超低温介质内冷式刀柄的设计及试验研究

doi:10.3969/j.issn.1004-132X.2022.05.009

中国机械工程 ›› 2022, Vol. 33 ›› Issue (05): 600-606.DOI: 10.3969/j.issn.1004-132X.2022.05.009

• 清洁切削关键功能部件 • 上一篇下一篇

超低温介质内冷式刀柄的设计及试验研究

赵地;王永青;刘阔;邢家鹏;刘海波

大连理工大学精密与特种加工教育部重点实验室，大连，116024

出版日期:2022-03-10 发布日期:2022-03-24
通讯作者: 刘阔（通信作者），男，1983年生，教授、博士研究生导师。研究方向为超低温冷却加工技术与装备、机床热/空间误差理论与技术、加工状态在线监测与智能调控技术。发表论文60余篇。E-mail:liukuo@dlut.edu.cn。
作者简介:赵地，男，1994年生，博士研究生。研究方向为超低温加工技术与装备、超低温加工传热机理。E-mail：zhaodi96@163.com。
基金资助:
国家重点研发计划 (2019YFB2005400)；
长江学者特聘教授奖励计划(T2017030);
大连市高层次人才创新支持计划(2018RD05)

Design and Experimental Study of Cryogenic Medium Internal Cooling Toolholders

ZHAO Di;WANG Yongqing;LIU Kuo;XING Jiapeng;LIU Haibo

Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian，Liaoning,116024

Online:2022-03-10 Published:2022-03-24

摘要/Abstract

摘要： 为满足常规机床超低温内冷式改造需求，设计了超低温内冷式刀柄，提出了内层旋转、外层静止的刀柄双层构型思路，分析了刀柄的传热过程及强度可靠性并进行了结构优化，利用热流固耦合数值模拟验证了刀柄的温度场、整体形变与强度。在此基础上，研制出超低温内冷式刀柄一套，开展了几何精度与热平衡温度测试。研究结果表明：刀柄隔热性能良好，且在稳定工作状态下可保持较高的几何精度，可满足常规机床的超低温内冷式加工需求，为超低温清洁切削技术的深入研究奠定了基础。

关键词: 清洁切削技术, 超低温加工, 刀柄, 隔热, 热流固耦合

Abstract: In order to meet the requirements of cryogenic internal cooling reformation for conventional machine tools, a cryogenic internal cooling toolholder was designed. The idea of double-layer of the toolholder with inner rotation and outer static was proposed. Heat transfer processes and the strength reliability of the toolholder were analyzed and the structures were optimized. The temperature fields, overall deformations and strengths of the toolholder were verified by thermal-fluid-solid coupling simulation. Then, a cryogenic medium internal cooling toolholder was developed, and the geometric accuracy and temperature change were tested. The research results show that the toolholders have good thermal insulation performance and may maintain high geometric accuracy in stable working states, which may meet the requirements of cryogenic internal cooling machining of conventional machine tools, and lays a foundation for further study on ultra-low temperature clean cutting technology.

Key words: clean cutting technology, cryogenic machining, toolholder, thermal insulation, thermal-flow-solid coupling

中图分类号:

TH136

赵地, 王永青, 刘阔, 邢家鹏, 刘海波. 超低温介质内冷式刀柄的设计及试验研究[J]. 中国机械工程, 2022, 33(05): 600-606.

ZHAO Di, WANG Yongqing, LIU Kuo, XING Jiapeng, LIU Haibo. Design and Experimental Study of Cryogenic Medium Internal Cooling Toolholders[J]. China Mechanical Engineering, 2022, 33(05): 600-606.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2022.05.009

http://www.cmemo.org.cn/CN/Y2022/V33/I05/600

参考文献

［1］王永青, 郭东明, 郭立杰，等. 超低温加工技术的研究现状及发展趋势［J］. 上海航天（中英文）, 2020, 37(3):11-21.
WANG Yongqing, GUO Dongming, GUO Lijie, et al. Research Status and Development Trend of Cryogenic Machining Technology［J］. Aerospace Shanghai(Chinese & English), 2020, 37(3)：11-21.
［2］SHOKRANI A, DHOKIA V, MUNOZ-ESCALONA P, et al. State-of-the-art Cryogenic Machining and Processing ［J］. International Journal of Computer Integrated Manufacturing, 2013, 26(7):616-648.
［3］JAWAHIR I S, ATTIA H, BIERMANN D, et al. Cooling Techniques for Improved Productivity in Turning ［J］. International Journal of Machine Tools & Manufacture, 2009, 49:435-453.
［4］HONG S Y. Economical and Ecological Cryogenic Machining ［J］. Journal of Manufacturing Science and Engineering:Transactions of the ASMR, 2006, 123(2):331-338.
［5］HONG S Y. Lubrication Mechanisms of LN2 in Ecological Cryogenic Machining ［J］. Machining Science and Technology, 2006, 10(1):133-155.
［6］PAUL S, CHATTOPADHYAY A B. Environmentally Conscious Machining and Grinding with Cryogenic Cooling ［J］. Machining Science and Technology, 2006, 10(1):87-131.
［7］LIN Haisheng, WANG Chengyong, YUAN Yaohui, et al. Tool Wear in Ti-6Al-4V Alloy Turning under Oils on Water Cooling Comparing with Cryogenic Air Mixed with Minimal Quantity Lubrication ［J］. International Journal of Advanced Manufacturing Technology, 2015, 81(1/4):87-101.
［8］邵钦作.2010年美国国际制造技术展览会技术考察［J］.世界制造技术与装备市场, 2010(6):44-56.
SHAO Qinzuo. Impression on Technological Deve-loping Trends Shown by IMTS2010 ［J］. World Manufacturing Engineering & Market, 2010(6):44-56.
［9］GONG Le, ZHAO Wei, REN Fei, et al. Experimental Study on Surface Integrity in Cryogenic Milling of 35CrMnSiA High-strength Steel ［J］. The International Journal of Advanced Manufacturing Technology, 2019, 103:605-615.
［10］WANG Yongqing, HAN Lingsheng, LIU Kuo, et al. Optimization of Jet Parameters for Minimizing Surface Roughness in Cryogenic Milling of Ti-6Al-4V ［J］. Journal of Manufacturing Science and Engineering—Transactions of the ASME, 2021, 143(5):051011.
［11］王永青, 韩灵声, 刘阔,等. 超低温加工机床的液氮冷却介质可靠传输与精准调控［J］. 机械工程学报, 2021, 56(1):187-195.
WANG Yongqing, HAN Lingsheng, LIU Kuo, et al. Reliable Transmission and Precise Regulation of Liquid Nitrogen as the Coolant of Cryogenic Machine Tool ［J］. Journal of Mechanical Engineering, 2021, 56(1):187-195.
［12］JAWAHIR I S, ATTIA H, BIERMANN D, et al. Cryogenic Manufacturing Processes［J］. CIRP Annals:Manufacturing Technology, 2016, 65(2):713-736.
［13］MUKKOTI V, SANKARAIAH G, YOHAN M. Effect of Cryogenic Treatment of Tungsten Carbide Tools on Cutting Force and Power Consumption in CNC Milling Process ［J］. Production & Manufacturing Research, 2018, 6(1):149-170.
［14］LIU Junfeng, CHEN Xiaoan, KANG Huimin, et al. Analysis on Thermal Properties of Grease-lubricated Ball Bearing ［J］. Mechanical Science and Technology for Aerospace Engineering, 2014, 33(6):845-848.

[1]	文彦臻, 邓云华, 贾震. 气凝胶填充金属蜂窝夹层结构隔热性能试验与模拟[J]. 中国机械工程, 2023, 34(05): 556-562.
[2]	钟颖虹, 陆辛, 计亚平, 冯泽舟, 王林, 冯艳玲, 于浩, 李飞. 等离子喷涂ZrO2-8%Y2O3热障涂层的组织与性能研究[J]. 中国机械工程, 2016, 27(07): 965-969,993.
[3]	陈建, 王贵成, 田良, 沈春根, 郑登升. 基于结合部的HSK主轴-刀柄系统动态特性分析[J]. 中国机械工程, 2016, 27(03): 296-301.
[4]	刘雪梅, 李爱平, 谭顺利. HSK刀柄-主轴结合面接触特性及其影响分析[J]. 中国机械工程, 2015, 26(8): 1000-1005.
[5]	王军, 马灿, 韩亚丽, 张淳. 离心力驱动液压膨胀式高速刀柄设计[J]. 中国机械工程, 2015, 26(21): 2941-2945,2962.
[6]	李广慧, 尹凝霞, 徐红, 谭光宇. 嵌入式测温工具系统的结构设计及模态分析[J]. 中国机械工程, 2015, 26(21): 2862-2866.
[7]	陈建, 王贵成, 王树林, 刘春春, 杨晨. HSK热装刀柄的加热性能分析[J]. 中国机械工程, 2013, 24(23): 3235-3239.
[8]	张国军1, 臧运峰1, 吕枫2, 修世超1. 数控机床HSK刀柄和主轴在高速旋转下的连接性能分析[J]. 中国机械工程, 2012, 23(6): 631-636.

超低温介质内冷式刀柄的设计及试验研究

Design and Experimental Study of Cryogenic Medium Internal Cooling Toolholders

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics