凸棱非平面聚晶金刚石齿的破岩机理及在含砾地层中的应用

doi:10.3969/j.issn.1004-132X.2024.02.022

摘要/Abstract

摘要： 为提高聚晶金刚石复合片（PDC）钻头在含砾、软硬交错等不均质地层中的抗冲击性能，开展了凸棱非平面PDC齿的研究。通过仿真和室内实验对比分析了凸棱非平面齿与常规平面齿的破岩机理。与平面齿相比，凸棱非平面齿与岩石的接触应力分布更均匀，切削破岩过程中的载荷波动幅度明显更小，切削稳定性更高。凸棱齿特殊的非平面结构改变了切削齿与岩石的互作用方式，在不均质地层得到成功应用。

关键词: 非平面聚晶金刚石齿, 含砾地层, 破岩机理, 冲击损坏

Abstract: A study of convex non-planar PDC cutter was conducted to improve the impact resistance of PDC bits in gravel-bearing, soft-hard interlaced, and other inhomogeneous formations. By comparing simulation and laboratory experiments, the mechanism of rock breaking between convex non-planar cutter and conventional planar cutter was investigated. Compared to planar cutter, the contact stress generated by cutting rock with convex non-planar cutter is more uniform on the cutter, the load fluctuation during the cutting processes is significantly smaller, and the cutting stability is higher. The special non-planar structure of the cutter changes the interaction mode between the cutting cutter and the rock, and is successfully applied in heterogeneous formations.

Key words: non-planar polycrystalline diamond compact(PDC) gear teeth bit, gravel-bearing formation, mechanism of rock breaking, impact damage

中图分类号:

TE242

陈炼, 魏小虎, 曹强, 周岩, 杨迎新, 胡川, 赵志杰, 伍彬. 凸棱非平面聚晶金刚石齿的破岩机理及在含砾地层中的应用[J]. 中国机械工程, 2024, 35(02): 371-379.

CHEN Lian, WEI Xiaohu, CAO Qiang, ZHOU Yan, YANG Yingxin, HU Chuan, ZHAO Zhijie, WU Bin. Mechanism of Rock Breaking by Convex Non-planar PDC Cutter and Its Applications in Gravel-bearing Formation[J]. China Mechanical Engineering, 2024, 35(02): 371-379.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2024.02.022

http://www.cmemo.org.cn/CN/Y2024/V35/I02/371

参考文献

［1］LIU W, QIAN X, LI T, et al. Investigation of the Tool-rock Interaction Using Drucker-Prager Failure Criterion［J］. Journal of Petroleum Science and Engineering, 2019, 173:269-278.
［2］苏义脑, 路保平, 刘岩生, 等. 中国陆上深井超深井钻完井技术现状及攻关建议［J］. 石油钻采工艺, 2020, 42(5):527-542.
SU Yinao, LU Baoping, LIU Yansheng, et al. Status and Research Suggestions on the Drilling and Completion Technologies for Onshore Deep and Ultra Deep Wells in China［J］. Oil Drilling & Production Technology, 2020, 42(5):527-542.
［3］李百胜, 孙明光. 用于含砾石且软硬交错地层的新型PDC钻头设计［J］.石油机械, 2004(9):32-34.
LI Baisheng, SUN Mingguang. The Design of PDC Bit for Multi-interbedded and Gravel Formation［J］. China Petroleum Machinery, 2004(9):32-34.
［4］孙明光, 张云连, 马德坤. 适合多夹层地层PDC钻头设计及应用［J］. 石油学报, 2001(5):95-99.
SUN Mingguang, ZHANG Yunlian, MA Dekun. Design and Application of PDC Bits Suitable for Multi-interbedded Formations［J］. Acta Petrolei Sinica, 2001(5):95-99.
［5］汪为涛. 非均质地层锥形辅助切削齿PDC钻头设计与试验［J］. 石油钻探技术, 2018, 46(2):58-62.
WANG Weitao. Design and Test of a New PDC Bit with Tapered Auxiliary Cutter for Heterogeneous Formations［J］. Petroleum Drilling Techniques, 2018, 46(2):58-62.
［6］STAVROU A, MURPHY W. Quantifying the Effects of Scale and Heterogeneity on the Confined Strength of Microdefected Rocks［J］. International Journal of Rock Mechanics and Mining Sciences, 2018, 102:131-143.
［7］王坤. 库车山前砾石层用钻头设计与应用［D］. 东营:中国石油大学(华东), 2020.
WANG Kun. Design and Application of the Drill Bits Used in Gravel Stratum in Kuqa Piedmont［D］. Dongying:China University of Petroleum(East China), 2020.
［8］彭齐, 周英操, 周波, 等.凸脊型非平面齿PDC钻头的研制与现场试验［J］. 石油钻探技术, 2020, 48(2):49-55.
PENG Qi, ZHOU Yingcao, ZHOU Bo, et al. Development and Field Test of a Non-planar Cutter PDC Bit with Convex Ridges［J］. Petroleum Drilling Techniques, 2020, 48(2):49-55.
［9］马亚超, 张鹏, 黄志强, 等. 全局力平衡PDC钻头布齿优化设计［J］. 中国机械工程, 2020, 31(20):2412-2419.
MA Yachao, ZHANG Peng, HUANG Zhiqiang, et al. Optimal Design for Cutter-layout of Global Force Balanced PDC Bits［J］. China Mechanical Engineering, 2020, 31(20):2412-2419.
［10］邹德永, 徐城凯, 易杨, 等. PDC钻头布齿参数与地层适应性的试验研究［J］. 天然气工业, 2017, 37(9):85-90.
ZOU Deyong, XU Chengkai, YI Yang, et al. An Experimental Study on PDC Bits' Cutter Parameters and Formation Adaptability［J］. Natural Gas Industry, 2017, 37(9):85-90.
［11］刘志鹏, 曾恒, 周学军. 适用于特定地层的PDC钻头个性化设计［J］. 天然气工业, 2013,(3):59-63.
LIU Zhipeng, ZENG Heng, ZHOU Xuejun. An Individualized PDC Bit Design for Specific Formations［J］. Natural Gas Industry, 2013,(3):59-63.
［12］CHEN S, ARFELE R, ANDERIE S, et al. A New Theory on Cutter Layout for Improving PDC-bit Performance in Hard and Transit Formation Drilling［J］. SPE Drilling & Completion, 2013, 28(4):338-349.
［13］高绍智, 张建华, 李天明, 等. 适用于砾石夹层钻进的PDC钻头［J］. 石油钻采工艺, 2006(4):20-21.
GAO Shaozhi, ZHANG Jianhua, LI Tianming, et al. Research on PDC Bit for Drilling in Gravel Interlayer［J］. Oil Drilling & Production Technology, 2006(4):20-21.
［14］SHAO Fangyuan, LIU Wei, GAO Deli, et al. Study on Rock-breaking Mechanism of Axe-shaped PDC Cutter［J］. Journal of Petroleum Science and Engineering, 2021, 205:108922.
［15］刘和兴, 罗云旭, 刘伟吉, 等. 异形PDC 齿切削破碎非均质花岗岩机理研究［J］. 石油机械, 2022, 50(4):22-31.
LIU Hexing, LUO Yunxu, LIU Weiji, et al. Rock-breaking Mechanism of Special-shaped PDC Cutter in Heterogeneous Granite［J］. China Petroleum Machinery, 2022, 50(4):22-31.
［16］ALAWI M A, NAJWANI M, WALKER H, et al. Optimize, Sustain and Transform Drilling Performance Improvements through 12-1/4" Intermediate Section［R］. SPE 183349-MS, 2016.
［17］徐卫强, 史怀忠, 曹权, 等. 锥形PDC齿破碎砾岩特性试验研究［J］. 石油机械, 2021, 49(9):9-16.
XU Weiqiang, SHI Huaizhong, CAO Quan, et al. Experimental Study on Conglomerate Breaking Characteristics of Conical PDC Cutter［J］. China Petroleum Machinery, 2021, 49(9):9-16.
［18］陈炼, 任海涛, 杨迎新, 等. 一种聚晶金刚石复合片:CN200820223366.5［P］. 2009-09-23.
CHEN Lian, REN Haitao, YANG Yingxin, et al. A Polycrystalline Diamond Composite:CN200820223366.5［P］. 2009-09-23.
［19］邹德永, 陈雅辉, 赵方圆, 等. 斧形PDC齿破岩规律数值模拟研究［J］. 特种油气藏, 2021, 28(6):137-143.
ZOU Deyong, CHEN Yahui, ZHAO Fangyuan, et al. Study on Rock Breaking Rules of Axe-shaped PDC Cutter with Numerical Simulation［J］. Special Oil and Gas Reservoirs, 2021, 28(6):137-143.
［20］刘笑傲, 邹德永, 王庆, 等. 基于离散元法的砾岩地层三棱齿切削破岩数值模拟［J］. 特种油气藏, 2022, 29(4):149-155.
LIU Xiaoao, ZOU Deyong, WANG Qing, et al. Numerical Simulation of Rock Breaking by Triangular Prismatic Cutter in Conglomerate Formation Based on Discrete Element Method［J］. Special Oil and Gas Reservoirs, 2022, 29(4):149-155.
［21］谢晗, 况雨春, 秦超. 非平面PDC切削齿破岩有限元仿真及试验［J］. 石油钻探技术, 2019, 47(5):69-73.
XIE Han, KUANG Yuchun, QIN Chao. The Finite Element Simulation and Test of Rock Breaking by Non-planar PDC Cutting Cutter［J］. Petroleum Drilling Techniques, 2019, 47(5):69-73.
［22］BURTON H. Geometrix 4D Shaped Cutters［EB/OL］.［2023-04-11］. https:∥cdn.brandfolder.io/IMT6VIR6/as/kjhvfq64cxqc8zv9gqxkc3/Geometrix-datasheet.pdf.
［23］BAKER H. StayCool 2.0 Multidimensional Cutter Technology［EB/OL］.［2023-04-11］. https:∥dam.bakerhughes.com/m/7edd5c3a7cb78480/original/StayCool-2-0-Multidimensional-Cutter-Technology-Overview-PDF.
［24］STOCKEY D, DIGIOVANNI A, FUSELIER D, et al. Innovative Non-planar Face PDC Cutters Demonstrate 21% Drilling Efficiency Improvement in Interbedded Shales and Sand［C］∥IADC/SPE Drilling Conference and Exhibition. Fort Worth, 2014:10.2118/168000-MS.
［25］邹德永, 潘龙, 崔煜东, 等. 斧形PDC切削齿破岩机理及试验研究［J］. 石油机械, 2022, 50(1):34-40.
ZOU Deyong, PAN Long, CUI Yudong, et al. Rock Breaking Mechanism and Experimental Study of Axe-shaped PDC Cutter［J］. Petroleum Machinery, 2022, 50(1):34-40.
［26］LIU Jianxun, ZHENG Hualin, KUANG Yuchun, et al.3D Numerical Simulation of Rock Cutting of an Innovative Non-planar Face PDC Cutter and Experimental Verification［J］. Applied Sciences-Basel, 2019, 9(20):4372.
［27］李琴, 傅文韬, 黄志强, 等. 硬地层中新型PDC齿破岩机理及试验研究［J］. 工程设计学报, 2019, 26(6):635-644.
LI Qin, FU Wentao, HUANG Zhiqiang, et al. Rock Breaking Mechanism and Experimental Study of New PDC Tooth in Hard Formation［J］. Journal of Engineering Design, 2019, 26(6):635-644.
［28］林兆虎, 杨迎新, 于洪波, 等. 屋脊齿破岩效率研究［J］. 地下空间与工程学报, 2019, A2:751-758.
LIN Zhaohu, YANG Yingxin, YU Hongbo, et al. Study on the Rock-breaking Efficiency of Ridge Cutter［J］. China Journal of Underground Space and Engineering, 2019, A2:751-758.
［29］邓敏凯, 伍开松, 胡伟. PDC钻头切削齿破岩仿真与试验分析［J］. 石油机械, 2014, 42(1):10-13.
DENG Minkai, WU Kaisong, HU Wei. Rock-breaking Simulation and Experimental Analysis of PDC Bit Cutter［J］. Petroleum Machinery, 2014, 42(1):10-13.
［30］刘建华, 令文学, 王恒. 非平面三棱形PDC齿破岩机理研究与现场试验［J］. 石油钻探技术, 2021, 49(5):46-50.
LIU Jianhua, LING Wenxue, WANG Heng. Study on Rock Breaking Mechanism and Field Test of Triangular Prismatic PDC Cutters［J］. Petroleum Drilling Technology, 2021, 49(5):46-50.

[1]	李琴;傅文韬;黄志强;马亚超;谢豆. 硬地层单牙轮-PDC钻扩联合钻头破岩特性[J]. 中国机械工程, 2019, 30(22): 2683-2690.
[2]	程军, 巩亚东, 李伟, 刘月明. 基于数字样机技术的隧道掘进机刀盘破岩机理分析[J]. 中国机械工程, 2013, 24(14): 1847-1853.
[3]	刘志杰;滕弘飞;史彦军;杨光辉;. TBM刀盘设计若干关键技术[J]. J4, 2008, 19(16): 0-1897.