外流体基液类型对纳米流体同轴静电雾化切削的影响研究

doi:10.3969/j.issn.1004-132X.2023.07.005

中国机械工程 ›› 2023, Vol. 34 ›› Issue (07): 796-802.DOI: 10.3969/j.issn.1004-132X.2023.07.005

外流体基液类型对纳米流体同轴静电雾化切削的影响研究

苏宇1;吴事凯1;姜海2

1.江苏科技大学机械工程学院，镇江，212100
2.原轼新型材料有限公司，镇江，212100

出版日期:2023-04-10 发布日期:2023-05-04
作者简介:苏宇，男，1979年生，教授。研究方向为清洁加工理论与技术。E-mail:suyuliu@sohu.com。
基金资助:
国家自然科学基金（52175411）；江苏省自然科学基金（BK20171307）

Study on Influences of Base Fluid Type of External Fluid on Nanofluid Coaxial Electrostatic Atomization Cutting

SU Yu1;WU Shikai1;JIANG Hai2

1.College of Mechanical Engineering,Jiangsu University of Science and Technology,Zhenjiang,
Jiangsu,212100
2.Yuanshi New Materials Co.,Ltd.,Zhenjiang,Jiangsu,212100

Online:2023-04-10 Published:2023-05-04

摘要/Abstract

摘要： 在构建同轴静电雾化切削试验平台的基础上，以蓖麻油、大豆油、菜籽油、棕榈油、LB2000及其碳纳米管油基纳米流体为外流体，以去离子水及其碳纳米管水基纳米流体为内流体，分析了不同外流体基液类型下同轴静电雾化荷电性能和复合液滴电润湿性能，研究了外流体基液类型对纳米流体同轴静电雾化切削的切削力和温度的影响。结果表明：LB2000适合作为纳米流体同轴静电雾化切削的外流体基液，可有效减小切削力和降低温度，且以LB2000/水基纳米流体为外/内流体时，减力降温的综合效果最佳。

关键词: 纳米流体, 同轴静电雾化, 荷电性能, 电润湿性能, 雾化切削

Abstract: Based on the construction of coaxial electrostatic atomization cutting test platform, taking castor oil, soybean oil, rapeseed oil, palm oil, LB2000 and its carbon nanotube oil-based nanofluid as external fluid, taking deionized water and its carbon nanotube water-based nanofluid as internal fluid, the charging performance of coaxial electrostatic atomization and the electrowetting performance of composite droplets under different types of base fluid of external fluid were analyzed. The effects of base fluid type of external fluid on the cutting force and temperature of nanofluid coaxial electrostatic atomization cutting were studied. Results show that LB2000 is suitable as the base fluid of external fluid for nanofluid coaxial electrostatic atomization cutting, which may effectively reduce the cutting force and temperature, and the comprehensive effects of force reduction and cooling are the best when LB2000/water-based nanofluid used as external/internal fluid.

Key words: nanofluid, coaxial electrostatic atomization, charging performance, electrowetting performance, atomization cutting

中图分类号:

苏宇, 吴事凯, 姜海. 外流体基液类型对纳米流体同轴静电雾化切削的影响研究[J]. 中国机械工程, 2023, 34(07): 796-802.

SU Yu, WU Shikai, JIANG Hai. Study on Influences of Base Fluid Type of External Fluid on Nanofluid Coaxial Electrostatic Atomization Cutting[J]. China Mechanical Engineering, 2023, 34(07): 796-802.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2023.07.005

http://www.cmemo.org.cn/CN/Y2023/V34/I07/796

参考文献

［1］BOSWELL B, ISLAM M N, DAVIES I J, et al. A Review Identifying the Effectiveness of Minimum Quantity Lubrication(MQL) during Conventional Machining［J］.The International Journal of Advanced Manufacturing Technology, 2017, 92:321-340.
［2］CHETAN, GHOSH S, RAO P V. Application of Sustainable Techniques in Metal Cutting for Enhanced Machinability:a Review［J］. Journal of Cleaner Production, 2015, 100:17-34.
［3］袁松梅, 韩文亮, 朱光远, 等. 绿色切削微量润滑增效技术研究进展［J］. 机械工程学报, 2019, 55(5):175-185.
YUAN Songmei, HAN Wenliang, ZHU Guangyuan, et al. Recent Progress on the Efficiency Increasing Methods of Minimum Quantity Lubrication Technology in Green Cutting［J］. Journal of Mechanical Engineering, 2019, 55(5):175-185.
［4］杨简彰, 王成勇, 袁尧辉, 等. 微量润滑复合增效技术及其应用研究进展［J］. 中国机械工程, 2022, 33(5):506-528.
YANG Jianzhang, WANG Chengyong, YUAN Yaohui, et al. State-of-the-art on MQL Synergistic Technologies and Their Applications［J］. China Mechanical Engineering, 2022, 33(5):506-528.
［5］WANG C Y, LIN H S,WANG X, et al. Effect of Different Oil-on-water Cooling Conditions on Tool Wear in Turning of Compacted Graphite Cast Iron［J］. Journal of Cleaner Production, 2017, 148:477-489.
［6］CAI C Y, LIANG X, AN Q L, et al. Cooling/Lubrication Performance of Dry and Supercritical CO2-based Minimum Quantity Lubrication in Peripheral Milling Ti-6Al-4V［J］. International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, 8:405-421.
［7］WANG Y G, LI C H, ZHANG Y B, et al. Experimental Evaluation of the Lubrication Properties of the Wheel/Workpiece Interface in MQL Grinding with Different Nanofluids［J］. Tribology International, 2016, 99:198-210.
［8］张高峰, 李景焘, 王志刚, 等. 低温冷风纳米粒子微量润滑磨削轴承钢试验研究［J］. 中国机械工程, 2019, 30(19):2342-2348.
ZHANG Gaofeng, LI Jingtao, WANG Zhigang, et al. Experimental Study on Nano-CMQL Grinding of Bearing Steels［J］. China Mechanical Engineering, 2019, 30(19):2342-2348.
［9］SU Y, LU Q, YU T, et al. Machining and Environmental Effects of Electrostatic Atomization Lubrication in Milling Operation［J］. The International Journal of Advanced Manufacturing Technology, 2019, 104:2773-2782.
［10］SU Y, JIANG H, LIU Z Q. A Study on Environment-friendly Machining of Titanium Alloy via Composite Electrostatic Spraying［J］.The International Journal of Advanced Manufacturing Technology, 2020, 110:1305-1317.
［11］汤正成, 苏宇. 同轴静电雾化切削雾化研究［J］. 工具技术, 2018, 52(5):51-55.
TANG Zhengcheng, SU Yu. Investigation on Coaxial Electrostatic Atomization Cutting［J］. Tool Engineering, 2018, 52(5):51-55.
［12］FOX N J, STACHOWIAK G W. Vegetable Oil-based Lubricants:a Review of Oxidation［J］. Tribology International, 2007, 40:1035-1046.
［13］DEBNATH S, REDDY M M, YI Q S. Environmental Friendly Cutting Fluids and Cooling Techniques in Machining:a Review［J］. Journal of Cleaner Production, 2014, 83:33-47.
［14］殷庆安. 纳米流体微量润滑端面铣削铣刀/工件界面的摩擦学特性与实验研究［D］. 青岛:青岛理工大学, 2018.
YIN Qingan. Tribological Performance and Experimental Study of the Tool/Workpiece Interface in Nanofluids MQL End-milling［D］. Qingdao:Qing-dao University of Technology, 2018.
［15］张玉珂. 油脂导热系数的测定及其传热性能的研究［D］. 郑州:河南工业大学, 2015.
ZHANG Yuke. Determination of Thermal Conductivity and Research of Heat Transfer Performance of the Edible Vegetables Oil［D］. Zhengzhou:Henan University of Technology, 2015.

[1]	张宇, 王德祥, 郭峰, 栗心明, . 球形纳米颗粒在镍基合金纳米流体微量润滑磨削界面摩擦学机制的分子动力学研究[J]. 中国机械工程, 2024, 35(03): 445-456.
[2]	张立峰, 张晓光. 微量润滑变角度高速铣削碳纤维增强复合材料的加工性能与材料去除机理[J]. 中国机械工程, 2023, 34(21): 2622-2628.
[3]	关集俱, 高超, 徐正亚, 丁云鹏, 李特, 许雪峰. 多壁碳纳米管/油酸复合物纳米流体车削GCr15钢的性能研究[J]. 中国机械工程, 2022, 33(18): 2205-2214，2226.
[4]	彭锐涛, 彭兴, 童佳威, 赵林峰, 陈美良, 贺湘波. 水基混合纳米流体对内冷却磨削性能的影响[J]. 中国机械工程, 2021, 32(13): 1591-1599.
[5]	王晓铭1;张建超1;王绪平2;张彦彬2;罗亮3;赵伟4;刘波5;聂晓霖6;李长河1. 不同冷却工况下的磨削钛合金温度场模型及验证[J]. 中国机械工程, 2021, 32(05): 572-578,586.
[6]	陈威, 黎源源, 林俊. 凹槽微通道铜-水纳米流体传热与流动分析[J]. 中国机械工程, 2014, 25(17): 2277-2282.
[7]	凌智勇;丁建宁;杨继昌;范真;刘勇. 铜纳米流体的制备及微流动特性研究[J]. J4, 2007, 18(23): 0-2859.

外流体基液类型对纳米流体同轴静电雾化切削的影响研究

Study on Influences of Base Fluid Type of External Fluid on Nanofluid Coaxial Electrostatic Atomization Cutting

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 7

编辑推荐

Metrics