狭长空间内重载调姿装配机器人的设计与研究

doi:10.3969/j.issn.1004-132X.2024.02.017

摘要/Abstract

摘要： 针对舱体类狭长空间内部待安装设备种类多、批量大、载荷重、空间余量微小、装配路径复杂、装配风险高等问题，设计了一种重载调姿装配机器人。在机器人运动学研究的基础上，建立了误差模型，并以最小包围球半径为约束条件，通过遗传算法将误差参数的辨识结果补偿到机器人控制系统。以机柜装配为例，针对空间约束条件规划工作路径，基于动力学约束能耗函数模型，以时间、冲击和能耗为优化目标，得到多目标最优轨迹。样机实验验证了误差参数辨识的有效性，减小了机器人的绝对定位误差，且多目标最优轨迹的关节总冲击小、运动平稳，实现了机柜类设备高效、平稳、可靠的安装。

关键词: 装配机器人, 运动学建模, 多目标优化, 误差补偿

Abstract: In response to the issues of a wide variety of equipment, large batches, heavy payloads, limited space, complex assembly paths, and high assembly risks inside the cabin, a heavy-duty positioning and assembly robot was designed. Based on the study of the robot kinematics, an error model was established. With the radius of minimum bounding sphere as the constraint condition, the identification results of error parameters by genetic algorithm were compensated into the robot control system. Taking cabinet assembly as an example, a working path was planned based on spatial constraint conditions. By a dynamic constraint energy consumption function model, multi-objective optimal trajectories were obtained with time, impact, and energy consumption as optimization objectives. Prototype testing verified the effectiveness of the error parameter identification, which reduces the absolute positioning errors of the robot. Moreover, the multi-objective optimal trajectory has a small total joint impact and smooth motion, achieving efficient, smooth, and reliable installation of cabinet-type equipment.

Key words: assembly robot, kinematics modeling, multi-objective optimization, error compensation

中图分类号:

TH69

刘毅, 易旺民, 姚建涛, 王兴达, 余鹏, 赵永生. 狭长空间内重载调姿装配机器人的设计与研究[J]. 中国机械工程, 2024, 35(02): 324-336.

LIU Yi, YI Wangmin, YAO Jiantao, WANG Xingda, YU Peng, ZHAO Yongshen. Design and Research of Heavy-duty Posture-adjusting Assembly Robots in Narrow Space[J]. China Mechanical Engineering, 2024, 35(02): 324-336.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2024.02.017

http://www.cmemo.org.cn/CN/Y2024/V35/I02/324

参考文献

［1］彭涛, 李世其, 徐迟, 等. 面向航天器舱体的智能装配系统研究［J］. 中国机械工程, 2010, 21(5):545-549.
PENG Tao, LI Shiqi, XU Chi, et al. Research on Intelligent Assembly System for Spacecraft Cabin［J］. China Mechanical Engineering, 2010, 21(5):545-549.
［2］王皓, 陈根良. 机器人型装备在航空装配中的应用现状与研究展望［J］. 航空学报, 2022，43(5):626128.
WANG Hao, CHEN Genliang. Research Progress and Perspective of Robotic Equipment Applied in Aviation Assembly［J］. Acta Aeronautica et Astronautica Sinica, 2022,43(5):626128.
［3］DAY C P. Robotics in Industry—Their Role in Intelligent Manufacturing［J］. Engineering, 2018, 4(4):440-445.
［4］CHEN Jiaxi, LI Junmin, ZHAO Wenjie. T-S Fuzzy Model-based Adaptive Repetitive Consensus Control for Multi-agent Systems with Imprecise Communication Topology Structure［J］. International Journal of Systems Science, 2019, 50(8):1568-1579.
［5］赵璐, 肖正懿, 黄垒, 等. 航天器大型密封舱垂直进舱工装设计［J］. 航天器环境工程, 2011, 28(6):620-624.
ZHAO Lu, XIAO Zhengyi, HUANG Lei, et al. Spacecraft Large Sealed Module Vertical Entry Tooling Design［J］. Spacecraft Environment Engineering, 2011, 28(6):620-624.
［6］孙刚, 刘广通, 郭涛, 等. 航天器总装过程中基于并联调姿平台的太阳翼数字化对接技术［J］. 航空制造技术, 2015(21):102-106.
SUN Gang, LIU Guangtong, GUO Tao, et al. Digital Docking Technology of the Solar Array Based on the Parallel Mechanism in the Process of Spacecraft Assembly［J］. Aeronautical Manufacturing Technology, 2015(21):102-106.
［7］高丽丽, 李士宁, 吴冬, 等. 运载火箭壁板机器人自动钻铆技术研究［J］. 机械工程与自动化, 2020(6):124-126.
GAO Lili, LI Shining, WU Dong, et al. Research on Automatic Drilling and Riveting Technology of Launch Vehicle Wall Plate Robot［J］. Mechanical Engineering & Automation, 2020(6):124-126.
［8］孟少华, 胡瑞钦, 张立建, 等. 一种基于机器人的航天器大型部件自主装配方法［J］. 机器人, 2018, 40(1):81-88.
MENG Shaohua, HU Ruiqin, ZHANG Lijian, et al. A Method of Autonomous Assembly of Large Spacecraft Components Using Robot［J］. Robot, 2018, 40(1):81-88.
［9］张峤, 刘冬雨, 罗超, 等. 密封舱内漂浮小球运动规律的数值模拟研究［J］. 航天器环境工程, 2018, 35(4):323-329.
ZHANG Qiao, LIU Dongyu, LUO Chao, et al. Numerical Analysis of the Movement Characteristics of Floating Balls in a Pressurized Cabin［J］. Spacecraft Environment Engineering, 2018, 35(4):323-329.
［10］邱铁成, 张满, 张立伟, 等. 机器人在卫星舱板装配中的应用研究［J］. 航天器环境工程, 2012, 29(5):579-585.
QIU Tiecheng, ZHANG Man, ZHANG Liwei, et al. Study on the Application of Robot in Satellite Hatch Assembly［J］. Spacecraft Environment Engineering, 2012, 29(5):579-585.
［11］张立建, 胡瑞钦, 易旺民. 基于六维力传感器的工业机器人末端负载受力感知研究［J］. 自动化学报, 2017, 43(3):439-447.
ZHANG Lijian, HU Ruiqin, YI Wangmin. Research on Force Sensing for the End-load of Industrial Robot Based on a 6-axis Force/Torque Sensor［J］. Acta Automatica Sinica, 2017, 43(3):439-447.
［12］胡瑞钦, 张立建, 孟少华, 等. 基于柔顺控制的航天器大部件机器人装配技术［J］. 机械工程学报, 2018, 54(11):85-93.
HU Ruiqin，ZHANG Lijian，MENG Shaohua, et al. Robotic Assembly Technology for Heavy Component of Spacecraft Based on Compliance Control［J］. Journal of Mechanical Engineering, 2018, 54(11):85-93.
［13］胡瑞钦, 隆昌宇, 张立建. 视觉与力觉结合的卫星部件机器人装配［J］. 光学精密工程, 2018, 26(10):2504-2515.
HU Ruiqin，LONG Changyu, ZHANG Lijian. Robotic Assembly Technology for Satellite Components Based on Visual and Force Information［J］. Optics and Precision Engineering, 2018, 26(10):2504-2515.
［14］常家辉, 祁萌, 李良琦. 装配机器人在国外国防领域的应用进展［J］. 国防制造技术, 2018(4):10-19.
CHANG Jiahui, QI Meng, LI Liangqi. Progress in the Application of Assembly Robot in Foreign Defense Field［J］. Defense Manufacturing Technology, 2018(4):10-19.
［15］布仁, 孙刚, 胡瑞钦, 等. 航天器机械臂柔性力控辅助装配方法［J］. 航天器环境工程, 2014, 31(4):430-435.
BU Ren, SUN Gang, HU Ruiqin, et al. Flexible Force Control on Robot Arm for Spacecraft Assembly［J］. Spacecraft Environment Engineering, 2014, 31(4):430-435.
［16］王杰鹏, 谢永权, 宋涛, 等. 力觉交互控制的机械臂精密位姿控制技术［J］. 机械设计与研究, 2019, 35(4):47-52.
WANG Jiepeng, XIE Yongqan, SONG Tao, et al. A Precise Robot Control Technology for Satellite Assembly Based on Force Interaction Control［J］. Machine Design and Research, 2019, 35(4):47-52.
［17］刘仁伟, 徐晓辉, 谢永权, 等. 基于机械臂辅助的卫星柔顺装配技术研究［J］. 机电工程, 2020, 37(5):532-536.
LIU Renwei, XU Xiaohui, XIE Yongquan, et al. Compliant Assembly Technology of Satellite Assisted by Robot Arm［J］. Journal of Mechanical ＆ Electrical Engineering, 2020, 37(5):532-536.
［18］TAO Bo, ZHAO Xingwei, DING Han. Mobile-robotic Machining for Large Complex Components:a Review Study［J］. Science China—Technological Sciences, 2019, 62(8):1388-1400.
［19］CEN Lejun, MELKOTE S N, CASTLE J, et al. A Wireless Force-sensing and Model-based Approach for Enhancement of Machining Accuracy in Robotic Milling［J］. IEEE-ASME Transactions on Mechatronics, 2016, 21(5):2227-2235.
［20］吴锦辉, 陶友瑞. 工业机器人定位精度可靠性研究现状综述［J］. 中国机械工程, 2020, 31(18):2180-2188.
WU Jinhu, TAO Yourui. Review on Research Status of Positioning Accuracy Reliability of Industrial Robots［J］. China Mechanical Engineering,2020, 31(18):2180-2188.
［21］田启华, 明文豪, 文小勇, 等. 基于NSGA-Ⅱ的产品开发任务调度多目标优化［J］. 中国机械工程, 2018, 29(22):2758-2766.
TIAN Qihua, MING Wenhao, WEN Xiaoyong, et al. Multi-objective Optimization Method of Product Development Task Scheduling Based on NSGA-Ⅱ［J］. China Mechanical Engineering, 2018, 29(22):2758-2766.

[1]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[2]	胡福清, 孙江宏, 孙英杰, 孙雨彤, 马超, 周福强, . 基于新型旋转直线往复机构的切片机设计分析及参数优化[J]. 中国机械工程, 2024, 35(04): 614-623，635.
[3]	魏书鹏, 唐红涛, 李西兴, 杨冠宇, 张健. 考虑双资源约束的柔性机械加工车间逆调度问题研究[J]. 中国机械工程, 2024, 35(03): 457-471.
[4]	荣誉, 陈刚, 豆天赐, . 一种多指标综合最优的抗冲击轨迹规划方法[J]. 中国机械工程, 2024, 35(02): 305-316.
[5]	叶伯生, 金雄程, 黎晗, 邵柏岩, 李晓昆, 李思澳. 伪目标迭代生成的机器人误差补偿算法[J]. 中国机械工程, 2024, 35(01): 136-143.
[6]	李光保, 高栋, 路勇, 平昊, 周愿愿. 自适应卡尔曼滤波与PSO-GA-BP算法的机器人误差补偿[J]. 中国机械工程, 2023, 34(20): 2456-2465.
[7]	王伟, 马乾伦, 白振华, 王子昂. 基于梯度提升决策树的冷轧高强钢卷力学性能预测[J]. 中国机械工程, 2023, 34(18): 2222-2229.
[8]	屈力刚, 苏岩, 邢宇飞. 基于SHO-NSGA混合算法的飞机油舱管路自动布局方法[J]. 中国机械工程, 2023, 34(15): 1864-1872.
[9]	彭翔, 江浩浩, 郭玉良, 李吉泉, 易兵, 姜少飞, . 机翼蒙皮铺层顺序和材料布局协同优化[J]. 中国机械工程, 2023, 34(12): 1415-1424,1435.
[10]	陈西忍, 叶文华, 张朝宏, 崔坤坤, 冷晟, 叶柳康. 基于NURBS曲线的超高速电梯导流罩多目标气动优化设计[J]. 中国机械工程, 2023, 34(12): 1436-1445,1464.
[11]	郑刚, 闫立方, 张开伟, 张旭. 整体叶盘叶片型面高精度六轴检测与误差补偿方法研究[J]. 中国机械工程, 2023, 34(08): 908-915，922.
[12]	陈启迪, 胡小龙, 吝敏, 孙晓霞, 张涛, 周志雄. 超精密加工误差补偿技术研究综述[J]. 中国机械工程, 2023, 34(03): 253-268.
[13]	田颖, 邵文婷, 王太勇. 车间生产过程的能量足迹建模与加工参数协同优化[J]. 中国机械工程, 2022, 33(21): 2547-2553.
[14]	王秋莲, 段星皓. 基于高维多目标候鸟优化算法的柔性作业车间调度[J]. 中国机械工程, 2022, 33(21): 2601-2612.
[15]	鲍宏, 杨靖, 柯庆镝, 李红真, 么永政, . 基于支持向量回归的熔丝制造3D打印能效优化模型[J]. 中国机械工程, 2022, 33(18): 2215-2226.