考虑冷却能耗的干切机床效率分析及评价模型

doi:10.3969/j.issn.1004-132X.2023.19.008

摘要/Abstract

摘要： 为研究机床用于维持热平衡的冷却能耗，更准确地揭示机床能效提升潜力，对干切机床及其冷却系统进行了分析，提出了机床效率评价指标，建立了综合考虑材料去除能耗和冷却能耗的效率评价模型，并以高速干切滚齿加工为例，验证了该模型的可行性与可靠性。研究结果表明，高速干切滚齿机床冷却设备的效率均在30%以下，且损失率高；为提高机床能效，需降低空气过滤器和空气压缩站的损失，提高空气压缩站和液压站的效率。该研究可为干切机床精密绿色运行的评价与节能优化提供理论支持。

关键词: 效率, 冷却能耗, 干切机床, 评价模型, 绿色制造

Abstract: To study the cooling energy consumption used to keep the heat balance of machine tools and to more accurately reveal the potential in energy efficiency improvements for machine tools， the exergy analysis of dry-cutting machine tools and their cooling systems was analyzed， and exergy efficiency indicators of machine tools were proposed. An exergy efficiency evaluation model of machine tools was established considering the energy consumption for material removal and cooling， and the feasibility and reliability of this model were verified with the case study of high-speed dry gear hobbing. The results show that exergy efficiencies of all the cooling devices for high-speed dry gear hobbing machine tools are below 30% and the exergy losses are high. In order to improve the energy efficiency of machine tools， the exergy losses of the air filters and the air compression stations should be reduced, the exergy efficiency of the air compression stations and the hydraulic stations should be increased. This paper may provide theoretical support for the evaluation and energy-saving optimization of the precision green operations for dry-cutting machine tools.

Key words: , exergy efficiency, cooling energy consumption, dry-cutting machine tool, evaluation model, green manufacturing.

中图分类号:

TH16

王倩玥, 曹华军, 林江海, 赖科旭, 李本杰, 葛威威. 考虑冷却能耗的干切机床效率分析及评价模型[J]. 中国机械工程, 2023, 34(19): 2333-2342.

WANG Qianyue, CAO Huajun, LIN Jianghai, LAI Kexu, LI Benjie, GE Weiwei. Exergy Efficiency Analysis and Evaluation Model of Dry-cutting Machine Tools Considering Cooling Energy Consumption[J]. China Mechanical Engineering, 2023, 34(19): 2333-2342.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2023.19.008

http://www.cmemo.org.cn/CN/Y2023/V34/I19/2333

参考文献

［1］曹华军，李洪丞，曾丹，等. 绿色制造研究现状及未来发展策略［J］. 中国机械工程， 2020， 31（2）：135-144.
CAO Huajun， LI Hongcheng， ZENG Dan， et al. The State-of-art and Future Development Strategies of Green Manufacturing［J］. China Mechanical Engineering， 2020， 31（2）：135-144.
［2］刘培基，刘飞，王旭，等. 绿色制造的理论与技术体系及其新框架［J］. 机械工程学报， 2021， 57（19）：165-179.
LIU Peiji， LIU Fei， WANG Xu， et al. The Theory and Technology System of Green Manufacturing and Their New Frameworks［J］. Journal of Mechanical Engineering， 2021， 57（19）：165-179.
［3］刘飞，刘培基，李聪波，等. 制造系统能量效率研究的现状及难点问题［J］. 机械工程学报， 2017， 53（5）：1-11.
LIU Fei， LIU Peiji， LI Congbo， et al. The Statue and Difficult Problems of Research on Energy Efficiency of Manufacturing Systems［J］. Journal of Mechanical Engineering， 2017， 53（5）：1-11.
［4］OH N S， WOO W S， LEE CM. A Study on the Machining Characteristics and Energy Efficiency of Ti-6Al-4V in Laser-assisted Trochoidal Milling［J］. International Journal of Precision Engineering and Manufacturing—Green Technology， 2018， 5（1）：37-45.
［5］LIU Shuang， LIU Fei， HU Shaohua et al. Energy Survey of Machine Tools：Separating Power Information of the Main Transmission System during Machining Process［J］. Journal of Advanced Mechanical Design Systems and Manufacturing， 2012， 6（4）：445-455.
［6］NITECH S， KULDIP S S. A Systematic Literature Review on Machine Tool Energy Consumption［J］. Journal of Cleaner Production， 2020， 275：123-125.
［7］KARA S， LI W. Unit Process Energy Consumption Models for Material Removal Processes［J］. CIRP Annals， 2011， 60（1）：37-40.
［8］BALOGUN V A， EDEM I F， ADEKUNLE A A， et al. Specific Energy Based Evaluation of Machining Efficiency［J］. Journal of Cleaner Production， 2016， 116（10）：187-197.
［9］LIU Peiji， TUO Junbo， LIU Fei et al. A Novel Method for Energy Efficiency Evaluation to Support Efficient Machine Tool Selection［J］. Journal of Cleaner Production， 2018， 191：57-66.
［10］CAI Wei， LIU Fei， HU Shaohua. An Analytical Investigation on Energy Efficiency of High-speed Dry-cutting CNC Hobbing Machines［J］. International Journal of Sustainable Engineering， 2018， 11（6）：412-419.
［11］赵刚，王强，阮丹，等. 基于工艺参数响应曲面的干式铣削机床能效分析［J］. 中国机械工程， 2016， 27（21）：2944-2948.
ZHAO Gang， WANG Qiang， RUAN Dan et al. Analysis of Power Efficiency for Dry Milling Based on Response Surface of Machining Parameters［J］. China Mechanical Engineering， 2016， 27（21）：2944-2948.
［12］倪恒欣，阎春平，孙菡，等. 高速干切滚齿机床能耗分布特性及其预测模型［J］. 中国机械工程， 2022， 33（7）：842-851.
NI Hengxin， YAN Chunping， SUN Han et al. Energy Consumption Distribution Characteristics and Prediction Model of High-speed Dry Gear Hobbing Machine［J］. China Mechanical Engineering， 2022， 33（7）：842-851.
［13］王秋莲. 机械加工系统能量效率评价研究［D］. 重庆：重庆大学， 2015.
WANG Qiulian. Energy Efficiency Evaluating of the Mechanical Machining System［D］. Chongqing：Chongqing University， 2015.
［14］RAMESH R， MANNAN M A， POO A N. Error Compensation in Machine Tools—a Review Part Ⅱ：Thermal Errors［J］. International Journal Machine Tools & Manufacture， 2000， 40：1257-1284.
［15］YANG Jun， ZHANG Dongsheng， MEI Xuesong， et al. Thermal Error Simulation and Compensation in a Jig-boring Machine Equipped with a Dual-drive Servo Feed System［J］. Proceeding of the Institution Mechanical Engineers， Part B：Journal of Engineering Manufacture， 2015， 229（S1）：43-63.
［16］JUNGE F. Increase in Energy Efficiency of Industrial Production Processes through Thermal Crosslinking of Cutting-machine Tools and Cleaning Machines by Heat-pump Technology［C］∥12th IEA Heat Pump Conference. Rotterdam, 2017.
［17］CENGEL Y A， BOLES M A. Thermodynamics：an Engineering Approach（7th ed ）［M］. New York：McGraw-Hill Education. 2010.
［18］SHIN J， YOON S， KIM J K. Application of Exergy Analysis for Improving Energy Efficiency of Natural Gas Liquids Recovery Rrocesses［J］. Applied Thermal Engineering， 2015， 75：967-977.
［19］KOCH C， CZIESLA F， TSATSARONIS G. Optimization of Combined Cycle Power Plants Using Evolutionary Algorithms［J］. Chemical Engineering and Processing-Process Intensification， 2007， 46：1151-1159.
［20］李林. 数控加工过程能耗优化及损失评价方法研究［D］. 哈尔滨：哈尔滨工业大学， 2016.
LI Lin. Energy Consumption Optimization and Exergy Loss Assessment Method for CNC Machining Process［D］. Harbin. Harbin Institute of Technology， 2016.
［21］李本杰. 高速干切滚齿机床主轴系统效率模型及协调优化方法研究［D］. 重庆：重庆大学， 2019.
LI Benjie. Research on Exergy Efficiency Model and Coordinative Optimization Method of Spindle System of High-Speed Dry Hobbing Machine Tool［D］. Chongqing：Chongqing University， 2019.
［22］ZHU Libin， CAO Huajun， HUANG Haihong， et al. Exergy Analysis and Multi-Objective Optimization of Air Cooling System for Dry Machining［J］. International Journal of Advanced Manufacturing Technology， 2017， 93（9/12）：3175-3188.
［23］LI Benjie， CAO Huajun， HON B， et al. Exergy-Based Energy Efficiency Evaluation Model for Machine Tools Considering Thermal Stability［J］. International Journal of Precision Engineering and Manufacturing—Green Technology， 2021， 8（2）：423-434.
［24］MA Chi， YANG Jun， ZHAO Liang， et al. Simulation and Experimental Study on the Thermally Induced Deformations of High-Speed Spindle System［J］. Applied Thermal Engineering， 2015， 86：251-268.
［25］LI Yang， ZHAO Wanhua， WU Wenwen， et al. Thermal Error Modeling of the Spindle Based on Multiple Variables for the Precision Machine Tool［J］. International Journal of Advanced Manufacturing Technology， 2014， 72：1415-1427.
［26］CHEIN C H， JANG J Y. 3-D Numerical and Experimental Analysis of a Built-in Motorized High-Speed Spindle with Helical Water Cooling Channel［J］. Applied Thermal Engineering， 2008， 28：2327-2336.
［27］LIU Peiji， LIU Fei， QIU Hang. A Novel Approach for Acquiring the Real-time Energy Efficiency of Machine Tools［J］. Energy， 2017， 121：524-532.
［28］YANG Kun， ZHU Neng， DING Yan， et al. Exergy and Exergoeconomic Analyses of a Combined Cooling， Heating， and Power（CCHP）System Based on Dual-fuel of Biomass and Natural Gas［J］. Journal of Cleaner Production， 2019， 206：893-906.
［29］ZHOU Lirong， LI Jianfeng， LI Fangyi， et al. Energy Consumption Model and Energy Efficiency of Machine Tools：a Comprehensive Literature Review［J］. Journal of Cleaner Production， 2016， 112：372-3734.
［30］KOLAR M， VYROUBAL J， SMOLIK J. Analytical Approach to Establishment of Predictive Models of Power Consumption of Machine Tools Auxiliary Units［J］. Journal of Cleaner Production， 2016， 137：361-369.
［31］KAUSHIK S C， MANIKANDAN S， HANS R. Energy and Exergy Analysis of Thermoelectric Heat Pump System［J］. International Journal of Heat and Mass Transfer， 2015， 86：843-852.
［32］INCROPERA F P， DEWITT D P， BERGMAN T L， et al. Fundamentals of Heat and Mass Transfer（6th ed）［M］. New York：John. Wiley & Sons Inc., 2007.
［33］ATMACA A， YUMRUTAS R. Thermodynamic and Exergoeconomic Analysis of a Cement Plant：Part Ⅱ—Application［J］. Energy Conversion and Management， 2014， 79：799-808.
［34］YANG Xiao， CAO Huajun， CHEN Yongpeng， et al. An Analytical Model of Chip Heat-carrying Capacity for High-speed Dry Hobbing Based on 3D Chip Geometry［J］. International Journal of Precision Engineering and Manufacturing， 2017， 18（2）：245-256.
［35］YANG Xiao， CAO Huajun， LI Benjie， et al. A Thermal Energy Balance Optimization Model of Cutting Space Enabling Environmentally Benign Dry Hobbing［J］. Journal of Cleaner Production， 2018， 172：2323-2335.

[1]	孙永国, 金欣, 薛冬, 单建平, 石晓春. 基于NSGA-Ⅱ的滑油泵叶轮结构优化设计[J]. 中国机械工程, 2024, 35(03): 559-569.
[2]	魏冰阳, 古德万, 王永强, 杨建军, . 高减比准双曲面齿轮摩擦功耗分析与效率试验[J]. 中国机械工程, 2023, 34(13): 1525-1532.
[3]	沈凡, 赵刚, 陈燕才, 熊雯. 高温雾化降尘效率关键影响参数研究及优化[J]. 中国机械工程, 2023, 34(07): 789-795，802.
[4]	宿月文;郭彩霞. 摆线传动接触载荷与效率的关联模式及试验验证[J]. 中国机械工程, 2021, 32(05): 556-564.
[5]	程贤福1;周健1;肖人彬2;刘俊杰1;游敏华1. 面向绿色制造的产品模块化设计研究综述[J]. 中国机械工程, 2020, 31(21): 2612-2625.
[6]	詹欣隆1;张超勇1;孟磊磊2;洪辉1. 基于改进引力搜索算法的铣削加工参数低碳建模及优化[J]. 中国机械工程, 2020, 31(12): 1481-1491.
[7]	鄢佳豪;曹华军;陈二恒;宋丹丹;朱林全. 压铸单元能效在线监测方法及监测系统[J]. 中国机械工程, 2020, 31(05): 586-594.
[8]	曹华军, 李洪丞, 曾丹, 葛威威. [学科发展]绿色制造研究现状及未来发展策略[J]. 中国机械工程, 2020, 31(02): 135-144.
[9]	刘厚根;张攀. ZNR2.4罗茨机械增压器性能试验研究[J]. 中国机械工程, 2019, 30(23): 2843-2848.
[10]	杨纪楠;许立忠. 双级正弦活齿传动系统效率计算与实验研究[J]. 中国机械工程, 2019, 30(21): 2577-2582,2589.
[11]	张正;毕仁贵;严灿. 一种椭球凸集参数域结构的高效减基优化方法[J]. 中国机械工程, 2019, 30(17): 2039-2043.
[12]	韩晓芹1,2;宋永锋1;刘雨1;李雄兵1. 基于超声无损评价的表面粗糙度测量方法[J]. 中国机械工程, 2019, 30(08): 883-889.
[13]	张海鸥, 黄丞, 李润声, 张华, 陈君文, 冯抗屯, 王桂兰. [绿色制造工艺和系统]高端金属零件微铸锻铣复合超短流程绿色制造方法及其能耗分析[J]. 中国机械工程, 2018, 29(21): 2553-2558.
[14]	赵晓昱, 张博明, 廉一龙, 张树仁. [绿色制造工艺和系统]复合材料电池箱真空辅助树脂灌注快速成形工艺[J]. 中国机械工程, 2018, 29(21): 2565-2570,2580.
[15]	朱胜, 周超极, 周克兵. [机械装备再制造]绿色增材再制造技术[J]. 中国机械工程, 2018, 29(21): 2590-2593,2614.