[成形过程仿真优化与集成计算材料工程]塑性加工摩擦定律的研究进展

doi:10.3969/j.issn.1004-132X.2020.22.007

摘要/Abstract

摘要： 塑性加工一般采用润滑油或固体润滑膜对工件进行润滑处理，干摩擦定律作为理解润滑条件下的摩擦行为的基础，可通过类金刚石镀膜镀层模具与板材进行侧拉摩擦试验和高面压摩擦试验来确定。对固体润滑膜下的摩擦定律进行了研究，最后基于干摩擦定律与侧拉摩擦试验，提出了油润滑条件下的摩擦定律。

关键词: 塑性加工, 摩擦定律, 干摩擦, 润滑

Abstract: In metal forming, liquid lubricants and lubrication coatings were generally employed. Based on the understanding of friction behaviors under lubricated conditions, the friction law under dry conditions was determined by experimental results in the side stretching friction tests and the high pressure friction tests with a diamond-like carbon(DLC) coated friction tool. Then the friction law of lubrication coatings was investigated. Finally, the friction law under lubricated conditions was proposed based on the friction law under dry conditions and experimental results obtained by the side stretching friction tests.

Key words: metal forming, friction law, dry friction, lubricant

中图分类号:

TG164.2

王志刚, 吉川泰晴, 董文正, . [成形过程仿真优化与集成计算材料工程]塑性加工摩擦定律的研究进展[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.22.007.

WANG Zhigang, YOSHIKAWA Yasuharu, DONG Wenzheng, . State-of-the-art of Friction Law in Metal Forming[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.22.007.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2020.22.007

http://www.cmemo.org.cn/CN/Y2020/V31/I22/2708

参考文献

［1］BAY N, AZUSHIMA A, GROCHE P, et al. Environmentally Benign Tribo-systems for Metal Forming［J］. CIRP Annals, 2010, 59(2):760-780.
［2］KADA O, WANG Z G, MIYANISHI K, et al. Evaluation of Anti-galling Ability of Zinc Phosphate Coating by Backward Extrusion of Cylindrical Cup［J］. Journal of Materials Processing Technology, 2020, 285：116765.
［3］BAY N, WANHEIM T. Real Area of Contact and Friction Stress at High Pressure Sliding Contact［J］. Wear, 1976, 38:201-209.
［4］NIELSEN C V, BAY N. Review of Friction Modeling in Metal Forming Processes［J］. Journal of Materials Processing Technology, 2018, 255:234-241.
［5］MERKLEIN M, ALLWOOD J M, BEHRENS B A, et al. Bulk Forming of Sheet Metal［J］. CIRP Annals, 2012, 61(2)：725-745.
［6］WANG Z G, HIRASAWA K, YOSHIKAWA Y, et al. Forming of Light-weight Gear Wheel by Plate Forging［J］. CIRP Annals, 2016, 65(1)：293-296.
［7］WANG Z G, HAKOYAMA T, ENDO Y, et al. Application of Flow Model in Metal Cutting to Cold Forging of Tubular Products［J］. CIRP Annals, 2019, 68(1)：273-276.
［8］WANG Z G, YOSHIKAWA Y, OASKADA Y, et al. A New Forming Method of Solid Bosses on a Cup Made by Deep Drawing［J］. CIRP Annals, 2013, 62(1)：291-294.
［9］WANG Z G, YOSHIKAWA Y. A New Forming Method of Triple Cup by Plate Forging［J］. Procedia Engineering, 2014, 81：389-394.
［10］TAMAOKI K. Development and Practical Use of Dry Deep Drawing［J］. Journal of JSTP, 2008, 49(575)：1166-1167.
［11］WANG Z G. Tribological Approaches for Green Metal Forming［J］. Journal of Materials Processing Technology, 2004, 151(1/3):223-227.
［12］WANG Z G, YOSHIKAWA Y, SUZUKI T, et al. Determination of Friction Law in Dry Metal Forming with DLC Coated Tool［J］. CIRP Annals, 2014, 63(1)：277-280.
［13］NAKAMURA T. A Study of the Lubrication Behavior of Solid Lubricants in the Upsetting Process［J］. Journal of Tribology, 2000, 122(4)：803-808.
［14］WANG Z G, SUZUKI T. Friction Law in Dry Metal Forming of Materials with Work Hardening［J］. Procedia Manufacturing, 2018, 15：475-480.
［15］WANG Z G, KOMIYAMA S. New Cold Forging Lubricant Replacing Zinc Phosphate Coating［M］∥TEKKAYA A E. 60 Excellent Inventions in Metal Forming. Berlin:Springer, 2015：343-348.
［16］WANG Z G, KOMIYAMA S, YOSHIKAWA Y, et al. Evaluation of Lubricants without Zinc Phosphate Precoat in Multi-stage Cold Forging［J］. CIRP Annals, 2015, 64(1)：285-288.
［17］KADA O, WANG Z G. Lubricating Performance of Residual Zinc Phosphate Coating on Forged Specimen in Bowden-Leben Sliding Test［J］. Key Engineering Materials, 2018, 767:124-130.
［18］KASUGA Y. Boundary Lubrication under High Normal Pressures［J］. Journal of JSLE, 1970, 16:748-758.
［19］AZUSHIMA A. Direct Observation of Contact Behaviour to Interpret the Pressure Dependence of the Coefficient of Friction in Sheet Metal Forming ［J］. CIRP Annals, 1995, 44(1)：209-212.
［20］WANG Z G, DONG W Z, OSAKADA K. Determination of Friction Law in Metal Forming under Oil-lubricated Condition［J］. CIRP Annals, 2018, 67(1)：257-260.
［21］ZHANG Y, WANG Z G, YOSHIKAWA Y, et al. Experimental Investigation on Friction Law under Starved Lubrication in Metal Forming［J］. Procedia Engineering, 2017, 207：2269-2273.
［22］WANG Z G, KOZAKAI Y. Effect of Friction History of Workpiece on Friction Behaviour in Metal Forming［J］. IOP Conference Series：Materials Science and Engineering， 2019, 544(1)：012024.

[1]	马巧英, 杨绍普, 刘永强, . 轮轨激扰下轨道车辆轴箱轴承振动与润滑特性分析[J]. 中国机械工程, 2024, 35(04): 580-590.
[2]	张宇, 王德祥, 郭峰, 栗心明, . 球形纳米颗粒在镍基合金纳米流体微量润滑磨削界面摩擦学机制的分子动力学研究[J]. 中国机械工程, 2024, 35(03): 445-456.
[3]	付振峰, 王振忠, 王彪. 微流控芯片流体动压抛光工艺研究[J]. 中国机械工程, 2024, 35(03): 534-540.
[4]	张立峰, 张晓光. 微量润滑变角度高速铣削碳纤维增强复合材料的加工性能与材料去除机理[J]. 中国机械工程, 2023, 34(21): 2622-2628.
[5]	魏冰阳, 古德万, 王永强, 杨建军, . 高减比准双曲面齿轮摩擦功耗分析与效率试验[J]. 中国机械工程, 2023, 34(13): 1525-1532.
[6]	潘伶, 林国斌, 韩雨晴, 余辉. 分子动力学模拟纳米颗粒添加剂对边界润滑的影响[J]. 中国机械工程, 2023, 34(10): 1140-1156.
[7]	叶绍干, 赖伟群, 侯亮, 卜祥建. 锥形缸体球面配流副润滑特性建模及试验验证[J]. 中国机械工程, 2022, 33(20): 2420-2428，2436.
[8]	薛恩驰, 郭智威, 袁成清, . 具备温度感知的船用智能水润滑尾轴承设计及性能验证[J]. 中国机械工程, 2022, 33(14): 1639-1645.
[9]	廖毅弘, 张桂明, 许静. 织构化可控界面对汽轮机调节阀泄漏影响规律及机制[J]. 中国机械工程, 2022, 33(12): 1427-1434.
[10]	梁兴鑫, 张森, 齐世煌, 靳栓宝. 轮缘推进器水润滑聚晶金刚石推力轴承承载性能试验研究[J]. 中国机械工程, 2022, 33(12): 1452-1458，1467.
[11]	韩翠红, 马国政, 李国禄, 石佳东, 王海斗, . Mo/MoS2-Pb-PbS复合薄膜的真空摩擦学行为研究[J]. 中国机械工程, 2022, 33(12): 1477-1483.
[12]	余国达, 刘怀举, 卢泽华, 魏沛堂. 脂润滑条件下塑料齿轮稳态温度场仿真与试验研究[J]. 中国机械工程, 2022, 33(08): 890-898，907.
[13]	杨简彰, 王成勇, 袁尧辉, 袁松梅, 王西彬, 梁赐乐, 李伟秋. 微量润滑复合增效技术及其应用研究进展[J]. 中国机械工程, 2022, 33(05): 506-528.
[14]	刘明政, 李长河, 曹华军, 张松, 陈云, 刘波, 张乃庆, 周宗明. 低温微量润滑加工技术研究进展与应用[J]. 中国机械工程, 2022, 33(05): 529-550.
[15]	王德祥, 赵齐亮, 张宇, 高腾, 江京亮, 刘国梁, 李长河, . 离子液体在微量润滑磨削界面的摩擦学机理研究[J]. 中国机械工程, 2022, 33(05): 560-568，606.