齿面干涉测量系统的成像畸变分析与光路优化

doi:10.3969/j.issn.1004-132X.2022.10.011

中国机械工程 ›› 2022, Vol. 33 ›› Issue (10): 1219-1225.DOI: 10.3969/j.issn.1004-132X.2022.10.011

齿面干涉测量系统的成像畸变分析与光路优化

王兆辉1;杨鹏程1;徐晋1;梁蒲佳1;朱新栋2

1.西安工程大学机电工程学院，西安，710048
2.西安交通大学制造系统工程国家重点实验室，西安，710049

出版日期:2022-05-25 发布日期:2022-06-09
通讯作者: 杨鹏程（通信作者），男，1985年生，副教授。研究方向为精密干涉测量、光机电一体化技术等。发表论文20余篇。E-mail：yangpengcheng@xpu.edu.cn。
作者简介:王兆辉，男，1996年生，硕士研究生。研究方向为精密干涉测量。
基金资助:
陕西省自然科学基础研究计划（2022JM-219）；
广东省企业重点实验室开放基金（2021B1212050012-05）；
西安工程大学研究生创新基金（chx2021008）

Imaging Distortion Analysis and Optical Path Optimization of Tooth Surface Interferometry Systems

WANG Zhaohui1;YANG Pengcheng1 ;XU Jin1;LIANG Pujia1;ZHU Xindong2

1.College of Mechanical and Electrical Engineering，Xian Polytechnic University，Xian，710048
2.State Key Laboratory of Manufacturing Systems Engineering，Xian Jiaotong University，Xian，710049

Online:2022-05-25 Published:2022-06-09

摘要/Abstract

摘要： 针对由物体光路误差导致的齿面像形状畸变现象，利用精确光线追迹算法分析了可能导致齿面像形状畸变的三种因素，明确了齿面像形状畸变的主要误差来源，建立了齿面像形状畸变的判断模型，确立了齿面像形状畸变和齿轮轴线倾斜之间的映射关系，提出了基于齿面像形状畸变特征的物体光路优化方法。最后进行了实验验证，结果表明误差控制在2%左右，证明了所提方法的合理性与正确性。

关键词: 激光干涉, 干涉条纹, 齿面像, 形状畸变

Abstract: Aiming at the tooth surface image shape distortions caused by object optical path errors， three factors that might lead to tooth surface image shape distortions were analyzed by using accurate ray tracing algorithm， the main error sources of tooth surface image shape distortions were defined， the judgment model of tooth surface image shape distortions was established， and the mapping relationship between tooth surface image shape distortions and gear axis inclination was established. An object optical path optimization method was proposed based on the shape distortions of tooth surface images. Finally， the experimental verification was carried out， and the results show that the error ranges are controlled at about 2%， which prove the rationality and correctness of the proposed method.

Key words: laser interference, interferogram, tooth surface image, shape distortion

中图分类号:

TN249

王兆辉, 杨鹏程, 徐晋, 梁蒲佳, 朱新栋. 齿面干涉测量系统的成像畸变分析与光路优化[J]. 中国机械工程, 2022, 33(10): 1219-1225.

WANG Zhaohui, YANG Pengcheng , XU Jin, LIANG Pujia, ZHU Xindong. Imaging Distortion Analysis and Optical Path Optimization of Tooth Surface Interferometry Systems[J]. China Mechanical Engineering, 2022, 33(10): 1219-1225.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2022.10.011

http://www.cmemo.org.cn/CN/Y2022/V33/I10/1219

参考文献

［1］WANG Yanzhong，ZHANG Wei，LIU Yang.Analysis Model for Surface Residual Stress Distribution of Spiral Bevel Gear by Generating Grinding［J］.Mechanism and Machine Theory，2018，130：477-490.
［2］高洁，刘振侠，扶碧波，等.直升机主减速器变形对传动性能的影响分析［J］.航空动力学报，2018，33（7）：1736-1742.
GAO Jie，LIU Zhenxia，FU Bibo，et al.Analysis of Influence of Helicopter Main Gearbox Deformation on Transmission Performance［J］.Journal of Aerospace Power，2018，33（7）：1736-1742.
［3］TAKEOKA F，KOMORI M，TAKAHASHI M，et al.Gear Checker Analysis and Evaluation Using a Virtual Gear Checker［J］.Measurement Science and Technology，2009，20（4）：045104.
［4］STOUT K J，BLUNT L.Three Dimensional Surface Topography［M］.Amsterdam：Elsevier，2000.
［5］SASAKI O，YAMAMURA R，YOKOYAMA K，et al.Inner Surface Profile Measurement of a Hydrodynamic Bearing by an Oblique Incidenceand Two-wavelength Interferometer［J］.Proceedings of SPIE—The International Society for Optical Engineering，2009，7432：74320J-5.
［6］FANG Suping，FUJIO H，KUBO A，et al.New Optical System for Reducing the Interference Fringe Density in Laser Interferometric Measurement of Tooth Flank Form of a Gear［J］.JSME International Journal Series C Mechanical Systems，Machine Elements and Manufacturing，2000，43（2）：455-463.
［7］CHEN Yicheng，CHEN Jryi.Optical Inspection System for Gear Tooth Surfaces Using a Projection Moiré Method［J］.Sensors，2019，19（6）：1450-1465.
［8］ZHU Xindong，FANG Suping，YANG Pengcheng，et al.Construction of Virtual Measurement Datum in Measuring Gear Tooth Flank by Laser Interferometry［J］.Optical Engineering，2018，57（9）：094102.
［9］高莹莹，杨建峰，马晓龙，等.基于Fourier-Meliin算法的干涉图像配准［J］.光学精密工程，2007，15（9）：1415-1420.
GAO Yingying，YANG Jianfeng，MA Xiaolong，et al.Interference Image Registration Based on Fourier-Mellin Algorithm［J］.Optics and Precision Engineering，2007，15（9）：1415-1420.
［10］FANG Suping，ZHU Xindong，YANG Pengcheng，et al.Affect of Interference Fringe Width for Processing Accuracy and Its Recognition in Measuring Form Deviation of Tooth Flank with Laser Interferometry［J］.Optics Communications，2014，328：49-56.
［11］TAHARA T，OMAE K，OTANI R，et al.Relationship between the Image Quality and Constant Phase Shifts in Phase-shifting Interferometry Selectively Extracting Wavelength Information［C］∥JSAP-OSA Joint Symposia.Niigata，2016：14a_C301_2.
［12］YANG Pengcheng，LIU Yang，FANG Suping，et al.Interferogram Stitching Method in Measuring the Form Deviation of Curved Surface with Laser Interferometry［J］.Optics Communications，2017，387：303-309.
［13］WRIGHT D.Pseudo Feature Point Registration of Pavement Images［J］.Journal of Traffic and Transportation Engineering（English Edition），2018，5（4）：254-267.
［14］YANG Pengcheng，YANG Sheqiang，XIAO Yuan，et al.Calibration of Geometric Distortion Based on a Reference Sheet in Oblique Laser Interferometry［J］.Optik，2019，183：47-54.
［15］FANG Suping，WANG Leijie，YANG Pengcheng，et al.Improvement of the Oblique-incidence Optical Interferometric System to Measure Tooth Flanks of Involute Helical Gears［J］.Journal of the Optical Society of America A，2011，28（4）：590-595.
［16］FANG Suping，WANG Leijie，KOMORI M，et al.Simulation Method for Interference Fringe Patterns in Measuring Gear Tooth Flanks by Laser Interferometry［J］.Applied Optics，2010，49（33）：6409-6415.

[1]	吴志顺, 崔长彩, 叶瑞芳, 黄辉, 李兵, 黄春棋. 基于阈值判定法的白光干涉仪自动扫描技术研究[J]. 中国机械工程, 2012, 23(12): 1482-1486.
[2]	王淑珍, 王生怀, 谢铁邦. 大量程纳米级垂直扫描系统研究 [J]. 中国机械工程, 2010, 21(04): 387-390,476.
[3]	刘晓军;王益民;. 同步相移干涉表面精密测量[J]. J4, 2009, 20(18): 0-2148.
[4]	王淑珍;谢铁邦;常素萍;王选择;. 四象限光电探测器用于表面形貌测量的研究[J]. J4, 2008, 19(19): 0-2354.

齿面干涉测量系统的成像畸变分析与光路优化

Imaging Distortion Analysis and Optical Path Optimization of Tooth Surface Interferometry Systems

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics