我国中小企业数字化转型的模式与对策

doi:10.3969/j.issn.1004-132X.2023.14.013

中国机械工程 ›› 2023, Vol. 34 ›› Issue (14): 1756-1763.DOI: 10.3969/j.issn.1004-132X.2023.14.013

我国中小企业数字化转型的模式与对策

王柏村1,2;朱凯凌1;薛塬3;白洁1,2;臧冀原3;谢海波1,2;杨华勇1,2

1.浙江大学机械工程学院，杭州，310027
2.浙江大学高端装备研究院，杭州，311106
3.中国工程院战略咨询中心，北京，100088

出版日期:2023-07-25 发布日期:2023-07-31
通讯作者: 薛塬（通信作者），男，1990年生，博士后研究人员。研究方向为智能制造、产业基础。E-mail:xy@cae.cn。
作者简介:王柏村，男，1990年生，研究员、博士研究生导师。研究方向为智能制造、人机协作、数字孪生。发表论文50余篇。E-mail:baicunw@zju.edu.cn。
基金资助:
中国工程院战略研究与咨询项目(2022-XZ-41)；国家自然科学基金(52205542)；浙江省重点研发计划(2021C01018)；浙江省软科学研究计划(2022C35040)

Digital Transformation Mode and Strategy of SMEs in China

WANG Baicun1,2;ZHU Kailing1;XUE Yuan3;BAI Jie1,2;ZANG Jiyuan3;XIE Haibo1,2;YANG Huayong1,2

1.School of Mechanical Engineering,Zhejiang University,Hangzhou,310027
2.Institute of Advanced Machines,Zhejiang University,Hangzhou,311106
3.Center for Strategic Studies,Chinese Academy of Engineering,Beijing,100088

Online:2023-07-25 Published:2023-07-31

摘要/Abstract

摘要： 推动中小企业数字化转型对我国制造业的全面提质增效具有重大意义。中小企业在数字化转型中存在成本过高、路径模糊、人才短缺等问题，且缺少数字化转型的分析框架与参考范式,因此构建了中小企业数字化转型的分析框架，明确了实现数字化转型关键因素，通过案例研究归纳提出了中小企业数字化转型的四类基本路径模式。基于上述研究，为我国中小企业的数字化转型提出针对性对策建议，以期推动中小企业数字化、智能化发展。

关键词: 中小企业, 数字化转型, 智能制造, 发展模式

Abstract: Promoting the digital transformation of SMEs was of great significance for Chinas manufacturing industries to improve quality and increase efficiency. SMEs were facing problems in digital transformation, such as high cost, fuzzy path, talent shortage, and lacking analytical framework and reference paradigm for digital transformation. The key factors to achieve digital transformation were clarified by building an analytical framework for SMEs digital transformation herein. Through case studies, 4 basic path models of digital transformation of SMEs were summarized and proposed. Based on the above researches, targeted suggestions were proposed for SMEs digital transformation in China, so as to promote the digital and intelligent development of SMEs.

Key words: small and medium-sized enterpris(SME), digital transformation, intelligent manufacturing, development mode

中图分类号:

TP399

王柏村, 朱凯凌, 薛塬, 白洁, 臧冀原, 谢海波, 杨华勇, . 我国中小企业数字化转型的模式与对策[J]. 中国机械工程, 2023, 34(14): 1756-1763.

WANG Baicun, ZHU Kailing, XUE Yuan, BAI Jie, ZANG Jiyuan, XIE Haibo, YANG Huayong, . Digital Transformation Mode and Strategy of SMEs in China[J]. China Mechanical Engineering, 2023, 34(14): 1756-1763.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2023.14.013

http://www.cmemo.org.cn/CN/Y2023/V34/I14/1756

参考文献

［1］周济, 李培根. 智能制造导论［M］.北京:高等教育出版社，2021.
ZHOU Ji, LI Peigen. Introduction to Intelligent Manufacturing［M］. Beijing:Higher Education Press,2021.
［2］周济,李培根,周艳红，等.走向新一代智能制造［J］. Engineering, 2018,4(1):28-47.
ZHOU Ji, LI Peigen, ZHOU Yanhong, et al. Towards the New Generation of Intelligent Manufacturing［J］.Engineering, 2018,4 (1):28-47.
［3］黄翔.激活中小企业动能促进国民经济发展［J］.中国商界,2022(12):154-157.
HUANG Xiang. Activating the Kinetic Energy of Small and Medium Enterprises to Promote National Economic Development［J］. China Business Journal, 2022 (12):154-157.
［4］吕程成.中小企业数字化转型现状、影响因素及对策［J］.企业科技与发展,2022(3):20-22.
LYU Chengcheng. Current Situation, Influencing Factors and Countermeasures of Digital Transformation of SMEs［J］. Enterprise Science and Technology and Development,2022 (3):20-22.
［5］REISCHAUER G. Industry 4.0 as Policy-driven Discourse to Institutionalize Innovation Systems in Manufacturing［J］. Technological Forecasting and Social Change,2018, 132:26-33.
［6］DUTTA G, KUMAR R, SINDHWANI R, et al. Digital Transformation Priorities of Indias Discrete Manufacturing SMEs—a Conceptual Study in Perspective of Industry 4.0［J］. Competitiveness Review:an International Business Journal, 2020, 30(3):289-314.
［7］WON J Y, PARK M J. Smart Factory Adoption in Small and Medium-sized Enterprises:Empirical Evidence of Manufacturing Industry in Korea［J］. Technological Forecasting and Social Change,2020,157:120117.
［8］GARZONI A, DE TURI I, SECUNDO G, et al. Fostering Digital Transformation of SMEs:a Four Levels Approach［J］. Management Decision, 2020, 58(8):1543-1562.
［9］BATTISTONI E, GITTO S, MURGIA G, et al. Adoption Paths of Digital Transformation in Manufacturing SME［J］. International Journal of Production Economics, 2023, 255:108675.
［10］KRAFT C, LINDEQUE J P, PETER M K. The Digital Transformation of Swiss Small and Medium-sized Enterprises:Insights from Digital Tool Adoption［J］. Journal of Strategy and Management, 2022, 15(3):468-494.
［11］PELLETIER C, CLOUTIER L M. Conceptualising Digital Transformation in SMEs:an Ecosystemic Perspective［J］. Journal of Small Business and Enterprise Development, 2019, 26(6/7):855-876.
［12］张美玲,王姗姗.数字经济驱动安徽省制造业转型升级的策略研究［J］.投资与创业,2022,33(8):32-34.
ZHANG Meiling, WANG Shanshan. A Strategic Study on the Transformation and Upgrading of Anhui Provinces Manufacturing Industry Driven by the Digital Economy［J］. Investment and Entrepreneurship,2022,33 (8):32-34.
［13］汤长安,张丽家.数字经济下江苏制造业转型升级现状分析及对策研究［J］.江苏理工学院学报,2022,28(1):47-54.
TANG Changan, ZHANG Lijia. Analysis of the Current Situation and Countermeasures for the Transformation and Upgrading of Jiangsus Manufacturing Industry under the Digital Economy［J］. Journal of Jiangsu Institute of Technology,2022,28(1):47-54.
［14］李新宇,李昭甫,高亮.离散制造行业数字化转型与智能化升级路径研究［J］.中国工程科学,2022,24(2):64-74.
LI Xinyu, LI Zhaofu, GAO Liang. Research on Digital Transformation and Intelligent Upgrading Path of Discrete Manufacturing Industry［J］. China Engineering Science, 2022, 24 (2):64-74.
［15］刘涛,张夏恒.我国中小企业数字化转型现状、问题及对策［J］.贵州社会科学,2021(2):148-155.
LIU Tao, ZHANG Xiaheng. Current Situation, Problems and Countermeasures of Digital Transformation of SMEs in China［J］. Guizhou Social Sciences,2021 (2):148-155.
［16］周适.中小企业发展面临的趋势、问题与支持战略研究［J］. 宏观经济研究,2022(7):163-175.
ZHOU Shi. Research on Trends, Issues, and Support Strategies for the Development of Small and Medium sized Enterprises［J］. Macroeconomic Research,2022 (7):163-175.
［17］李勇坚.中小企业数字化转型：理论逻辑、现实困境和国际经验［J］.人民论坛·学术前沿,2022(18):37-51.
LI Yongjian. Small and Medium-sized Enterprises Digital Transformation:Theoretical Logic, Practical Difficulties and International Experience［J］. Peoples Forum · Academic Frontier,2022 (18):37-51.
［18］王柏村,陶飞,方续东，等.智能制造——比较性综述与研究进展［J］. Engineering,2021,7(6):80-122.
WANG Baicun, TAO Fei, FANG Xudong, et al. Intelligent Manufacturing:Comparative Review and Research Progress［J］. Engineering,2021,7(6):80-122.
［19］杨赓,周慧颖,王柏村.数字孪生驱动的智能人机协作：理论、技术与应用［J］.机械工程学报,2022,58(18):279-291.
YANG Geng, ZHOU Huiying, WANG Baicun. Intelligent Human-Machine Collaboration Driven by Digital Twins:Theory, Technology, and Application［J］. Journal of Mechanical Engineering,2022,58(18):279-291.
［20］陈烨. 中小企业数字化转型研究［D］.成都:四川大学, 2021.
CHEN Ye. Research on Digital Transformation of SMEs［D］. Chendu:Sichuan University,2021.
［21］陈国权,王婧懿,林燕玲.组织数字化转型的过程模型及企业案例研究［J］.管理评论,2021,33(11):28-42.
CHEN Guoquan, WANG Jingyi, LIN Yanling. Process Model of Organizational Digital Transformation and Enterprise Case Study［J］. Management Review, 2021, 33(11):28-42.

[1]	杨晓楠, 房浩楠, 李建国, 薛庆. 智能制造中的人-信息-物理系统协同的人因工程[J]. 中国机械工程, 2023, 34(14): 1710-1722,1740.
[2]	李东阳, 袁东风, 张海霞, 郑安竹, 狄子钧, 梁道君, . 云边端协同的机床刀具故障智能诊断系统研究[J]. 中国机械工程, 2023, 34(05): 584-594.
[3]	齐二石, 霍艳芳, 刘洪伟. 面向智能制造的工业工程和精益管理[J]. 中国机械工程, 2022, 33(21): 2521-2530.
[4]	王梁1;安兴运2;张雪琴2;王义林1;张宜生1. 双机械手变速协同输送控制策略研究及应用[J]. 中国机械工程, 2020, 31(16): 1985-1990.
[5]	宋庭新, 李轲. 基于OPC UA的智能制造车间数据通信技术及应用[J]. 中国机械工程, 2020, 31(14): 1693-1699.
[6]	李晓英, 周大涛. [数据驱动的产品设计]面向智能制造服务的产品设计需求信息可视化方法[J]. 中国机械工程, 2020, 31(07): 871-881.
[7]	陈勇, 陈燚, 裴植, 王成. [数字孪生驱动的智能制造]基于文献计量的数字孪生研究进展分析[J]. 中国机械工程, 2020, 31(07): 797-807.
[8]	李浩, 王昊琪, 程颖, 陶飞, 郝兵, 王新昌, 纪杨建, 宋文燕, 杜文辽, 文笑雨, 巩晓赟, 李客, 张映锋, 罗国富, 李奇峰. [数据驱动的智能服务]数据驱动的复杂产品智能服务技术与应用[J]. 中国机械工程, 2020, 31(07): 757-772.
[9]	张健民, 单旭沂. [工程应用]热轧产线智能制造技术应用研究——宝钢1580热轧示范产线[J]. 中国机械工程, 2020, 31(02): 246-251.
[10]	史彦军, 韩俏梅, 沈卫明, WANG Lihui, WANG Xianbin. [工程应用]智能制造场景的5G应用展望[J]. 中国机械工程, 2020, 31(02): 227-236.
[11]	李杰, SINGH Jaskaran, AZAMFAR Moslem, 孙可意. [制造前沿]工业人工智能——工业应用中的人工智能系统框架[J]. 中国机械工程, 2020, 31(01): 37-48.
[12]	刘强, . [制造前沿]智能制造理论体系架构研究[J]. 中国机械工程, 2020, 31(01): 24-36.
[13]	柳百成, . [制造前沿]创新·强基·智能——建设制造强国[J]. 中国机械工程, 2020, 31(01): 13-18.
[14]	刘敏洋1，2;黄艳群1;张大卫1. 基于绩效激励机制的数控机床人机交互系统创新设计[J]. 中国机械工程, 2019, 30(21): 2554-2559.
[15]	姚锡凡, 雷毅, 葛动元, 叶晶. [学科发展]驱动制造业从“互联网+”走向“人工智能+”的大数据之道[J]. 中国机械工程, 2019, 30(02): 134-142.

我国中小企业数字化转型的模式与对策

Digital Transformation Mode and Strategy of SMEs in China

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics