metallurgical and Materials Transactions A, 2018, 49:6325-6336.
[9]FU B, FU L M, LIU S C, et al. High Strength-ductility Nano-structured High Manganese Steel Produced by Cryogenic Asymmetric-rolling[J]. Journal of Materials Science and Technology, 2018, 34:695-699.
[10]闫亚琼, 罗晋如, 张济山, 等. 强织构AZ31 镁合金板材深低温轧制过程中微观组织演变及力学性能控制研究[J]. 金属学报, 2017, 53(1):107-113.
YAN Yaqiong, LUO Jinru, ZHANG Jishan, et al. Study on the Microstructure Evolution and Mechanical Properties Control of a Strong Textured AZ31 Magnesium Alloy Sheet during Cryorolling[J]. Acta Metallurgica Sinica, 2017, 53(1):107-113.
[11]侯陇刚, 刘明荔, 王新东, 等. 高强7050铝合金超低温大变形加工与组织、性能调控[J]. 金属学报, 2017, 53(9):1075-1090.
HOU Longgang, LIU Mingli, WANG Xindong, et al. Cryogenic Processing High-strength 7050 Aluminum Alloy and Controlling of the Microstructures and Mechanical Properties[J]. Acta Metallurgica Sinica, 2017, 53(9):1075-1090.
[12]ZUIKO I S, MIRONOV S, KAIBYSHEV R. Microstructural Evolution and Strengthening Mechanisms Operating during Cryogenic Rolling of Solutionized Al-Cu-Mg Alloy[J]. Materials Science and Engineering A, 2019, 745:82-89.
[13]HUANG Z W, JIN S B, ZHOU H, et al. Evolution of Twinning Systems and Variants during Sequential Twinning in Cryo-rolled Titanium[J]. International Journal of Plasticity, 2019, 112:52-67.
[14]XU Z, ROVEN H J, JIA Z. Mechanical Properties and Surface Characteristics of an AA6060 Alloy Strained in Tension at Cryogenic and Room Temperature[J]. Materials Science and Engineering A, 2015, 648:350-358.
[15]UMEZAWA O. Tensile Properties and Conductivities of a Precipitation Hardened and Cold-rolled Cu-0.3Cr-0.1Zr Alloy at Cryogenic Temperature[J]. IOP Conf. Series:Materials Science and Engineering, 2015, 102:012006.
[16]WANG Y, MA E, VALIEV R Z, et al. Tough Nanostructured Metals at Cryogenic Temperatures[J]. Advanced Materials, 2004, 16:328-331.
[17]WANG Y, SHI B, HE Y, et al. A Fine Grain, High Mn Steel with Excellent Cryogenic Temperature Properties and Corresponding Constitutive Behaviour[J]. Materials, 2018, 11:253.
[18]ZOHOORI-SHOAR V, ESLAMI A, KARIMZADEH F, et al. Resistance Spot Welding of Ultrafine Grained/Nanostructured Al6061 Alloy Produced by Cryorolling Process and Evaluation of Weldment Properties[J]. Journal of Manufacturing Processes, 2017, 26:84-93.
[19]SHI J T, HOU L G, ZUO J R, et al. Cryogenic Rolling-enhanced Mechanical Properties and Microstructural Evolution of 5052 Al-Mg Alloy[J]. Materials Science and Engineering A, 2017, 701:274-284.
[20]VIGNESHWARAN S, KRISHNA K S V B R, SEKHAR K C, et al. A Study on the Work Hardening and the Effect of Triaxiality on the Fracture Behavior of Some Cryorolled Aluminium Alloys[J]. Materials Science and Engineering A, 2016, 678:165-177.
[21]KUMAR N, JAYAGANTHAN R, BROKMEIER H G. Effect of Deformation Temperature on Precipitation, Microstructural Evolution, Mechanical and Corrosion Behavior of 6082 Al Alloy[J]. Transactions of Nonferrous Metals Society of China, 2017, 27:475-492.
[22]YU H L, LU C, TIEU K, et al. Asymmetric Cryorolling for Fabrication of Nanostructural Aluminum Sheets[J]. Scientific Reports, 2012, 2:772.
[23]YU H L, TIEU K, LU C, et al. Tensile Fracture of Ultrafine Al6061 Sheets by Asymmetric Cryorolling for Microforming[J]. International Journal of Damage Mechanics, 2014, 23:1077-1095.
[24]YU H L, TIEU K, LU C, et al. Mechanical Properties of Al-Mg-Si Alloy Sheets Produced Using Asymmetric Cryorolling and Aging Treatment[J]. Materials Science Engineering A, 2013, 568:212-218.

[25]REZAEI M R, TOROGHINEJAD M R, ASHRAFIZADEH F. Effects of ARB and Aging Processes on Mechanical Properties and Microstructure of 6061 Aluminum Alloy [J]. Journal of Materials Processing Technology, 2011, 211:1184-1190.
[26]REZAEI M R, TOROGHINEJAD M R, ASHRAFIZADEH F. Production of Nano-grained Structure in 6061 Aluminum Alloy Strip by Accumulative Roll Bonding [J]. Materials Science and Engineering A, 2011, 529:442-446.
[27]TAN E, KIBAR A A, GUR C H. Mechanical and Microstructural Characterization of 6061 Aluminum Alloy Strips Severely Deformed by Dissimilar Channel Angular Pressing [J]. Materials Characterization, 2011, 62:391-397.
[28]LOUCIF A, FIGUEIREDO R, BAUDIN T, et al. Microstructural Evolution in an Al-6061 Alloy Processed by High-pressure Torsion [J]. Materials Science and Engineering A, 2010, 527:4864-4869.
[29]MORENO-VALLE E C, SABIROV I, PEREZ-PRADO M T, et al. Effect of the Grain Refinement via Severe Plastic Deformation on Strength Properties and Deformation Behavior of an Al6061 Alloy at Room and Cryogenic Temperatures [J]. Materials Letters, 2010, 65:2917-2919.
[30]THAM Y W, FU M W, HNG H H, et al. Microstructure and Properties of Al-6061 Alloy by Equal Channel Angular Extrusion for 16 Passes [J]. Materials and Manufacturing Processes, 2007, 22:819-824.
[31]FU M W, THAM Y W, HNG H H, et al. The Grain Refinement of Al-6061 via ECAE Processing:Deformation Behavior, Microstructure and Property [J]. Materials Science and Engineering A, 2009, 526:84-92.
[32]SABIROV I, PEREZ-PRADO M T, MURASHKIN M, et al. Application of Equal Channel Angular Pressing with Parallel Channels for Grain Refinement in Aluminium Alloys and Its Effect on Deformation Behavior [J]. International Journal of Material Forming, 2010, 3:411-414.

[33]DHAL A, PANIGRAHI S K, SHUNMUGAM M S. Insight into the Microstructural during Cryo-severe Plastic Deformation and Post-deformation Annealing of Aluminium and Its Alloys[J]. Journal of Alloys and Compounds, 2017, 726:1205-1219.
[34]OCID’KO I A, LANGDON T G. Enhanced Ductility of Nanocrystalline and Ultrafine-grained Metals[J]. Reviews on Advanced Materials Science, 2012, 30:103-111.
[35]FEYISSA F T, KUMAR D R. Enhancement of Drawability of Cryorolled AA5083 Alloy Sheets by Hydroforming[J]. Journal of Materials Research Technology, 2019, 8:411-423.
[36]LU L, SHEN Y, CHEN X, et al. Ultrahigh Strength and High Electrical Conductivity in Copper[J]. Science, 2004, 304:422-426.
[37]TAKATA N, LEE S H, TSUJI N. Ultrafine Grained Copper Alloy Sheets Having both High Strength and High Electric Conductivity[J]. Materials Letters, 2009, 63:1757-1760.
[38]NAGARJUNA S, CHINTA BABU U, GHOSAL P. Effect of Cryo-rolling on Age Hardening of Cu-1.5Ti Alloy[J]. Materials Science and Engineering A, 2008, 491:331-337.
[39]SHANMUGASUNDARAM T, MURTY B S, SARMA V S. Development of Ultrafine Grained High Strength Al-Cu Alloy by Cryorolling[J]. Scripta Materialia, 2006, 54:2013-2017.
[40]BAHMANPOUR H, KAUFFMANN A, KHOSHKHOO M S, et al. Effect of Stacking Fault Energy on Deformation Behavior of Cryo-rolled Copper and Copper Alloys[J]. Materials Science and Engineering A, 2011, 529:230-236.
[41]YU H L, DU Q L, GODBOLE A, et al. Improvement in Strength and Ductility of Asymmetric-cryorolled Copper Sheets under Low-temperature Annealing[J], Metallurgical and Materials Transactions A, 2018, 49(10):4398-4403.
[42]WANG P, JIE J, LIU C, et al. An Effective Method to Obtain Cu-35Zn Alloy with a Good Combination of Strength and Ductility through Cryogenic Rolling[J]. Materials Science and Engineering A, 2018, 715:236-242.
[43]KONKOVA T, MIRONOV S, KORZNIKOV A, et al. Microstructural Response of Pure Copper to Cryogenic Rolling[J]. Acta Materialia, 2010, 58:5262-5273.
[44]WANG Y, CHEN M, ZHOU F, et al. High Tensile Ductility in a Nanostructured Metal[J]. Nature, 2002, 419:912-915.
[45]YU H L, LU C, TIEU K, et al. Simultaneous Grain Growth and Grain Refinement in Bulk Ultrafine-grained Copper under Tensile Deformation at Room Temperature[J]. Metallurgical and Materials Transactions A, 2016,47:3785-3789.
[46]YU H L, WANG L, CHAI L J, et al. High Thermal Stability and Excellent Mechanical Properties of Ultrafine-grained High-purity Copper Sheets subjected to Asymmetric Cryorolling[J]. Materials Characterization, 2019, 153:34-45.
[47]KO Y G, KIM W G, LEE C S, et al. Microstructural Influence on Low-temperature Superplasticity of Ultrafine-grained Ti-6Al-4V Alloy[J]. Materials Science and Engineering A, 2005, 410/411:156-159.
[48]ELIAS C N, MEYERS M A, VALIEV R Z, et al. Ultrafine Grained Titanium for Biomedical Applications:an Overview of Performance[J]. Journal of Materials Research and Technology, 2013, 2:340-350.
[49]BHASKAR P, DASGUPTA A, SARMA V S, et al. Mechanical Properties and Corrosion Behaviour of Nanocrystalline Ti-5Ta-1.8Nb Alloy Produced by Cryo-rolling[J]. Materials Science and Engineering A, 2014, 616:71-77.
[50]YANG D K, CIZEK P, FABIJANIC D, et al. Work Hardening in Ultrafine-grained Titanium:Multilayering and Grading[J]. Acta Materialia, 2013, 61:2840-2852.
[51]ZHEREBTSOV S V, DYAKONOV G S, SALEM A A, et al. Formation of Nanostructures in Commercial-purity Titanium via Cryorolling[J]. Acta Materialia, 2013, 61:1167-1178.
[52]YU H L, YAN M, LI J T, et al. Mechanical Properties and Microstructure of a Ti-6Al-4V Alloy subjected to Cold Rolling, Asymmetric Rolling and Asymmetric Cryorolling[J]. Materials Science and Engineering A, 2018, 710:10-16.
[53]HUANG S, ZONG Y, SHAN D. Application of Thermohydrogen Processing to Ti6Al4V Alloy Blade Isothermal Forging[J]. Materials Science and Engineering A, 2013, 561:17-25.
[54]季策, 黄华贵, 孙静娜, 等. 层状金属复合板带铸轧复合技术研究进展[J].中国机械工程, 2019, 30(15):1873-1881.
JI Ce, HUANG Huagui, SUN Jingna, et al. Research Progresses on Cast-rolling Bonding Technology of Laminated Metal Clad Strips[J]. China Mechanical Engineering, 2019, 30(15):1873-1881.
[55]WANG L, DU Q, LI C, et al. Enhanced Mechanical Properties of Lamellar Cu/Al Composites Processed via High-temperature Accumulative Roll Bonding[J]. Transactions of Nonferrous Metals Society of China, 2019, 29:1621-1630.
[56]KHALEDI K, BREPOLS T, REESE S. A Multiscale Description of Bond Formation in Cold Roll Bonding Considering Periodic Cracking of Thin Surface Films[J]. Mechanics of Materials, 2019, 137:103142.
[57]WANG Z J, MA M, QIU Z X, et al. Microstructure, Texture and Mechanical Properties of AA1060 Aluminum Alloy Processed by Cryogenic Accumulative Roll Bonding[J]. Materials Characterization, 2018, 139:269-278.
[58]TAKAGAWA Y, TSUJIUCHI Y, WATANABE C, et al. Improvement in Mechanical Properties of a Cu-2.0 Mass%Ni-0.5 Mass%Si-0.1 Mass%Zr Alloy by Combining both Accumulative Roll-bonding and Cryo-rolling with Aging[J]. Materials Transactions, 2013, 54:1-8.
[59]YU H L, LU C, TIEU K, et al. Interface Bonding Mechanism of Al/Ti/Al Laminate Sheets subjected to Room-temperature Rolling and Cryorolling[J]. Journal of Materials Research, 2017, 32:3761-3768.
[60]ITO Y, HORITA Z. Microstructural Evolution in Pure Aluminum Processed by High-pressure Torsion[J]. Materials Science and Engineering A, 2009, 503:32-36.
[61]KWAN C C F, WANG Z. Strain Incompatibility and Its Influence on Grain Coarsening during Cyclic Deformation of ARB Copper[J]. Philosophical Magazine, 2013, 93:1065-1079.
[62]STEPANOV N D, KUZNETSOV A V, SALISHCHEV G A, et al. Effect of Cold Rolling on Microstructure and Mechanical Properties of Copper subjected to ECAP with Various Numbers of Passes[J]. Materials Science and Engineering A, 2012, 554:105-115.
[63]HAJIZADEH K, EGHBALI B. Effect of Two-step Severe Plastic Deformation on the Microstructure and Mechanical Properties of Commercial Purity Titanium[J]. Metal Materials International, 2014, 20:343-350.
[64]YU H L, LU C, TIEU K, et al. Fabrication of Ultrathin Nanostructured Bimetallic Foils by Accumulative Roll Bonding and Asymmetric Rolling[J]. Scientific Reports, 2013, 3:2373.
[65]YU H L, TIEU K, LU C, et al. An Investigation of Interface Bonding of Bimetallic Foils by Combined Accumulative Roll Bonding and Asymmetric Rolling[J]. Metallurgical and Materials Transactions A, 2014, 45:4038-4045.
[66]YU H L, TIEU K, HADI S, et al. High Strength and Ductility of Ultrathin Laminate Foils Using Accumulative Roll Bonding and Asymmetric Rolling[J]. Metallurgical and Materials Transactions A, 2015, 46:869-879.
[67]YU H L, WANG H, LU C, et al. Microstructure Evolution of Accumulative Roll Bonding Processed Pure Aluminium during Cryorolling[J]. Journal of Materials Research, 2016, 31:797-805.