双转台五轴机床旋转轴位置无关几何误差的辨识

doi:10.3969/j.issn.1004-132X.2023.21.007

中国机械工程 ›› 2023, Vol. 34 ›› Issue (21): 2585-2591.DOI: 10.3969/j.issn.1004-132X.2023.21.007

双转台五轴机床旋转轴位置无关几何误差的辨识

梁小冰1，2，3;卢耀安1，2，3;王成勇1，2，3

1.广东工业大学机电工程学院，广州，510006
2.广东工业大学广东省微创手术器械设计与精密制造重点实验室，广州，510006
3.高性能工具全国重点实验室，广州，510006

出版日期:2023-11-10 发布日期:2023-11-29
通讯作者: 卢耀安（通信作者），男，1988年生，副教授。研究方向为数控加工技术、机床误差测量与辨识。E-mail：luyaoan@gdut.edu.cn。
作者简介:梁小冰，女，1995年生，硕士研究生。研究方向为机床误差测量与辨识。
基金资助:
广州市基础与应用基础研究项目(202201010355)；佛山市核心技术攻关项目(1920001000818)

Identification of Position-independent Geometric Errors for Rotary Axes of Five-axis Table-tilting Machine Tools

LIANG Xiaobing1，2，3;LU Yaoan1，2，3;WANG Chengyong1，2，3

1.School of Electromechanical Engineering，Guangdong University of Technology，Guangzhou，510006
2.Guangdong Provincial Key Laboratory of Minimally Invasive Surgical Instruments and
Manufacturing Technology，Guangdong University of Technology，Guangzhou，510006
3.State Key Laboratory for High Performance Tools，Guangzhou，510006

Online:2023-11-10 Published:2023-11-29

摘要/Abstract

摘要： 旋转轴的位置无关几何误差（PIGEs）是影响五轴机床加工精度的重要因素。以AC双转台五轴机床为研究对象，提出一种基于差分演化算法的旋转轴PIGEs辨识方法。首先，建立机床旋转轴PIGEs和球杆仪杆长变化的关系模型，使用已有的辨识方法获得机床旋转轴PIGEs初始解，然后定义优化目标函数，通过差分演化算法整体优化求解旋转轴PIGEs，提高旋转轴PIGEs辨识准确性。实验与仿真的结果表明提出的旋转轴PIGEs辨识方法可有效提高辨识准确性。

关键词: 位置无关几何误差, 旋转轴误差辨识, 五轴机床, 球杆仪

Abstract: PIGEs of rotary axes were the important factors that affected the machining accuracy of five-axis machine tools. Taking AC type five-axis table-tilting machine tools as an example， an identification method of PIGEs of rotary axes was proposed based on the differential evolution algorithm. Firstly， a mathematical model of PIGEs and length change of ball bar was established. The initial PIGEs may be identified by existing methods. Then， an optimization objective function was defined， and the PIGEs of the rotary axes were optimized as a whole by a differential evolution algorithm to improve the identification accuracy of the rotary axes PIGEs. The experimental and simulation results show that the proposed method may effectively improve the identification accuracy of the PIGEs of the rotary axes.

Key words: position-independent geometric error（PIGE）, identification method of rotary axes, five-axis machine tool, double ball bar

中图分类号:

TH161

梁小冰, 卢耀安, 王成勇, . 双转台五轴机床旋转轴位置无关几何误差的辨识[J]. 中国机械工程, 2023, 34(21): 2585-2591.

LIANG Xiaobing, LU Yaoan, WANG Chengyong, . Identification of Position-independent Geometric Errors for Rotary Axes of Five-axis Table-tilting Machine Tools[J]. China Mechanical Engineering, 2023, 34(21): 2585-2591.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2023.21.007

http://www.cmemo.org.cn/CN/Y2023/V34/I21/2585

参考文献

［1］YANG S H， LEE K I. Identification of 11 Position-independent Geometric Errors of a Five-axis Machine Tool Using 3D Geometric Sensitivity Analysis［J］. The International Journal of Advanced Manufacturing Technology， 2021， 113：3271-3282.
［2］LASEMI A， XUE Deyi， GU Peihua. Accurate Identification and Compensation of Geometric Errors of 5-axis CNC Machine Tools Using Double Ball Bar［J］. Measurement Science and Technology， 2016， 27（5）：055004.
［3］DING Shuang， HUANG Xiaodiao， YU Chunjian. Novel Method for Position-independent Geometric Error Compensation of Five-axis Orthogonal Machine Tool Based on Error Motion［J］. The International Journal of Advanced Manufacturing Technology， 2016， 83（5/8）：1069-1078.
［4］XIANG Sitong， YANG Jianguo， ZHANG Yi. Using a Double Ball Bar to Identify Position-independent Geometric Errors on the Rotary Axes of Five-axis Machine Tools［J］. The International Journal of Advanced Manufacturing Technology， 2014， 70（9/12）：2071-2082.
［5］IBARAKI S， IRITANI T， MATSUSHITA T. Calibration of Location Errors of Rotary Axes on Five-axis Machine Tools by On-the-machine Measurement Using a Touch-trigger Probe［J］. International Journal of Machine Tools and Manufacture， 2012， 58：44-53.
［6］侯宏天. 双转台五轴数控机床几何误差辨识与补偿研究［D］. 兰州：兰州理工大学， 2021.
HOU Hongtian. Identification and Compensation of Geometric Errors in a Five-axis CNC Machine with Double Rotary Table［D］. Lanzhou：Lanzhou University of Technology， 2021.
［7］郭世杰，姜歌东，梅雪松，等. 转台-摆头式五轴机床几何误差测量及辨识［J］. 光学精密工程， 2018， 26（11）：2684-2694.
GUO Shijie， JIANG Gedong， MEI Xuesong， et al. Measurement and Identification of Geometric Errors for Turntable-tilting Head Type Five-axis Machine Tools［J］. Optics and Precision Engineering， 2018， 26（11）：2684-2694.
［8］张童童. 五轴机床旋转轴几何误差测量与辨识研究［D］. 长春：吉林大学， 2022.
ZHANG Tongtong. Five-axis Machine Tool Rotation Axis Geometric Error Measurement and Identification Research［D］. Changchun：Jilin University， 2022.
［9］XIANG Sitong， ALTINTAS Y. Modeling and Compensation of Volumetric Errors for Five-axis Machine Tools［J］. International Journal of Machine Tools and Manufacture， 2016， 101：65-78.
［10］WANG Hao， JIANG Xiaogeng. Geometric Error Identification of Five-axis Machine Tools Using Dual Quaternion［J］. International Journal of Mechanical Sciences， 2022， 229：107522.
［11］TSUTSUMI M， SAITO A. Identification and Compensation of Systematic Deviations Particular to 5-axis Machining Centers［J］. International Journal of Machine Tools and Manufacture， 2003， 43（8）：771-780.
［12］WANG Min， HU Jianzhong， ZAN Tao. Kinematic Error Separation on Five-axis NC Machine Tool based on Telescoping Double Ball Bar［J］. Frontiers of Mechanical Engineering， 2010， 5（4）：431-437.
［13］姚思涵. 五轴数控机床几何误差建模与测量方法研究［D］. 天津：天津工业大学， 2020.
YAO Sihan. Research on Geometric Error Modeling and Measurement of Five-axis CNC Machine Tools［D］. Tianjin：Tianjin Polytechnic University， 2020.
［14］XIA Hongjian， PENG Weichao， OUYANG Xiangbo， et al. Identification of Geometric Errors of Rotary Axis on Multi-axis Machine Tool based on Kinematic Analysis Method Using Double Ball Bar［J］. International Journal of Machine Tools and Manufacture， 2017， 122：161-175.
［15］丁青锋，尹晓宇. 差分进化算法综述［J］. 智能系统学报， 2017， 12（4）：431-442.
DING Qingfeng， YIN Xiaoyu. Review of differential Evolution Algorithms［J］. CAAI Transactions on Intelligent Systems， 2017， 12（4）：431-442.

[1]	陈光胜, 郑庆振. 一种多轴数控机床末端静刚度快速辨识方法[J]. 中国机械工程, 2017, 28(03): 322-326.
[2]	林述温, 吴城汀, 林清锋. 数控机床旋转轴误差的快速测量与辨识新方法[J]. 中国机械工程, 2014, 25(9): 1169-1174.
[3]	江磊, 李庄, 李相标, 周良明, 段昌德, 丁国富. 无限旋转C轴工作台结构的五轴机床后置转角求解[J]. 中国机械工程, 2014, 25(16): 2178-2183.
[4]	王秀山;杨建国;余永昌;邹彩虹;. 双转台五轴数控机床热误差建模、检测及补偿实验研究[J]. J4, 2009, 20(04): 0-388.
[5]	张大卫;商鹏;田延岭;贺琼义;. 五轴数控机床转动轴误差元素的球杆仪检测方法[J]. J4, 2008, 19(22): 0-2649.

双转台五轴机床旋转轴位置无关几何误差的辨识

Identification of Position-independent Geometric Errors for Rotary Axes of Five-axis Table-tilting Machine Tools

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics