金刚石型面约束的自由磨粒挤磨修整超硬磨料砂轮方法

doi:10.3969/j.issn.1004-132X.2020.24.009

摘要/Abstract

摘要： 针对超硬磨料砂轮存在修整困难的问题，基于金刚石和普通材料在强度上存在巨大差异的特点，提出了一种在金刚石型面约束下将磨粒挤压和修磨相结合的修整方法，其基本原理是：表面有精密形状的金刚石工具通过高速旋转生成具有约束能力的高强度型面，型面通过约束自由磨粒对被修砂轮产生挤压划擦作用破坏砂轮结合剂完成砂轮高效修形,同时通过修整工具高强度金刚石磨料的微研削作用对被修砂轮型面进行进一步精密修磨。对约束型面的形成及自由磨粒在型面约束下挤压和研削作用机制进行了分析，并介绍了挤磨修整系统的构成和特性，对修整力、修磨速度和自由磨粒等参数影响规律进行了初步试验探索，结果表明，自由磨粒型面约束下的挤压能够实现超硬磨料砂轮的快速成形精密修整。

关键词: 超硬磨料砂轮, 砂轮修整, 挤磨修整, 金刚石约束型面, 自由磨粒

Abstract: In view of the difficulty of dressing super-abrasive grinding wheels, a dressing method was proposed, which was a combination of the grain extrusion and grinding under the constraints of diamond profiles. This method was based on the characteristics of the great differences in strength between diamond and ordinary materials and the principles were as follows. Diamond tools with precision shapes on the surfaces produced high-strength surfaces with constraints through high-speed rotation. Free grains under the constraints of diamond constraint profiles had a squeeze-scratching effect on the grinding wheels and destroyed the adhesive of the grinding wheels to complete the dressing of grinding wheels in high efficiency. Meanwhile, the shape of the grinding wheels was further refined by the micro-grinding effect of the high-strength diamond abrasives of the dressing tools. Herein, the formation of the constraint profiles and the mechanism of extrusion and cutting of the free grinding grains under the diamond constraint profile were analyzed. The composition and characteristics of the extruded dressing systems were introduced. The influence laws of parameters such as dressing force, grinding speed and free grinding grain were explored experimentally. The results show that precision dressing of ultra-hard abrasive grinding wheels in high efficiency may be achieved by extrusion of free grains under the constraints of diamond profiles.

Key words: super-abrasive grinding wheel, grinding wheel dressing, extruding grinding dressing, diamond constraint profile, free abrasive grain

中图分类号:

TH161

崔仲鸣；王星；赫青山；周宝仓. 金刚石型面约束的自由磨粒挤磨修整超硬磨料砂轮方法[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.24.009.

CUI Zhongming;WANG Xing;HE Qingshan;ZHOU Baocang. A Method for Extruding Grinding Dressing Super-abrasive Grinding Wheels Using Free Grains under Constraint of Diamond Abrasive Surface[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.24.009.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2020.24.009

http://www.cmemo.org.cn/CN/Y2020/V31/I24/2959

参考文献

［1］丁文锋, 苗情, 李本凯, 等.面向航空发动机的镍基合金磨削技术研究进展［J］. 机械工程学报, 2019, 55(1)：189-215.
DING Wenfeng, MIAO Qing, LI Benkai, et al. Review on Grinding Technology of Nickel-based Superalloys Used for Aero-engine［J］. Journal of Mechanical Engineering,2019, 55(1)：189-215.
［2］GORKA V , NAIARA O, HECTOR B, et al. An Analysis of Electroplated CBN Grinding Wheel Wear and Conditioning during Creep Feed Grinding of Aeronautical Alloys ［J］. Metals，2018, 8(5)： 350.
［3］崔仲鸣, 赫青山, 冯创举, 等.超硬磨料磨具修整技术研究［J］. 金刚石与磨料磨具工程, 2016, 36(1):43-48.
CUI Zhongming, HE Qingshan, FENG Chuangju, et al. Study on Dressing Technology of Super Abrasive Products［J］. Diamond & Abrasive Engineering, 2016, 36(1):43-48.
［4］李长河, 修世超, 蔡光起. 超硬磨料砂轮修锐技术最新进展［J］. 工具技术, 2005, 39(3)：7-9.
LI Changhe, XIU Shichao, CAI Guangqi. Development of Truing/Dressing Technology on Superabrasive Grinding Wheel［J］. Tool Engineering, 2005, 39(3)：7-9.
［5］张丙鹏，赵文祥，王西彬. GC杯型砂轮粒度与金刚石砂轮修整效率间的关系建模［J］. 工具技术, 2006(4)：32-34.
ZHANG Bingpeng, ZHAO Wenxiang, WANG Xibin. Relationship Modeling between Granularity of GC Cup Wheel and Dressing Efficiency of Diamond Grinding Wheel［J］. Tool Engineering, 2006(4)：32-34.
［6］DENNIS P, KAISER M.用可修整的金刚石和立方氮化硼砂轮进行成形磨削［J］.机械工艺师, 2001 (7)：69-71.
DENNIS P, KAISER M. Forming Grinding with Trimmable Diamond and Cubic Boron Nitride Grinding Wheels［J］. Mechanical Engineer, 2001 (7)：69-71.
［7］ZYLKAL, BABIARZ R. Dressing Process in the Grinding of Aerospace Blade Root［J］.Journal of Mechanical Science and Technology, 2017, 31(9)：4411-4417.
［8］余剑武, 何利华, 黄帅,等. 电火花修整超硬磨料砂轮技术发展现状［J］.中国机械工程, 2015,26(16):2254-2261.
YU Jianwu, HE Lihua, HUANG Shuai, et al. State-of-the-art of Electrical Discharge Dressing Technology for Superabrasive Grinding Wheel［J］. China Mechanical Engineering,2015,26(16):2254-2261.
［9］DENG Hui, DENG Zhaohui, LI Shichun. The Grinding Performance of a Laser-dressed Bronze-bonded Diamond Grinding［J］. International Journal of Advanced Manufacturing Technology, 2017, 88(5/8):1789-1798.
［10］CHRISTIAN W, MOHAMMAD R, MAXIMILIAN W, et al. Dressing and Truing of Hybrid Bonded CBN Grinding Tools Using Short-pulsed Fibre Laser［J］. CIRP Annals—Manufacturing Technoloyg, 2012, 61(1)：279-282.
［11］冯克明, 赵金坠, 邢波. 超硬磨料砂轮修整技术综述与展望［J］. 兵器材料科学与工程, 2019,42(2):115-121.
FENG Keming, ZHAO Jinzhui, XING Bo. Review and Prospect of Dressing Technology of Superhard Abrasive Grinding Wheel［J］. Ordnance Material Science and Engineering, 2019,42(2):115-121.
［12］DENG H, XU Z. Dressing Methods of Superabrasive Grinding Wheels：a Review［J］. Journal of Manufacturing Processes, 2019, 45：46-69.
［13］康仁科, 原京庭, 史兴宽,等. 超硬磨料砂轮的激光修锐技术研究［J］. 中国机械工程, 2000, 11(5)：493-496.
KANG Renke, YUAN Jingting, SHI Xingkuan， et al. Research on Laser Sharpening Technology of Ultra-hard Abrasive Grinding Wheel［J］. China Mechanical Engineering, 2000, 11(5)：493-496.

[1]	李颂华1,2;韩涛1;王维东1;孙健1;韩光田1. 垂直式超硬砂轮圆弧修整器设计与砂轮修整[J]. 中国机械工程, 2020, 31(05): 513-518,526.
[2]	余剑武, 何利华, 黄帅, 尚振涛, 吴耀, 段文. 电火花修整超硬磨料砂轮技术发展现状[J]. 中国机械工程, 2015, 26(16): 2254-2262.
[3]	张贝, 傅玉灿, 苏宏华. 单层钎焊金刚石砂轮的修整实验研究[J]. 中国机械工程, 2014, 25(13): 1778-1783.
[4]	王振忠1, 郭隐彪1, 李洁2, 雷向阳2, 张东旭1. 大口径光学元件高精度平面磨床加工系统研究 [J]. 中国机械工程, 2012, 23(1): 78-84.