随机载荷下机械弹性车轮的热力耦合耐久性研究

doi:10.3969/j.issn.1004-132X.2021.14.005

中国机械工程 ›› 2021, Vol. 32 ›› Issue (14): 1669-1676.DOI: 10.3969/j.issn.1004-132X.2021.14.005

随机载荷下机械弹性车轮的热力耦合耐久性研究

张晨;赵又群;郑鑫;杜宜燕

南京航空航天大学能源与动力学院，南京，210016

出版日期:2021-07-25 发布日期:2021-08-04
通讯作者: 赵又群（通信作者），男，1968年生，教授、博士研究生导师。研究方向为车辆动态仿真与控制。E-mail：yqzhao@nuaa.edu.cn。
作者简介:张晨，男，1996年生，硕士研究生。研究方向为汽车设计理论与方法、汽车系统动力学。E-mail：z708838972@qq.com。
基金资助:
陆军装备预研专用技术项目（AGA19001）;
陆军研究技术项目（AQA19001）;
中央高校基本科研业务费专项资金（NP2020407）

Study on Thermal Coupling Durability of Mechanical Elastic Wheels under Random Loads

ZHANG Chen;ZHAO Youqun;ZHENG Xin;DU Yiyan

College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing，210016

Online:2021-07-25 Published:2021-08-04

摘要/Abstract

摘要： 为了预测机械弹性车轮在直线行驶工况且承受路面不平导致的随机载荷的条件下所能达到的最大行驶里程，对机械弹性车轮耐久性进行了研究。结合车轮的结构特性，建立了用于耐久性研究的有限元模型。考虑路面不平度，确定车速与车轮动载荷、动载系数的关系，并以等效循环载荷加载至车轮。基于疲劳损伤理论和疲劳试验方法，利用Fe-safe软件对车轮的耐久性进行预测，得出最大行驶里程为8787 km。再对卡环进行热力耦合耐久性分析，发现最小寿命位置为中间销耳处，最大行驶里程为5258 km。

关键词: 机械弹性车轮, 耐久性, 热力耦合, 随机载荷

Abstract: In order to predict the maximum driving range of mechanical elastic wheels under random loads caused by uneven road surfaces under straight driving conditions, the durability of mechanical elastic wheels was studied. A finite element model for durability research was established based on structure characteristics of the wheels. Considering uneven roads, the relationships of speeds, dynamic loads and dynamic load coefficients of the wheels were determined, and the equivalent cyclic loads were applied to the wheels. Based on fatigue damage theory and fatigue test methods, the FE-safe software was used to predict the durability of wheels, and the maximum driving range is as 8787 km. The thermal coupling durability of the clasps was analyzed, and the minimum life position is the middle pin ear, and the maximum driving range is as 5258 km.

Key words: mechanical elastic wheel, durability, thermal coupling, random load

中图分类号:

U463.34

张晨, 赵又群, 郑鑫, 杜宜燕. 随机载荷下机械弹性车轮的热力耦合耐久性研究[J]. 中国机械工程, 2021, 32(14): 1669-1676.

ZHANG Chen, ZHAO Youqun, ZHENG Xin, DU Yiyan. Study on Thermal Coupling Durability of Mechanical Elastic Wheels under Random Loads[J]. China Mechanical Engineering, 2021, 32(14): 1669-1676.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2021.14.005

http://www.cmemo.org.cn/CN/Y2021/V32/I14/1669

参考文献

［1］NARASIMHAN A, ZIEGERT J C, THOMPSON L L, et al. Effects of Material Properties on Static Load-deflection and Vibration of a Non-pneumatic Tire during High-speed Rolling［J］. SAE International Journal of Passenger Cars:Mechanical Systems, 2011, 4(1):59-72.
［2］BRAS B,COBERT A. Life-cycle Environmental Impact of Michelin Tweel Tire for Passenger Vehicles［J］. SAE International Journal of Passenger Cars:Mechanical Systems, 2011, 4(1):32-43.
［3］JIN X, CHENG H, FAN X, et al. Investigation on the Static and Dynamic Behaviors of Non-pneumatic Tires with Honeycomb Spokes［J］. Composite Structures, 2018, 187:27-35.
［4］赵敏. 韩泰iFlex轮胎性能与传统轮胎相似［J］. 橡胶工业, 2015, 62(9):575.
ZHAO Min. Hankook iFlex Tyre Performance Is Similar to the Traditional Tire［J］. Rubber Industry, 2015, 62(9):575.
［5］闫乐乐, 赵又群, 付宏勋, 等. 机械弹性车轮的结构参数化设计［J］. 中国机械工程, 2016, 27(9):1251-1256.
YAN Lele, ZHAO Youqun, FU Hongxun, et al. Structure Parameterized Design for a New Mechanical Elastic Wheel［J］. China Mechanical Engineering, 2016, 27(9):1251-1256.
［6］姜成, 赵又群, 阮米庆, 等. 非充气安全轮胎技术现状与发展［J］. 机械设计与制造, 2013(9):266-268.
JIANG Cheng, ZHAO Youqun, RUAN Miqing, et al. The Current Situation and Development of Non-pneumatic Safety Tire［J］. Machinery Design & Manufacture, 2013(9):266-268.
［7］姚卫星, 孙文, 薛济坤. 基于物理原型的结构疲劳寿命评估方法［J］. 南京航空航天大学学报, 2014, 46(3):335-340.
YAO Weixing, SUN Wen, XUE Jikun. Physical Prototype Centered Assessment for Fatigue Life of Structure［J］. Journal of Nanjing University of Aeronautics & Astronautics, 2014, 46(3):335-340.
［8］王延忠, 杨凯, 齐荣华, 等. 航空发动机叶轮超高周疲劳寿命预测方法［J］. 浙江大学学报(工学版), 2019,53(4):621-627.
WANG Yanzhong, YANG Kai, QI Ronghua, et al. Ultra-high Cycle Fatigue Life Prediction Method for Aero Engine Impeller［J］. Journal of Zhejiang University (Engineering Science), 2019,53(4):621-627.
［9］TOPA M M, ERCAN S, KURALAY N S. Fatigue Life Prediction of a Heavy Vehicle Steel Wheel under Radial Loads by Using Finite Element Analysis［J］. Engineering Failure Analysis, 2012, 20(3):67-79.
［10］WAN X F, SHAN Y C, LIU X D, et al. Simulation of Biaxial Wheel Test and Fatigue Life Estimation Considering the Influence of Tire and Wheel Camber［J］. Advances in Engineering Software, 2016, 92:57-64.
［11］ZHAO Y, MA M, QIN R S, et al. A Fabrication History Based Strain-Fatigue Model for Prediction of Crack Initiation in a Radial Loading Wheel［J］. Fatigue & Fracture of Engineering Materials & Structures, 2017, 40(11):1882-1892.
［12］郝琪, 蔡芳. 钢制车轮弯曲试验多轴疲劳寿命预测研究［J］. 汽车技术, 2011(2):47-50.
HAO Qi, CAI Fang. The Study on Steel Wheel Multi-axial Fatigue Life Prediction of Bending Test［J］. Automobile Technology, 2011(2):47-50.
［13］张明杰, 赵又群, 杜现斌, 等. 机械弹性车轮疲劳寿命及其影响因素研究［J］. 哈尔滨工程大学学报, 2016, 37(11):1560-1564.
ZHANG Mingjie, ZHAO Youqun, DU Xianbin, et al. Fatigue Life and Influencing Factors of a Mechanical Elastic Wheel［J］. Journal of Harbin Engineering University, 2016, 37(11):1560-1564.
［14］汪伟, 赵又群, 黄超, 等. 新型机械弹性车轮的建模与通过性研究［J］. 中国机械工程, 2013, 24(6):724-729.
WANG Wei, ZHAO Youqun, HUANG Chao, et al. Modeling and Trafficability Analysis of New Mechanical Elastic Wheel［J］. China Mechanical Engineering, 2013, 24(6):724-729.
［15］汪伟, 赵又群, 姜成,等. 新型机械弹性车轮的力学传递特性分析［J］. 江苏大学学报(自然科学版), 2013, 34(3):261-266.
WANG Wei, ZHAO Youqun, JIANG Cheng, et al. Characteristics Analysis of Mechanical Transmission for a New Mechanical Elastic Wheel［J］. Journal of Jiangsu University (Natural Science Edition), 2013, 34(3):261-266.
［16］DU Y, LIU C, LI Y. Velocity Control Strategies to Improve Automated Vehicle Driving Comfort［J］. IEEE Intelligent Transportation Systems Magazine, 2018, 10(1):8-18.
［17］王直民, 张土乔, 吴小刚. 不平整路面上的车辆等效动载系数［J］. 浙江大学学报(工学版), 2007,41(6):1007-1011.
WANG Zhimin, ZHANG Tuqiao, WU Xiaogang. Equivalent Vehicle Dynamic Load Coefficient on Rough Pavement［J］. Journal of Zhejiang University (Engineering Science), 2007,41(6):1007-1011.
［18］岳红旭, 赵又群. 一种新型安全车轮的非线性有限元分析［J］. 中国机械工程, 2012, 23(11):1380-1385.
YUE Hongxu, ZHAO Youqun. Nonlinear Finite Element Analysis of a New Safety Wheel［J］. China Mechanical Engineering, 2012, 23(11):1380-1385.
［19］赵又群, 李小龙, 张明杰, 等. 机械弹性车轮随机振动理论与数值分析［J］. 哈尔滨工业大学学报, 2015, 47(7):47-51.
ZHAO Youqun, LI Xiaolong, ZHANG Mingjie, et al. Theoretical and Numerical Analysis on the Random Vibration of Mechanical Elastic Wheel［J］. Journal of Harbin Institute of Technology, 2015, 47(7):47-51.

[1]	李朕均, 赵春雨. 进给系统角接触球轴承的热力耦合分析[J]. 中国机械工程, 2023, 34(07): 821-829.
[2]	邹喜红, 凌龙, 陈静, 王超, 苟林林, 蒋明聪, 袁冬梅. 用户关联的驱动桥试验场耐久性试验规范研究[J]. 中国机械工程, 2022, 33(14): 1670-1679.
[3]	董国疆, 张猛, 魏留伟, 张永强. 底盘构件多轴随机载荷下高周疲劳准则研究[J]. 中国机械工程, 2021, 32(19): 2294-2304.
[4]	于佳伟, 郑松林, 赵礼辉, 井清. 基于非参数核密度估计法的车辆大数据服役载荷外推方法[J]. 中国机械工程, 2021, 32(11): 1307-1314.
[5]	郑鑫;赵又群;王秋伟;张陈曦. 匹配机械弹性车轮的电子稳定控制器参数分析[J]. 中国机械工程, 2020, 31(23): 2883-2890.
[6]	陈永亮1; 杨子超1;林恒利1;崔雷2;宋建岭3;王东坡2 . 拉锻式摩擦塞焊的热力耦合解析模型和试验验证[J]. 中国机械工程, 2020, 31(17): 2118-2127.
[7]	聂昕1;肖兵兵1;申丹凤2;郭文峰1. 考虑变形热和摩擦热效应的热力耦合冲压研究[J]. 中国机械工程, 2020, 31(16): 2005-2015.
[8]	藤瑞品1;宋晓琳1;刘国云2;曾俊伟2. 二维随机载荷作用下汽车螺旋弹簧疲劳损伤研究[J]. 中国机械工程, 2019, 30(21): 2590-2597.
[9]	赵又群;白毅强;叶超;邓耀骥;徐瀚;王秋伟. 机械弹性车轮静动态特性研究[J]. 中国机械工程, 2019, 30(19): 2306-2312.
[10]	李海青；赵又群. 机械弹性车轮结构参数对汽车侧翻稳定性的影响[J]. 中国机械工程, 2019, 30(13): 1519-1527.
[11]	藤瑞品;宋晓琳. 二维随机载荷作用下疲劳寿命的研究[J]. 中国机械工程, 2017, 28(24): 3017-3023.
[12]	郑松林1,2;王烁1;冯金芝1,2;陈铁1;于佳伟1. 多轴载荷作用下减振器耐久性试验载荷谱编制[J]. 中国机械工程, 2017, 28(21): 2547-2552.
[13]	吴仲伟, 刘光复, 成焕波. 基于热力耦合模型的热固性聚氨酯再生材料制备与性能分析[J]. 中国机械工程, 2016, 27(18): 2540-2546.
[14]	王强, 赵又群, 杜现斌, 付宏勋. 机械弹性车轮径向刚度和阻尼模型的分析[J]. 中国机械工程, 2016, 27(10): 1408-1413.
[15]	闫乐乐, 赵又群, 付宏勋, 王强. 机械弹性车轮的结构参数化设计[J]. 中国机械工程, 2016, 27(09): 1251-1256.

随机载荷下机械弹性车轮的热力耦合耐久性研究

Study on Thermal Coupling Durability of Mechanical Elastic Wheels under Random Loads

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics