复杂载荷下的核管路支架智能布置

doi:10.3969/j.issn.1004-132X.2024.02.016

中国机械工程 ›› 2024, Vol. 35 ›› Issue (02): 317-323，336.DOI: 10.3969/j.issn.1004-132X.2024.02.016

复杂载荷下的核管路支架智能布置

孙宇翔1;陈丽2;龙波2;王艳苹2;刘诗华2;贾坤1

1.西安交通大学复杂服役环境重大装备结构强度与寿命全国重点实验室，西安，710049
2.中国核电工程有限公司力学中心，北京，100840

出版日期:2024-02-25 发布日期:2024-04-12
通讯作者: 贾坤(通信作者)，男，1986年生，副教授、博士研究生导师。研究方向为核工程力学。发表论文30余篇。E-mail：kunjia@mail.xjtu.edu.cn.
作者简介:孙宇翔，男，2000年生，博士研究生。研究方向为管路智能优化。E-mail：yuxiangsun@stu.xjtu.edu.cn。
基金资助:
中核工业集团青年英才项目

Intelligent Layout for Pipeline Supports of Nuclear Power Plant under Complex Load

SUN Yuxiang1;CHEN Li2;LONG Bo2;WANG Yanping2;LIU Shihua2;JIA Kun1

1.State Key Laboratory for Strength and Vibration of Mechanical Structures,Xian Jiaotong
University,Xian,710049
2.Center of Mechanics,China Nuclear Power Engineering Co.，Ltd.,Beijing，100840

Online:2024-02-25 Published:2024-04-12

摘要/Abstract

摘要： 当前，核电管路支架布置通过人工试算反复迭代来实现，存在劳动强度大、设计周期长、成本高等缺点。借助管路有限元力学分析，提出一种基于粒子群遗传混合算法的三维空间核电管路支架智能布置方法。布置示例表明，所提方法可在管路的三维全局空间内自动布置不同功能的多个支架，在满足《压水堆核岛机械设备设计和建造规则》设计规范的同时减小了工作量。

关键词: 核电管路, 支架布置, 智能布置, 粒子群遗传混合算法

Abstract: Nowadays, the arrangement of pipeline supports for nuclear power plants is achieved by iterative manual calculations, which had many drawbacks such as high labour intensity, long design cycles, and high costs. An intelligent layout method for three-dimensional nuclear power pipeline supports was proposed based on particle swarm optimization-genetic algorithm hybrid algorithm and finite element mechanics analysis. The examples of intelligent arrangement of pipeline supports for typical nuclear pipelines show that the proposed method may automatically arrange multiple supports of different types in the global space of the pipeline to meet the Design and Construction Rules for Mechanical Equipment of Nuclear Island of Nuclear Power Plants, and greatly reduce workload.

Key words: nuclear power pipeline, pipeline support arrangement, intelligent layout, particle swarm optimization-genetic algorithm hybrid , algorithm

中图分类号:

TM623.2

孙宇翔, 陈丽, 龙波, 王艳苹, 刘诗华, 贾坤. 复杂载荷下的核管路支架智能布置[J]. 中国机械工程, 2024, 35(02): 317-323，336.

SUN Yuxiang, CHEN Li, LONG Bo, WANG Yanping, LIU Shihua, JIA Kun. Intelligent Layout for Pipeline Supports of Nuclear Power Plant under Complex Load[J]. China Mechanical Engineering, 2024, 35(02): 317-323，336.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2024.02.016

http://www.cmemo.org.cn/CN/Y2024/V35/I02/317

参考文献

［1］王新军,卢喜丰,艾红雷,等.核级高能管道系统优化分析［J］.核动力工程,2014,35(4):114-118.
WANG Xinjun, LU Xifeng, AI Honglei, et al. Optimization Analysis of Nuclear Grade High Energy Pipeline System［J］. Nuclear Power Engineering, 2014,35(4):114-118.
［2］陈敏,张周红.复杂管道应力分析中的支吊架布置方法［J］.压力容器,2009,26(3):21-25.
CHEN Min, ZHANG Zhouhong. Arrangement Method of Support and Hanger in Stress Analysis of Complex Pipeline［J］. Pressure Vessel, 2009, 26(3):21-25.
［3］白晓明,郑连纲,王新军,等.基于遗传算法的核级管道力学性能优化研究［J］.核动力工程,2017,38(S2):46-49.
BAI Xiaoming, ZHENG Liangang, WANG Xinjun,et al. Research on Mechanical Performance Optimization of Nuclear-level Pipeline Based on Genetic Algorithm［J］. Nuclear Power Engineering, 2017, 38(S2):46-49.
［4］MENDOZA F, BERNAL-AGUSTIN J L, DOMINGUEZ-NAVARRO J A. NSGA and SPEA Applied to Multi-objective Design of Power Distribution Systems［J］. IEEE Transactions on Power Systems, 2006, 21:1938-1945.
［5］GOLDBERG D E. Genetic Algorithm in Search, Optimization, and Machine Learning［M］. Hoboken:Addison Wesley Pub. Co., 1989.
［6］徐培原,刘伟.发动机外部管路系统的卡箍布局多目标优化［J］.航空发动机,2020,46(6):46-52.
XU Peiyuan, LIU Wei. Multi-objective Optimization of Clamp Layout of Engine External Piping System［J］. Aero Engine, 2020, 46(6):46-52.
［7］柳强, 焦国帅. 基于Kriging模型和NSGA-Ⅱ的航空发动机管路卡箍布局优化［J］. 智能系统学报, 2019, 14(2):281-287.
LIU Qiang, JIAO Guoshuai. Layout Optimization of Aero-engine Piping Clamps Based on Kriging Model and NSGA-Ⅱ［J］. Journal of Intelligent Systems, 2019, 14(2):281-287.
［8］刘旭东, 孙伟. 多卡箍支撑的管路系统振动特性半析建模及支撑位置优化［J］. 振动与冲击, 2021, 40(9):32-40.
LIU Xudong, SUN Wei. Semi-analytical Modeling of Vibration Characteristics of Pipeline System Supported by Multiple Clamps and Optimization of Support Position［J］. Vibration and Shock, 2021, 40(19):32-40.
［9］赵红飞,柳强. 考虑装配约束的航空发动机卡箍布局GWO优化［J］. 辽宁石油化工大学学报, 2022, 42(1):92-96.
ZHAO Hongfei, LIU Qiang. GWO Optimization of Aero-engine Clamp Layout Considering Assembly Constraints［J］. Journal of Liaoning Petrochemical University, 2022, 42(1):92-96.
［10］LIU Qiang, TANG Zhi, LIU Huijuan, et al. Integrated Optimization of Pipe Routing and Clamp Layout for Aeroengine Using Improved MOALO［J］. International Journal of Aerospace Engineering, 2021, 2021:6681322.
［11］GAO Peixin, LI Jinwu, ZHAI Jingyu, et al. A Novel Optimization Layout Method for Clamps in a Pipeline System［J］. Applied Sciences, 2020, 10(1):1-16.［12］GONG Xiaocheng, JIN Xianjing, ZHANG Yu. Research and Application of Automatic Modeling Technology for Mechanical Analysis of Nuclear Power Pipelines Based on PepS［C］∥Proceedings of the 29th International Conference on Nuclear Engineering. Beijing, 2022:V012T12A013.
［13］ZHANG Jie, WU Liangjun, HU Jiakun, et al. Research and Application of Intelligent Layout Design Algorithm for 3D Pipeline of Nuclear Power Plant［J］. Mathematical Problems in Engineering, 2022, 2022:5198724.
［14］姜圣翰,范凯,王用超,等.云计算在核级管道应力分析与优化设计中的应用研究［J］.核动力工程, 2021, 42(S2):150-153.
JIANG Shenghan, FAN Kai, WANG Yongchao, et al. Application of Cloud Computing in Stress Analysis and Optimal Design of Nuclear Grade Pipelines［J］. Nuclear Power Engineering, 2021,42 (S2):150-153.
［15］白晓明,王新军,张锐,等.智能优化算法在华龙一号核级管道布置优化中的应用［J］.核动力工程, 2019, 40(S1):41-44.
BAI Xiaoming, WANG Xinjun, ZHANG Rui, et al. Application of Intelligent Optimization Algorithm in Layout Optimization of Hua Long No.1 Nuclear Pipeline［J］. Nuclear Power Engineering, 2019, 40(S1):41-44.
［16］蒲小芬,王俭.秦山核电二期工程主管道的设计和安装［J］.核动力工程,2003(S1):185-187.
PU Xiaofen, WANG Jian. Design and Installation of the Main Pipeline of Qinshan Nuclear Power PhaseII Project［J］. Nuclear Power Engineering, 2003(S1) :185-187.
［17］AFCEN. Design and Construction Rules for Mechanical Components of PWR Nuclear Islands, RCC-M Section I:Subsection C-2002［S］. Shanghai:Shanghai Scientific and Technological Literature Press, 2010:149-151.
［18］毛开富,包广清,徐驰.基于非对称学习因子调节的粒子群优化算法［J］.计算机工程,2010,36(19):182-184.
MAO Kaifu, BAO Guangqing, XU Chi. Particle Swarm Optimization Algorithm Based on Asymmetric Learning Factor Adjustment［J］. Computer Engineering, 2010,36 (19):182-184.

复杂载荷下的核管路支架智能布置

Intelligent Layout for Pipeline Supports of Nuclear Power Plant under Complex Load

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics