镍铝青铜合金仿生表面的砂带磨削及其降噪特性

doi:10.3969/j.issn.1004-132X.2020.20.013

摘要/Abstract

摘要： 针对镍铝青铜合金材料难以加工出仿生沟槽表面从而提高其降噪性能的问题，利用金字塔砂带和空心球砂带在镍铝青铜合金材料表面上磨削出仿生沟槽，并搭建配套试验平台来对镍铝青铜合金材料表面进行仿生沟槽结构的磨削加工。提取了磨削表面的特征，据此进行流体噪声计算，对比分析了金字塔砂带磨削出的仿生表面和空心球砂带磨削出的仿生沟槽表面的噪声性能，结果显示：金字塔砂带磨削出的规则仿生沟槽表面声学能量等级的平均值为18.07 dB，空心球砂带磨削出的不规则仿生沟槽表面声学能量等级的平均值为37.6 dB。试验中，两种砂带磨削加工后的镍铝青铜合金表面均具有仿生沟槽结构，且金字塔砂带磨削出的规则仿生沟槽表面具有更好的水下降噪性能。

关键词: 镍铝青铜合金, 砂带磨削, 仿生表面, 降噪

Abstract: In view of the difficulty in machining bionic groove surfaces of nickel-aluminum bronze alloy to improve its noise reduction performance, the bionic grooves were grinded on the surfaces of nickel-aluminum bronze alloy by pyramid belt and hollow spherical belt, and a test platform was set up to grind the surfaces of nickel-aluminum bronze alloy with bionic groove structure. The characteristics of grinding surfaces were extracted and the finite element fluid noise analysis was carried out accordingly. The noise performance of pyramid abrasive belt grinding bionic surface and hollow ball abrasive belt grinding bionic groove surface was compared and analyzed. The results show that the average acoustic energy level of regular bionic groove surface grinded by pyramid abrasive belt is as 18.07 dB, and that of irregular bionic groove surface grinded by hollow ball abrasive belt is as 37.6 dB. In the experiments, the surfaces of nickel-aluminum bronze alloy grinded by two kinds of abrasive belt have bionic groove structure, and the regular bionic groove surfaces grinded by pyramid abrasive belt have better underwater noise reduction performance.

Key words: nickel-aluminum bronze alloy, belt grinding, bionic surface, denoise

中图分类号:

TP182

黄云;甲花索朗;肖贵坚. 镍铝青铜合金仿生表面的砂带磨削及其降噪特性[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.20.013.

HUANG Yun;JIAHUA Suolang;XIAO Guijian. Bionic Surface Abrasive Belt Grinding of Nickel-aluminum Bronze Alloy and Its Noise Reduction Characteristics[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.20.013.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2020.20.013

http://www.cmemo.org.cn/CN/Y2020/V31/I20/2497

参考文献

［1］宋德军,胡光远,卢海,等.镍铝青铜合金的应用与研究现状［J］.材料导报,2007, 21(增刊3)：450-452.
SONG Deijun, HU Guangyuan, LU Hai, et al. Application and Research Status of Ni-Al Bronze Alloy ［J］. Materials Review, 2007, 21(S3)：450-452.
［2］KUO H C, DZAN W Y. The Analysis of NC Machining Efficiency for Marine Propellers［J］. Journal of Materials Processing Technlogy,2002,124(3)：389-395.
［3］曹利新,杨延峰,刘健.圆柱形刀具侧铣船用螺旋桨原理与方法［J］.大连理工大学学报,2006,46(1)：45-49.
CAO Lixin, YANG Yanfeng, LIU Jian. Principle and Method of Side Milling Marine Propeller with Cylindrical Cutter［J］. Journal of Dalian University of Technology, 2006,46(1)：45-49.
［4］杨春强,黄云,吴建强.船用螺旋桨砂带磨削表面质量的试验研究［J］.中国机械工程,2011,22(14):1659-1663.
YANG Chunqiang, HUANG Yun, WU Jianqiang. Experimental Study on Grinding Surface Quality of Marine Propeller Abrasive Belt［J］. China Mechanical Engineering, 2011,22(14):1659-1663.
［5］CARRELLA A, BRENNAN M J, WATERS T P. Optimization of a Quasi-zero-stiffness Isolator［J］. Journal of Mechanical Science and Technology, 2007, 21(6)：946-949.
［6］任露泉，杨卓娟，韩志武. 生物非光滑耐磨表面仿生应用研究展望［J］.农业机械学报，2005，36（7）：144-147
REN Luquan, YANG Zhuojuan, HAN Zhiwu. Prospect of Bionic Application of Biological Non-smooth Wear Resistant Surface［J］. Transactions of the Chinese Society of Agricultural Machinery, 2005,36（7）：144-147.
［7］BTTNER C C, SCHULZ U. Shark Skin Inspired Riblet Structures as Aerodynamically Optimized High Temperature Coatings for Blades of Aeroengines［J］. Smart Materials and Structures,2011,20(9)：094016.
［8］WALSH M J. Riblets as a Viscous Drag Reduction Technique［J］.AIAA Journal,1983,21(4)：485-486.
［9］DENKENA B, KHLER J, WANG Bo. Manufacturing of Functional Riblet Structures by Profile Grinding［J］. CIRP Journal of Manufacturing Science and Technology, 2010,3(1)：14-26.
［10］BECHERT D W, BARTENWERFER M. The Viscous Flow on Surfaces with Longitudinal Ribs［J］. Journal of Fluid Mechanics,1989,206(1)：105-129.
［11］MASCHA E. ber Die Schwungfedern［J］. Zeitschrift für Wissenschaftliche Zoologie, 1904, 77：606-651.
［12］GRAHAM R R. The Silent Flight of Owls［J］. Journal of Royal Aeronautical Society, 1934, 38(286)：837-843.
［13］BACHMANN T, WAGNER H. The Three-dimensional Shape of Serrations at Barn Owl Wings:towards a Typical Natural Serration as a Role Model for Biomimetic Applications［J］.Journal of Anatomy, 2011,219(2)：192-202.
［14］GRUSCHKA H D, BORCHERS I U, COBLE J G. Aerodynamic Noise Produced by a Gliding Owl［J］.Nature,1971,233(5319)：409-411.
［15］FISH F E. Transitions from Drag-based to Lift-based Propulsion in Mammalian Swimming［J］.American Zoologist,1996,36(6)：628-641.
［16］FISH F E, BATTLE J M. Hydrodynamic Design of the Humpback Whale Flipper［J］.Journal of Morphology,1995,225(1)：51-60.
［17］MIKLOSOVIC D S, MURRAY M M, HOWLE L E, et al. Leading-edge Tubercles Delay Stall on Humpback Whale (Megaptera Novaeangliae) Flippers［J］. Physics of Fluids,2004,16(5)：39-42.
［18］LI Dian,YANG Luona, LIU Xiaomin. A Comparative Study on Aerodynamic Performance and Noise Characteristics of Two Kinds of Long-eared Owl Wing Models［J］.Journal of Mechanical Science and Technology,2017,31(8)：3821-3830.
［19］黄云,肖贵坚,邹莱.整体叶盘抛光技术的研究现状及发展趋势［J］. 航空学报, 2016, 37(7)：2045-2064.
HUANG Yun, XIAO Guijian, ZOU Lai. Research Progress of Drag Reduction Biomimetic Research Status and Development Trend of Integral Blade Polishing Technology［J］. Acta Aeronautica et Astronautica Sinica, 2016, 37(7)：2045-2064.
［20］VOLKOV D I, KORYAZHKIN A A. Adaptive Belt Grinding of Gas Turbine Blades［J］.Russian Engineering Research, 2014, 34(1)：37-40.
［21］AXINTE D A, KRITMANOROT M, AXINTE M, et al. Investigations on Belt Polishing of Heat-resistant Titanium Alloys［J］. Journal of Materials Processing Technology, 2005, 166(3)：398-404.
［22］HE Yi, XIAO Guijian, LI Wei, et al.Residual Stress of TC17 Titanium Alloy after Belt Grinding and Its Impact on the Fatigue Life［J］. Materials, 2018,11(11)：221801-221816.
［23］SONG Yixu, LIANG Wei, YANG Yang. A Method for Grinding Removal Control of a Robot Belt Grinding System［J］. Journal of Intelligent Manufacturing, 2012, 23(5)：1903-1913.
［24］刘博,姜鹏,李旭朝,等.鲨鱼盾鳞肋条结构的减阻仿生研究进展［J］.材料导报,2008,22(7)：14-17.
LIU Bo, JIANG Peng, LI Xuzhao, et al. Research Progress of Drag Reduction Biomimetic Research on Scale Rib Structure of Shark Shield［J］. Materials Review, 2008,22(7)：14-17.
［25］BTTNER C C, SCHULZ U. Shark Skin Inspired Riblet Structures as Aerodynamically Optimized High Temperature Coatings for Blades of Aeroengines［J］.Smart Materials and Structures, 2011,20(9)：094016.
［26］AFROZ F, LANG A, HABEGGER M L, et al. Experimental Study of Laminar and Turbulent Boundary Layer Separation Control of Shark Skin［J］. Bioinspiration and Biomimetics,2016,12(1)：016009.
［27］BIXLER G D, BHUSHAN B.Fluid Drag Reduction with Shark-skin Riblet Inspired Microstructured Surfaces［J］.Advanced Functional Materials,2013, 23(36):4507-4528.
［28］XIAO Guijian, HE Yi, HUANG Yun,et al. Shark-skin-inspired Micro-riblets Forming Mechanism of TC17 Titanium Alloy with Belt Grinding［J］.IEEE Access,2019, 7(1):107636-107648.
［29］XIAO Guijian, HUANG Yun. Micro-stiffener Surface Characteristics with Belt Polishing Processing for Titanium Alloys［J］. International Journal of Advanced Manufacturing Technology, 2019,100(1/4)：349-359.
［30］黄云，黄智.现代砂带磨削技术及工程应用［M］.重庆:重庆大学出版社,2009:82-87.
HUANG Yun, HUANG Zhi. Modern Abrasive Belt Grinding Technology and Its Engineering Application［M］.Chongqing:Chongqing University Press, 2009:82-87.
［31］白海涛,赖焕新.基于三种亚格子模型的空腔振荡流动计算［J］.华东理工大学学报（自然科学版）,2016,42(1):125-131.
BAI Haitao, LAI Huanxin.Calculation of Oscillation Flow in Open Cavity Using Three Sub-grid Scale Models［J］. Journal of East China University of Science and Technology(Natural Science Edition),2016,42(1):125-131.
［32］姜昕亚. 沿螺旋桨桨叶流体运动方向切削加工的刀具路径规划［D］.武汉:华中科技大学,2015.
JIANG Xinya. Tool Path Planning of Moving along the Fluid Flow Direction on Propeller Blade Surface in Machining Process ［D］. Wuhan：Huazhong University of Science and Technology,2015.
［33］石秀华,宋保维.条纹薄膜降低水下航行器流噪声的实验研究［J］.西北工业大学学报,1997,15(3):395-398.
SHI Xiuhua, SONG Baowei. Experimental Research on Stripe Film for Reducing Flow Noise of Underwater Vehicle［J］.Journal of Northwestern Polytechnical University, 1997, 15(3):395-398.

[1]	梁淑宝, 张培林, 曹建军, 任国全. 基于蚁群优化的提升小波包渐变式阈值降噪方法 [J]. J4, 201016, 21(16): 1964-1969.
[2]	陈庚, 向华, 叶寒, 肖飞. 考虑法向接触力变化的机器人砂带磨削参数研究[J]. 中国机械工程, 2023, 34(07): 803-811，820.
[3]	刘会永, 张松, 李剑峰, 栾晓娜, . 采用改进CNN-BiLSTM模型的刀具磨损状态监测[J]. 中国机械工程, 2022, 33(16): 1940-1947，1956.
[4]	赵志宏, 李乐豪, 杨绍普, 李晴. 一种频域特征提取自编码器及其在故障诊断中的应用研究[J]. 中国机械工程, 2021, 32(20): 2468-2474.
[5]	杨赫然, 何源, 孙兴伟, 董祉序, 乔赫廷. 螺杆转子砂带磨削装置开发及材料去除率预测[J]. 中国机械工程, 2021, 32(17): 2055-2062.
[6]	张朝阳1,2;吉卫喜1,2. 数据驱动的机床等待过程节能方法研究[J]. 中国机械工程, 2020, 31(12): 1492-1499.
[7]	段练1,2;黄云1,2;邹莱1,2. 机器人砂带磨削GH4169镍基高温合金表面完整性研究[J]. 中国机械工程, 2019, 30(17): 2044-2050.
[8]	王丽华1;杨家巍1;张永宏1;赵晓平2;谢阳阳1. 基于堆叠降噪自编码的刀具磨损状态识别[J]. 中国机械工程, 2018, 29(17): 2038-2045.
[9]	吴雅朋;王吉芳;徐小力;蒋章雷. 基于小波分析的FastICA联合降噪方法在滚动轴承故障诊断中的应用研究[J]. 中国机械工程, 2017, 28(18): 2183-2188,2197.
[10]	白利娟, 张建华, 陶国灿, 沈学会 , 王金军, . 振动辅助铣削加工仿生表面研究[J]. 中国机械工程, 2016, 27(09): 1229-1233,1242.
[11]	卞家磊, 朱春梅, 蒋章雷, 吕俊燕. LMD-ICA联合降噪方法在滚动轴承故障诊断中的应用[J]. 中国机械工程, 2016, 27(07): 904-910.
[12]	杨宇, 李紫珠, 何知义, 程军圣. 基于ASTFA降噪和AKVPMCD的滚动轴承故障诊断方法[J]. 中国机械工程, 2015, 26(21): 2934-2940.
[13]	路勇, 黄云, 尹咸, 陈育辉, . Cu-3镍铜合金砂带磨削试验研究[J]. 中国机械工程, 2015, 26(2): 167-170,177.
[14]	孙虎儿, 王志武. 级联分段线性随机共振的微弱信号检测[J]. 中国机械工程, 2014, 25(24): 3343-3347.
[15]	王尚斌, 孙宇, 张新洲. 高速压力机动态精度测量方法研究[J]. 中国机械工程, 2014, 25(17): 2391-2395.