体外磁控内置式尿道阀仿真与实验研究

doi:10.3969/j.issn.1004-132X.2021.02.005

摘要/Abstract

摘要： 为克服人工尿道括约肌长时间压闭尿道引起组织坏死等问题，设计了一种体外磁控内置式尿道阀。建立了流量-压差特性及磁驱动力数学模型，应用有限元法计算分析了流场分布、液阻和磁驱动力的影响因素。搭建了下尿路模拟实验平台，研究了尿流率-膀胱压特性、磁驱动力特性。结果表明：增大阀口开度和阀芯半锥角均能增加尿流率；增大外磁体厚度、减小气隙均能增大磁驱动力；最大尿流率可达28.7 mL/s，符合人体尿动力学规律。

关键词: 尿道阀, 有限元法, 磁驱动力, 最大尿流率

Abstract: In order to overcome the problems of tissue necrosis caused by continuous compression on urethra of artificial urethral sphincter, an internal urethral valve that controlled by external magnet was designed. Flow-pressure characteristic mathematical model and magnetic driving force calculation model were established. Finite element method was used to analyze flow field distribution, influence factors of liquid resistance and magnetic driving force. Simulation experimental system of lower urinary tract was established to study the urine flow rate-intravesical pressure characteristics and magnetic driving force characteristics. The results show that the flow rate increases with the increasing of opening of valve port and semi-cone angle of valve core, magnetic driving force increases with the increasing of outer magnet thickness and the reducing of air gap. The maximum urinary flow rate may reach 28.7 mL/s, in line with the law of human urodynamics.

Key words: urethral valve, finite element method, magnetic driving force, maximum urinary flow rate

中图分类号:

TH137
R318.6

付青云1;李笑1;李树1;彭伟鸿1;关婷2. 体外磁控内置式尿道阀仿真与实验研究[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2021.02.005.

FU Qingyun1;LI Xiao1;LI Shu1;PENG Weihong1;GUAN Ting2.

Simulation and Experimental Study of Internal Urethral Valves with External Magnetic-controlled

[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2021.02.005.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2021.02.005

http://www.cmemo.org.cn/CN/Y2021/V32/I02/156

参考文献

［1］PALMEROLA R, FIROOZI F. Male Stress Urinary Incontinence［M］. Berlin: Springer International Publishing， 2017.

［2］CHUNG E, RANAWEERA M, CARTMILL R. Newer and Novel Artificial Urinary Sphincters(AUS):the Development of Alternatives to the Current AUS Device［J］. BJU International, 2012, 110: 5-11.

［3］LAMRAOUI H, BONVILAIN A, ROBAIN G, et al. Development of a Novel Artificial Urinary Sphincter: a Versatile Automated Device［J］. IEEE/ASME Transactions on Mechatronics, 2010, 15(6):916-924.

［4］胡振，李笑，关婷. 超声汽化蒸汽驱动的尿道阀的仿真与实验［J］. 中国机械工程，2015，26(13)：1789-1793.

HU Zhen, LI Xiao, GUAN Ting. Simulation and Experiments for Urethral Valve Driven by Ultrasonic-vaporized Steam［J］. China Mechanical Engineering, 2015, 26(13):1789-1793.

［5］张燃，李笑，曹睿，等. 无线供电形状记忆合金驱动的尿道阀驱动特性研究［J］. 中国机械工程，2017，28(19)：2282-2288.

ZHANG Ran, LI Xiao, CAO Rui, et al. Research on Driving Performances of Urethra Valve Driven by SMA Based on Wireless Power Supply［J］. China Mechanical Engineering, 2017, 28(19):2282-2288.

［6］MAZZOCCHI T, RICOTTI L, PINZI N, et al. Magnetically Controlled Endourethral Artificial Urinary Sphincter［J］. Annals of Biomedical Engineering, 2017, 45(5):1181-1193.

［7］冀宏，傅新，杨华勇. 几种典型液压阀口过流面积分析及计算［J］. 机床与液压，2003(5)：14-16.

JI Hong, FU Xin, YANG Huayong. Analysis and Calculation on Typical Shape Orifice Areas in Hydraulic Valves［J］. Machine Tool & Hydraulic, 2003(5):14-16.

［8］张文升，王利军，任志贵，等. 基于有限元方法的单向阀内部流场分析［J］. 陕西理工大学学报（自然科学版），2019,35（2）：28-33.

ZHANG Wensheng, WANG Lijun, REN Zhigui, et al. Internal Flow Field Analysis of One-way Valve Based on Finite Element Method［J］. Journal of Shaanxi University of Technology (Natural Science Edition), 2019, 35（2）: 28-33.

［9］李景天，宋一得，郑勤红，等. 用等效磁荷法计算永磁体磁场［J］. 云南师范大学学报（自然科学版），1999(2)： 36-39.

LI Jingtian, SONG Yide, ZHEN Qinhong, et al. Computation of the Magnetic Field of Permanent Magnet with Equivalent Magnetic Charge Method［J］. Journal of Yunnan Normal University(Natural Sciences Edition), 1999(2):36-39.

［10］历建刚. 永磁体间的磁力和磁力矩研究［D］. 长春：吉林大学，2015.

LI Jiangang. Research on the Force and Torque between Permanent Magnets［D］. Changchun: Jilin University, 2015.

［11］周劲松. 膀胱出口梗阻生物力学研究［D］. 天津：天津科技大学，2018.

ZHOU Jinsong. Biomechanical Research of the Bladder Outflow Obstruction［D］. Tianjin: Tianjin University of Science and Technology, 2018.

［12］任志安，郝点，谢红杰. 几种湍流模型及其在FLUENT中的应用［J］. 化工装备技术，2009，30(2)：38-40.

REN Zhian, HAO Dian, XIE Hongjie. Several Turbulence Models and Their Application in FLUENT［J］. Chemical Equipment Technology, 2009,30(2):38-40.

［13］金锡御，宋波. 临床尿动力学［M］. 北京：人民卫生出版社， 2002.

JIN Xiyu, SONG Bo. Clinical Urodynamics［M］. Beijing: Peoples Health Press, 2002.

［14］MOORE K L, DALLEY A F, AGUR A M. Clinically Oriented Anatomy［M］.Philadelphia:Lippincott Williams & Wilkins, 2013.

[1]	胡超, 刘佐民. 基于材料匹配性的球轴承Heathcote黏-滑模型研究 [J]. J4, 201016, 21(16): 1969-1973.
[2]	孟宗, 李佳松, 潘作舟, 庞修身, 崔玲丽, 樊凤杰. 裂纹故障对轮齿时变啮合刚度的影响分析[J]. 中国机械工程, 2022, 33(16): 1897-1905，1911.
[3]	王龙凯, 王艾伦, 尹伊君, 金淼, 衡星. 航空涡轮轴发动机复杂转子的动力学建模方法[J]. 中国机械工程, 2022, 33(13): 1513-1520.
[4]	李元泰, 吴华鑫, 董斌, 肖慎翀. Q345/SUS304异种钢焊接接头固有应变的变化规律研究[J]. 中国机械工程, 2021, 32(15): 1868-1873.
[5]	王林1;潘骏1;贺青川1;丁炜2;顾利威2. 后倾式离心风机叶轮机器人焊接工艺优化[J]. 中国机械工程, 2020, 31(19): 2379-2387.
[6]	汪必升1;李毅波1,2;廖雅诗3;李剑1. 基于扩展有限元模型的动态应力强度因子计算[J]. 中国机械工程, 2019, 30(11): 1294-1301.
[7]	李秀红1，2;李刚3;任家骏1;李文辉1，2. 高速动车组斜齿轮的齿根裂纹萌生寿命数值计算[J]. 中国机械工程, 2018, 29(09): 1017-1024.
[8]	张燃1;李笑1;曹睿1;关婷2. 无线供电形状记忆合金驱动的尿道阀驱动特性研究[J]. 中国机械工程, 2017, 28(19): 2282-2288,2299.
[9]	凌静秀, 孙伟, 杨晓静, 童昕. 全断面隧道掘进机刀盘裂纹尖端应力强度因子收敛性分析[J]. 中国机械工程, 2017, 28(10): 1143-1148.
[10]	刘良宝, 孙剑飞, 陈五一, 陈清良. 7075T651铝合金板材内部初始残余应力分布研究 [J]. 中国机械工程, 2016, 27(04): 537-543.
[11]	孙凤, 张明, 孙兴伟, 金俊杰, 李清, 李殿起, 王可. 三自由度等刚度永磁弹簧的力学特性研究[J]. 中国机械工程, 2015, 26(8): 1005-1009.
[12]	孙士平, 胡政. 双足反向型直线超声电机的优化设计及性能仿真[J]. 中国机械工程, 2015, 26(13): 1783-1788.
[13]	胡振, 李笑, 关婷. 超声汽化蒸汽驱动的尿道阀的仿真与实验[J]. 中国机械工程, 2015, 26(13): 1789-1793.
[14]	黄华贵, 刘文文, 王巍, 杜凤山, . 基于生死单元法的双辊铸轧过程热-力耦合数值模拟[J]. 中国机械工程, 2015, 26(11): 1503-1508.
[15]	李欣冉, 陈无畏, 陈晓新. 基于刚柔耦合模型的悬架NVH性能研究[J]. 中国机械工程, 2014, 25(7): 978-983.