基于热四极法的涂层刀具切削温度分布研究

doi:10.3969/j.issn.1004-132X.2020.19.007

摘要/Abstract

摘要： 为研究涂层在切削过程中对刀具温度分布的影响，建立了涂层刀具的三维瞬态热传导分析模型，发展了基于热四极法的切削过程涂层刀具三维温度场求解算法，得到了涂层刀具的瞬态温度分布。研究了涂层厚度、热对流以及界面热阻对涂层刀具切削温度分布的影响，为切削加工中涂层厚度的确定、切削液的选择以及涂层刀具的失效诊断提供了理论依据。

关键词: 涂层刀具, 三维瞬态分析模型, 热四极法, 切削温度

Abstract: In order to study the influences of coating on tool temperature distribution during cutting processes, a three-dimensional transient heat conduction analysis model of coated tools was established, the solving algorithm for three-dimensional temperature field of coated tools was developed based on thermal quadrupole methods and transient temperature distribution of coated tools was obtained. The effects of coating thickness, thermal convection and thermal resistance at interface on the cutting temperature distribution of coated tools were studied, which provide theoretical bases for the determination of coating thickness, choice of cutting fluid and failure diagnosis of coated tools.

Key words: coated tool, three-dimensional transient analysis model, thermal quadrupole method, cutting temperature

中图分类号:

TG501.4

高健;赵自强;王文中. 基于热四极法的涂层刀具切削温度分布研究[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.19.007.

GAO Jian;ZHAO Ziqiang;WANG Wenzhong. Study on Cutting Temperature Distribution of Coated Tools Based on Thermal Quadrupole Methods[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.19.007.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2020.19.007

http://www.cmemo.org.cn/CN/Y2020/V31/I19/2316

参考文献

［1］TRIGGER K J, CHAO B T. An Analytical Evaluation of Metal Cutting Temperature［J］. Journal of Engineering for Industry, 1951,73:57-68.

［2］KOMANDURI R, HOU Z B. Thermal Modeling of the Metal Cutting Process—Part Ⅰ: Temperature Rise Distribution due to Shear Plane Heat Source［J］. International Journal of Mechanical Sciences, 2000, 42(9):1715-1752.

［3］KOMANDURI R, ZHEN B H. Thermal Modeling of the Metal Cutting Process—Part Ⅱ: Temperature Rise Distribution due to Frictional Heat Source at the Tool-Chip Interface［J］. International Journal of Mechanical Sciences, 2001, 43(1):57-88.

［4］KOMANDURI R, ZHEN B H. Thermal Modeling of the Metal Cutting Process—Part Ⅲ: Temperature Rise Distribution due to the Combined Effects of Shear Plane Heat Source and the Tool-Chip Interface Frictional Heat Source［J］. International Journal of Mechanical Sciences, 2001, 43(1):89-107.

［5］RADULESCU R, KAPOOR S G. An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting［J］. Journal of Engineering for Industry, 1994,116(2):135-143.

［6］TAY A A O, STEVENSON M G, DAVIS G D V. Using the Finite Element Method to Determine Temperature Distribution in Orthogonal Machining［J］. Proceedings of the Institution of Mechanical Engineers, 1974,188:627-638.

［7］LEVY E K, TSAI C L, GROOVER M P. Analytical Investigation of the Effect of Tool Wear on the Temperature Variations in a Metal Cutting Tool［J］. Journal of Engineering for Industry, 1976,98:251-257.

［8］CHAN C L, CHANDRA A. A Boundary Element Method Analysis of the Thermal Aspects of Metal Cutting Processes［J］. Journal of Engineering for Industry, 1991, 113(3):311-319.

［9］GRZESIK W. Experimental Investigation of the Cutting Temperature When Turning with Coated Indexable Inserts［J］. International Journal of Machine Tools & Manufacture, 1999, 39(3):355-369.

［10］GRZESIK W. An Integrated Approach to Evaluating the Tribo-contact for Coated Cutting Inserts［J］. Wear, 2000, 240(1):9-18.

［11］GRZESIK W, BARTOSZUK M, NIESLONY P. Finite Difference Method-based Simulation of Temperature Fields for Application to Orthogonal Cutting with Coated Tools［J］. Machining Science and Technology, 2005, 9(4):529-546.

［12］YEN Y C, JAIN A, CHIGURUPATI P, et al. Computer Simulation of Orthogonal Cutting Using a Tool with Multiple Coatings［J］. Machining Science and Technology, 2004, 8(2):305-326.

［13］DU F, LOVELL M R, WU T W. Boundary Element Method Analysis of Temperature Fields in Coated Cutting Tools［J］. International Journal of Solids and Structures, 2001, 38(26):4557-4570.

［14］ZHANG Shijun, LIU Zhanqiang. An Analytical Model for Transient Temperature Distributions in Coated Carbide Cutting Tools［J］. International Communications in Heat and Mass Transfer, 2008, 35(10):1311-1315.

［15］MAILLET D,ANDR S, BATSALE J C, et al. Thermal Quadrupoles［M］. New York:Wiley, 2000.

［16］张士军. 涂层刀具切削温度及其测试技术研究［D］. 济南：山东大学, 2009.

ZHANG Shijun. Research on Cutting Temperature and Testing Technology of Coated Tools［D］. Jinan：Shandong University, 2009.

[1]	李祥, 郑光明, 颜培, 孙作民, 程祥, 刘焕宝. 清洁切削高温合金涂层刀具切削性能及加工表面完整性[J]. 中国机械工程, 2023, 34(04): 454-463.
[2]	吴振宇, 郑光明, 颜培, 杨先海, 赵光喜, 李学伟. 表面处理对TiAlSiN涂层刀具表面完整性及切削性能的影响研究[J]. 中国机械工程, 2023, 34(01): 75-83.
[3]	彭锐涛1;降皓鉴1;唐新姿1;张珊2. 定向内冷车刀及其切削性能[J]. 中国机械工程, 2019, 30(21): 2629-2635,2642.
[4]	谢英星;王成勇;郑李娟;隋建波. 涂层刀具高速铣削淬硬钢的声发射信号特征[J]. 中国机械工程, 2019, 30(17): 2030-2039.
[5]	宦海祥, 徐九华, 苏宏华, 傅玉灿, 梁星慧, 葛英飞. PCD和硬质合金刀具车削钛基复合材料时刀具磨损特征研究[J]. 中国机械工程, 2016, 27(14): 1877-1883.
[6]	刘志军, 全燕鸣. 热管铣刀散热基本结构关键参数优化[J]. 中国机械工程, 2014, 25(24): 3282-3288.
[7]	刘新, 徐文骥, 孙晶, 张琳. 导电加热切削有限元仿真及试验研究[J]. 中国机械工程, 2012, 23(21): 2556-2561.
[8]	盛精1, 黄丛林2, 刘超3, 张碧玉3. 基于切削温度的切削用量优化的实践与研究[J]. 中国机械工程, 2012, 23(17): 2066-2070.
[9]	危卫华, 徐九华, 傅玉灿, 侯红亮, 李志强. 改善钛合金切削加工性的置氢工艺及置氢量优化 [J]. 中国机械工程, 2010, 21(02): 196-201.
[10]	全燕鸣;赵婧;何振威;林金萍;乐有树;. 切削温度测量信号的获取与处理 [J]. J4, 2009, 20(05): 0-537,.
[11]	张士军;;刘战强;. 涂层刀具切削温度自测传感器[J]. J4, 2009, 20(04): 0-382.
[12]	任军学;田卫军;姚倡锋;姜振南;. 钛合金整体结构件高效插铣工艺实验研究[J]. J4, 2008, 19(22): 0-2649.
[13]	赵金龙;邓建新;颜培;. MoS₂/Zr复合涂层高速钢刀具的切削性能研究[J]. J4, 2008, 19(21): 0-2524.