垂直型多级位移放大机构设计与力学解析建模

doi:10.3969/j.issn.1004-132X.2021.08.004

摘要/Abstract

摘要： 针对压电位移放大机构在垂直方向较难实现大行程、高频带宽度的问题，结合两个复合菱形机构、两个杠杆机构以及一个普通菱形机构，提出了一种垂直型多级位移放大机构。基于能量守恒方法和弹性梁理论建立了位移放大比和输入/输出刚度解析模型，根据拉格朗日方程推导了固有频率解析模型。通过有限元法对解析模型进行了验证，所建立的位移放大比解析模型有较高的预测精度，可为大行程垂直型柔顺平台的优化设计提供参考。与文献中的位移放大机构性能对比结果表明，提出的垂直型位移放大机构具有更好的静动态平衡性能，其位移放大比可达43.29，同时保持一个较高的固有频率561.28 Hz。

关键词: 压电驱动器, 位移放大机构, 柔性铰链, 力学解析, 垂直运动

Abstract: Piezoelectric displacement amplification mechanisms were difficult to obtain large working strokes and high frequency bandwidth in vertical direction. Therefore, a new vertical multistage displacement amplification mechanism was proposed by integrating two compound rhombus-type mechanisms, two lever mechanisms and a rhombus-type mechanism. Analytical models of displacement amplification ratio and input/output stiffness were deduced by energy conservation method and elastic beam theory. The analytical model of natural frequency was derived based on Lagrange equation. The analytical model was verified by finite element method. The analytical model of displacement amplification ratio herein has a high prediction accuracy and may provide a reference for optimal design of vertical compliant stage with a large working stroke. After compared with several vertical displacement amplification mechanisms from references, the proposed vertical multistage displacement mechanism shows better static and dynamic performances, with a displacement amplification ratio of 43.29 and a relative high natural frequency of 561.28 Hz.

Key words: piezoelectric actuator, displacement amplification mechanism, flexure hinge, mechanics analysis, vertical motion

中图分类号:

林超, 沈忠磊, 李坪洋, 郑山. 垂直型多级位移放大机构设计与力学解析建模[J]. 中国机械工程, 2021, 32(08): 908-915，937.

LIN Chao, SHEN Zhonglei, LI Pingyang, ZHENG Shan. Design and Mechanics Analytical Modeling of Vertical Multistage Displacement Amplification Mechanisms[J]. China Mechanical Engineering, 2021, 32(08): 908-915，937.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2021.08.004

http://www.cmemo.org.cn/CN/Y2021/V32/I08/908

参考文献

［1］黄卫清，党冰楠，王寅, 等. 双向作动大行程二自由度稳像机构［J］. 光学精密工程, 2017, 25(6):1494-1501.

HUANG Weiqing, DANG Bingnan, WANG Yin, et al. Two-freedom Image Stabilization Institution of Large Stroke of Bidirectional Actuation［J］. Optics and Precision Engineering, 2017, 25 (6):1494-1501.

［2］LU Mingming, ZHAO Dongpo, LIN Jieqiong, et al. Design and Analysis of a Novel Piezoelectrically Actuated Vibration Assisted Rotation Cutting System［J］. Smart Materials and Structures, 2018, 27(9):095020.

［3］LIN Chao, SHEN Zhonglei, WU Zhaohui, et al. Kinematic Characteristic Analysis of a Micro-/Nano Positioning Stage Based on Bridge-type Amplifier［J］. Sensors and Actuators A:Physical, 2018, 271:230-242.

［4］QIAN Feng, XU Tianbing, ZUO Lei. Design, Optimization, Modeling and Testing of a Piezoelectric Footwear Energy Harvester［J］. Energy Conversion and Management, 2018, 171:1352-1364.

［5］曹瑞珉, 郝丽娜, 高金海. 一种大工作空间密度的压电微动二维工作台设计［J］. 中国机械工程, 2017, 28(9):1016-1028.

CAO Ruimin, HAO Lina, GAO Jinhai. X-Y Micropositioning Piezostage Design with Large Workspace Density［J］. China Mechanical Engineering, 2017, 28(9):1016-1028.

［6］TEO T J, YANG G L, CHEN I M. A Large Deflection and High Payload Flexure-based Parallel Manipulator for UV Nanoimprint Lithography:Part Ⅰ. Modeling and Analyses［J］. Precision Engineering, 2014, 38(4):861-871.

［7］LING Mingxiang, CAO Junyi, JIANG Zhou, et al. Optimal Design of a Piezo-actuated 2-DOF Millimeter-range Monolithic Flexure Mechanism with a Pseudo-static Model［J］. Mechanical Systems and Signal Processing, 2019, 115:120-131.

［8］LING M, CAO J, JIANG Z, et al. Modular Kinematics and Statics Modeling for Precision Positioning Stage［J］. Mechanism and Machine Theory, 2017, 107:274-282.

［9］蒋州, 曹军义, 凌明祥, 等. 新型双臂菱形压电柔性机构理论设计与建模［J］. 中国机械工程, 2017, 28(21):2557-2566.

JIANG Zhou, CAO Junyi, LING Mingxiang, et al. Theoretical Design and Modeling of Novel Piezo-driven Rhombic Flexure Mechanism with Double Beams［J］. China Mechanical Engineering, 2017, 28(21):2557-2566.

［10］LING Mingxiang, CAO Junyi, JIANG Zhou, et al. Theoretical Modeling of Attenuated Displacement Amplification for Multistage Compliant Mechanism and Its Application［J］. Sensors and Actuators A:Physical, 2016, 249:15-22.

［11］DONG Wei, CHEN Fangxin, GAO Futian, et al. Development and Analysis of a Bridge-lever-type Displacement Amplifier Based on Hybrid Flexure Hinges［J］. Precision Engineering, 2018, 54:171-181.

［12］KIM H, KIM J, AHN D, et al. Development of a Nanoprecision 3-DOF Vertical Positioning System with a Flexure Hinge［J］. IEEE Transactions on Nanotechnology, 2013, 12(2):234-245.

［13］SHU D, NAZARETSKI E, KIM J, et al. Optomechanical Design of a Multilayer Laue Lens Test Bed for 10-nm Focusing of Hard X-rays［J］. Journal of Physics:Conference Series, 2013, 463:012029.

［14］戴蓉，谢铁邦，常素萍. 垂直扫描白光干涉表面三维形貌测量系统［J］. 光学技术, 2006, 32(4):545-552.

DAI Rong, XIE Tiebang, CHANG Suping. A Vertical Scanning White Light Interfering Profilometer［J］. Optical Technique, 2006, 32(4):545-552.

[1]	张萌, 张松林, 刘玉为, 刘时成, 范鹏举. 可调谐半导体激光器压电驱动系统的优化设计[J]. 中国机械工程, 2024, 35(04): 656-665.
[2]	陈鑫, 刘江南, 龙汪鹏, 吕剑文. 多交叉曲梁簧片柔性铰链的力学建模与性能分析[J]. 中国机械工程, 2023, 34(03): 269-276，286.
[3]	吴昊, 李宗轩, 张德福, 李清雅, 李云峰, . 交叉簧片柔性铰链设计[J]. 中国机械工程, 2022, 33(10): 1203-1209.
[4]	王传礼, 李成, 何涛, 陈国瑜, . 椭圆导角混合柔性铰链的设计计算与性能分析[J]. 中国机械工程, 2021, 32(09): 1017-1026.
[5]	刘庆玲;罗萍;于常娟. 新型直圆导角复合型多轴柔性铰链的柔度计算及其性能分析[J]. 中国机械工程, 2018, 29(20): 2479-2483.
[6]	蒋州1;曹军义1;凌明祥1,2;曾明华1;林京1. 新型双臂菱形压电柔性机构理论设计与建模[J]. 中国机械工程, 2017, 28(21): 2557-2561,2566.
[7]	王建红1;周浩2;许有熊1;刘娣1. 基于膜式液压放大的压电驱动器设计与试验[J]. 中国机械工程, 2017, 28(21): 2567-2572.
[8]	闫凯1,2,3;张静1,2,3;寇子明1,2,3. S形折叠式柔性铰链结构设计[J]. 中国机械工程, 2017, 28(14): 1696-1700.
[9]	曹瑞珉, 郝丽娜, 高金海. 一种大工作空间密度的压电微动二维工作台设计[J]. 中国机械工程, 2017, 28(09): 1016-1020,1028.
[10]	胡俊峰, 郑昌虎, 蔡建阳. 一种微操作平台的自适应运动跟踪控制[J]. 中国机械工程, 2017, 28(08): 905-911,916.
[11]	胡俊峰, 郑昌虎, 蔡建阳. 基于支持向量机的压电微操作平台非线性特性描述[J]. 中国机械工程, 2016, 27(22): 3012-3019.
[12]	李冲, 许立忠, 邢继春. 压电驱动器非线性机电耦合动力学求解与验证[J]. 中国机械工程, 2015, 26(24): 3275-3281.
[13]	郝永平, 董福禄, 张嘉易, 包丽雅. 基于MEMS机构装配的微夹持器研究[J]. 中国机械工程, 2014, 25(5): 596-601.
[14]	赵磊, 巩岩. 直梁圆角型柔性铰链的回转精度分析[J]. 中国机械工程, 2013, 24(6): 715-720.
[15]	赵磊;巩岩;华洋洋. 直梁圆角形柔性铰链的柔度矩阵分析[J]. 中国机械工程, 2013, 24(18): 2462-2468.