氧化铝空心球砂带磨削钛合金的材料去除及表面质量研究

doi:10.3969/j.issn.1004-132X.2020.19.013

摘要/Abstract

摘要： 为了解决航空发动机钛合金叶片磨削加工中砂带使用寿命不足的问题，采用新型氧化铝空心球开展钛合金试样砂带磨削的相关工艺试验研究。通过单因素试验分析氧化铝空心球砂带加工钛合金板材中工艺参数对表面粗糙度和磨削比的影响，确定空心球砂带磨削钛合金参数的合理范围，进而通过正交试验研究磨削压力、磨削线速度、进给速度以及磨粒粒度等因素对表面粗糙度和磨削比的影响程度，确定空心球砂带磨削钛合金的最优工艺参数组合。

关键词: 砂带, 空心球, 钛合金, 磨削比, 表面粗糙度

Abstract: To solve the problems of shortlife of abrasive belt in aero-engine titanium alloy blade grinding, experimental research on abrasive belt grinding processes of titanium alloy samples was carried out on a new type of alumina hollow-sphere abrasive belt. The effects of processing parameters on the surface roughness and grinding ratio of titanium alloy sample processed by alumina hollow-sphere abrasive belt were analyzed through single-factor experiments, and the reasonable grinding parameter ranges of titanium alloy with hollow-sphere abrasive belt were determined. Then the influence degrees of grinding force, grinding speed, feed speedand grain size on surface roughness and grinding ratio were studied through orthogonal experiments to determine the optimal combination of processing parameters for titanium alloy grinding with hollow-sphere abrasive belt.

Key words: abrasive belt, hollow-sphere, titanium alloy, grinding ratio, surface roughness

中图分类号:

D460.2530

罗戈山;邹莱;黄云;龚明旺. 氧化铝空心球砂带磨削钛合金的材料去除及表面质量研究[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.19.013.

LUO Geshan;ZOU Lai;HUANG Yun;GONG Mingwang. Study on Material Removal and Surface Quality in Titanium Alloy Grinding with Alumina Hollow-sphere Abrasive Belt[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.19.013.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2020.19.013

http://www.cmemo.org.cn/CN/Y2020/V31/I19/2363

参考文献

［1］王鼎春.高强钛合金的发展与应用［J］.中国有色金属学报, 2010, 20(增刊1):958-963.

WANG Dingchun. Development and Application of High Strength Titanium Alloys［J］.Journal of China Nonferrous Metals,2010, 20(S1):958-963.

［2］田永生,陈传忠,王德云,等. 钛合金的激光表面处理研究进展［J］.金属热处理，2005(8):33-38.

TIAN Yongsheng, CHEN Chuanzhong, WANG Deyun, et al. Research Progress of Laser Surface Treatment on Titanium Alloys［J］. Heat Treatment of Metals, 2005(8):33-38.

［3］徐蔡俊. 钛合金高效砂带磨削试验研究［D］. 南京：南京航空航天大学,2008.

XU Caijun. Experimental Study on High Efficiency Abrasive Belt Grinding of Titanium Alloy［D］. Nanjing：Nanjing University of Aeronautics and Astronautics,2008.

［4］XIAO Guijian, HUANG Yun. Constant-load Adaptive Belt Polishing of the Weak-rigidity Blisk Blade［J］. The International Journal of Advanced Manufacturing Technology, 2015, 78(9/12):1473-1484.

［5］XIAO Guijian , HUANG Yun . Experimental Research and Modelling of Life-cycle Material Removal in Belt Finishing for Titanium Alloy［J］. Journal of Manufacturing Processes, 2017, 30:255-267.

［6］KLOCKE F, SOO S L, KARPUSCHEWSKI B, et al. Abrasive Machining of Advanced Aerospace Alloys and Composites［J］. CIRP Annals—Manufacturing Technology, 2015, 64(2):S0007850615001432.

［7］CHAI Hua, HUANG Yun, ZHAO Yun, et al. Experimental Research on the Abrasive Belt Grinding Titanium Alloy Blade of Aviation Engine［J］. Advanced Materials Research, 2012, 565:64-69.

［8］任守良. 钛合金砂带磨削研究［D］. 南京：南京航空航天大学,2007.

REN Shouliang. Research on Titanium Alloy Belt Grinding［D］. Nanjing：Nanjing University of Aeronautics and Astronautics, 2007.

［9］肖贵坚, 黄云, 黄智,等. 基于单因素试验的钛合金砂带磨削砂带寿命研究及分析［J］. 机械设计与制造, 2010(8):175-177.

XIAO Guijian, HUANG Yun, HUANG Zhi, et al. Study and Analysis of the Service Life of Titanium Alloy Abrasive Belt Grinding Based on Single Factor Experiments［J］. Mechanical Design and Manufacture, 2010(8):175-177.

［10］霍文国, 徐九华, 傅玉灿. 近α钛合金砂带磨削的磨粒磨损研究［J］. 山东大学学报 (工学版), 2009, 40(1)：53-58.

HUO Wenguo, XU Jiuhua, FU Yucan. Study on Abrasive Wear of Near-alpha Titanium Alloy Abrasive Belt Grinding［J］. Journal of Shandong University (Engineering Edition), 2009, 40(1)：53-58.

［11］霍文国, 徐九华, 傅玉灿, 等. 超硬磨料砂轮干式磨削Ti6Al4V合金的表面完整性研究［J］. 山东大学学报(工学版), 2012, 42(3):100-104.

HUO Wenguo, XU Jiuhua, FU Yucan, et al. Study on Surface Integrity of Ti6Al4V Alloy by Dry Grinding with Superhard Abrasive Wheel［J］. Journal of Shandong University (Engineering Edition), 2012, 42(3):100-104.

［12］束宏飞, 傅玉灿, 霍文国. 砂带磨抛钛合金表面粗糙度的试验研究［J］. 机械制造与自动化, 2009, 38(4):34-37.

SHU Hongfei, FU Yucan, HUO Wenguo. Experimental Study on Surface Roughness of Abrasive Belt Polishing Titanium Alloy［J］. Mechanical Manufacturing and Automation, 2009, 38(4):34-37.

［13］徐蔡俊, 徐九华, 傅玉灿,等. 钛合金砂带磨削磨粒磨损研究［J］. 航空制造技术, 2008(16):74-76.

XU Caijun, XU Jiuhua, FU Yucan, et al. Study on Abrasive Wear of Titanium Alloy Abrasive Belt Grinding ［J］. Aviation Manufacturing Technology, 2008 (16):74-76.

［14］孙杰, 曲中兴, 张立武. 基于ABAQUS的TC11单颗粒砂带磨削过程仿真［J］. 航天制造技术, 2017(6):21-25.

SUN Jie, QU Zhongxing, ZHANG Liwu. Simulation of TC11 Single Grain Abrasive Belt Grinding Process Based on ABAQUS［J］. Aerospace Manufacturing Technology, 2017 (6):21-25.

［15］王兆武. 堆积磨料的制备与磨削钛合金的研究［D］.郑州:河南工业大学,2016.

WANG Zhaowu. Study on the Preparation of Accumulated Abrasives and Grinding of Titanium Alloys［D］. Zhengzhou:Henan University of Technology, 2016.

［16］宋成杰. 空心球有序排布CBN砂轮研制及高速磨削镍基合金研究［D］. 南京：南京航空航天大学, 2013.

SONG Chengjie, Development of CBN Wheels with Regularly Distributed Bubbles and High Speed Grinding of Nickel Superalloy［D］. Nanjing：Nanjing University of Aeronautics and Astronautics, 2013.

［17］刘明耀,熊华军,夏举学. 陶瓷空心球对金属结合剂金刚石砂轮性能的影响［J］. 金刚石与磨料磨具工程, 2012,32(2):34-38.

LIU Mingyao, XIONG Huajun, XIA Juxue. Effect of Ceramic Hollow Sphere on Properties of Metal Bonded Diamond Wheel［J］. Diamond ＆ Abrasives Engineering, 2012,32(2):34-38.

［18］陈珍珍, 徐九华, 丁文锋,等. 多孔复合结合剂立方氮化硼砂轮磨损特性［J］. 机械工程学报, 2014, 50(17):201-207.

CHEN Zhenzhen, XU Jiuhua, DING Wenfeng, et al. Wear Behavior of Porous Composite-bonded CBN Abrasive Wheels［J］. Journal of Mechanical Engineering, 2014, 50(17):201-207.

［19］黄云, 朱派龙. 砂带磨削原理及其应用［M］. 重庆：重庆大学出版社, 1993:25-27.

HUANG Yun, ZHU Pailong. Principle and Application of Abrasive Belt Grinding［M］. Chongqing：Chongqing University Press, 1993:25-27.

[1]	高嵩, 孙荧力, 李奇涵, 盈亮, 郝兆朋, 张邦成. 钛合金型材多点三维热拉弯成形工艺及其微观组织演化[J]. 中国机械工程, 2023, 34(24): 2986-2995,3014.
[2]	贾志新, 张凯悦, 王津. 聚晶金刚石的混铁粉电火花加工方法研究[J]. 中国机械工程, 2023, 34(22): 2684-2692.
[3]	王明, 董海, 王柏何, 王峥, 王加威. 2.5D Cf/SiC刹车材料浮动磨削工艺试验研究[J]. 中国机械工程, 2023, 34(20): 2434-2441.
[4]	查旭明, 袁智, 秦浩, 袭琳清, 张涛, 姜峰. 钛合金超声冲击强化研究现状及发展趋势[J]. 中国机械工程, 2023, 34(19): 2269-2287.
[5]	高昆, 任延岫, 朱悦, 齐乐华, 罗俊. 飞机钛合金蒙皮战伤便携气动铣切试验研究[J]. 中国机械工程, 2023, 34(19): 2320-2326.
[6]	韩锐, 李秀红, 王嘉明, 李文辉, 程思源, 杨胜强, . 水平强制振动光整加工对TC4钛合金表面完整性参数的影响[J]. 中国机械工程, 2023, 34(17): 2037-2047.
[7]	田龙, 黄传真, 刘盾, 姚鹏, 刘含莲, 刘雪飞. 激光辅助水射流微铣削单晶β-Ga2O3衬底的实验研究[J]. 中国机械工程, 2023, 34(13): 1559-1567.
[8]	傅远韬, 文东辉, 孔凡志, 淦作昆, 成志超, . 线性液动压抛光加工的流场特性研究[J]. 中国机械工程, 2023, 34(11): 1306-1314.
[9]	鲁艳军, 关伟锋, 孙佳劲, 莫睿, 伍晓宇. 基于放电修锐的粗金刚石砂轮干式镜面磨削技术[J]. 中国机械工程, 2023, 34(09): 1052-1060.
[10]	陈庚, 向华, 叶寒, 肖飞. 考虑法向接触力变化的机器人砂带磨削参数研究[J]. 中国机械工程, 2023, 34(07): 803-811，820.
[11]	王栋, 林洪旭, 赵静雯, 乔瑞勇, 张君宇, 赵睿. 高速切向车铣对18CrNiMo7-6钢表面完整性的影响[J]. 中国机械工程, 2023, 34(07): 812-820.
[12]	王海艳, 周秩同, 武晔, 付麒麟. 基于斜角切削理论的钛合金螺旋铣孔切削力建模[J]. 中国机械工程, 2023, 34(02): 142-147.
[13]	季文彬, 邓日清, 戴士杰, 刘春成. 铣削对SLM增材TC4钛合金表面完整性和疲劳性能的影响[J]. 中国机械工程, 2023, 34(02): 208-217,225.
[14]	闫艳燕, 闫浩哲, 刘俊利, 牛赢, 王晓博. TC４钛合金纵扭超声磨削力热耦合模型及其试验研究 [J]. 中国机械工程, 2023, 34(01): 65-74.
[15]	郝宇聪, 赵韡, 杨焘, 郭鹏, . 射流束切削时在边壁约束下的直径增大变形及加工表面质量研究[J]. 中国机械工程, 2022, 33(17): 2029-2037.