聚四氟乙烯材料切削工艺和应用研究进展

doi:10.3969/j.issn.1004-132X.2024.03.012

摘要/Abstract

摘要： 聚四氟乙烯（polytetrafluoroethylene，PTFE）因其优异的物理化学性能而成为生产制造电子通信、航空航天等领域关键零部件的重要材料。相比模压烧结工艺，切削工艺能够更高效地加工结构较为复杂的PTFE零部件。然而，PTFE材料具有韧性强、回弹性高、导热性差和线膨胀系数大等特点，使得其切削加工质量难以保证，在一些特殊领域，对PTFE零部件的表面洁净度更是有极高的要求，这些都对PTFE材料的切削工艺提出了新的挑战。从PTFE材料的基础力学和物理化学等特性出发，总结了PTFE材料的切削加工性；结合聚合物切削理论及其研究方法分析了PTFE材料的切削去除机理；阐述了PTFE及其复合材料的车、铣、钻等切削加工工艺；最后概述了PTFE材料切削工艺在相关重要领域的应用现状，并从材料性能研究、基础切削理论研究、切削工艺探索等方面总结了现有研究和应用中存在的问题，对未来研究的发展趋势和研究重点进行了展望。

关键词: 聚四氟乙烯, 切削机理, 切削工艺, 力学性能

Abstract: PTFE, with the excellent physical and chemical properties, be came an important material in producing key parts in the fields such as electronic communication, aerospace, et al. Compared with the molding and sintering processes, the cutting technology might be used to manufacture PTFE parts with complex structures more efficiently. However, PTFE had the characteristics of strong toughness, high resilience, poor thermal conductivity, and large linear expansion coefficient. So, the machining quality of PTFE parts was difficult to be guaranteed. In some special cases, the high surface cleanliness of the PTFE parts was also required, which presented new challenges to the cutting technology of PTFE materials. Firstly, the machinability of PTFE was summarized based on the basic mechanics, physical and chemical properties. Secondly, the cutting removal mechanism of PTFE was analyzed based on the polymer cutting theory and research methods. Then, the cutting technology of PTFE such as turning, milling, and drilling was presented. Finally, the applications of PTFE cutting technology was discussed. The problems in the existing researches in terms of material property research, basic cutting theory research, and cutting technology exploration were summarized. And the research trend and focus were prospected.

Key words: polytetrafluoroethylene(PTFE), cutting mechanism, cutting technology, mechanics property

中图分类号:

TH16

倪敬, 崔智, 何利华, 付新, 朱泽飞. 聚四氟乙烯材料切削工艺和应用研究进展[J]. 中国机械工程, 2024, 35(03): 498-514.

NI Jing, CUI Zhi, HE Lihua, FU Xin, ZHU Zefei. State-of-the-Art of Cutting Technology and Applications of PTFE[J]. China Mechanical Engineering, 2024, 35(03): 498-514.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2024.03.012

http://www.cmemo.org.cn/CN/Y2024/V35/I03/498

参考文献

［1］PLUNKETT R J. Tetrafluoroethylene Polymers:US2230654［P］. 1941-02-04.
［2］DHANUMALAYAN E, JOSHI G M. Performance Properties and Applications of Polytetrafluoroethylene (PTFE)—a Review［J］. Advanced Composites and Hybrid Materials, 2018, 1(2):247-268.
［3］古年年, 吴德谦, 黄雪梅. 聚四氟乙烯复合材料的物理机械性能［J］. 润滑与密封, 1997, 22(6):50-51.
GU Niannian, WU Deqian, HUANG Xuemei. Physical and Mechanical Properties of PTFE Composites［J］. Lubrication Engineering, 1997, 22(6):50-51.
［4］徐博, 朱光明, 祝萌. 航空航天用膨化聚四氟乙烯密封材料研究进展［J］. 中国塑料, 2013, 27(8):8-12.
XU Bo, ZHU Guangming, ZHU Meng. Research Progress in Expanded Polytetrafluoroethylence Aerospace Sealant［J］. China Plastics, 2013, 27(8):8-12.
［5］SHEN Mingxue, LI Bo, ZHANG Zhinan, et al. Abrasive Wear Behavior of PTFE for Seal Applications under Abrasive-atmosphere Sliding Condition［J］. Friction, 2020, 8(4):755-767.
［6］HARRIS K L, PITENIS A A, SAWYER W G, et al. PTFE Tribology and the Role of Mechanochemistry in the Development of Protective Surface Films［J］. Macromolecules, 2015, 48(11):3739-3745.
［7］吴祥伟, 王龙飞, 申慧敏. 超洁净电磁阀动态特性仿真与优化［J］. 液压与气动, 2022, 46(5):46-52.
WU Xiangwei, WANG Longfei, SHEN Huimin. Simulation and Optimization of Dynamic Characteristics of Ultra-clean Solenoid Valve［J］. Chinese Hydraulics & Pneumatics, 2022, 46(5):46-52.
［8］刘景霞, 孟章富, 崔坤伟, 等. 聚四氟乙烯制品及其应用［J］. 有机氟工业, 2020(3):17-20.
LIU Jingxia, MENG Zhangfu, CUI Kunwei, et al. Polytetrafluoroethylene Products and Its Application［J］. Organo-Fluorine Industry, 2020(3):17-20.
［9］陈碧波. 聚四氟乙烯蠕变性能研究［D］. 西安:西北工业大学, 2007.
CHEN Bibo. Study on the Creep Properties of PTFE［D］. Xian:Northwestern Polytechnical University, 2007.
［10］王佰春, 杨震, 陈越, 等. PTFE悬浮树脂的加工和应用［J］. 有机氟工业, 2022(1):43-47.
WANG Baichun, YANG Zhen, CHEN Yue, et al. Processing and Application of PTFE Suspension Resin［J］. Organo-Fluorine Industry, 2022(1):43-47.
［11］PUTS G J, CROUSE P, AMEDURI B M. Polytetrafluoroethylene:Synthesis and Characterization of the Original Extreme Polymer［J］. Chemical Reviews, 2019, 119(3):1763-1805.
［12］WOOD L. Fluoropolymers Products, Technologies and Applications Market Report 2016—Research and Markets［R］. Dublin:Research and Markets, 2016.
［13］冯之敬. 机械制造工程原理［M］. 3版. 北京:清华大学出版社, 2015.
FENG Zhijing. Principles of Mechanical Manufacturing Engineering［M］. 3rd ed. Beijing:Tsinghua University Press, 2015.
［14］樊兴民. 工程塑料及其应用［M］. 北京：机械工业出版社, 2016.
FAN Xingmin. Application of Engineering Plastics［M］. Beijing:China Machine Press, 2016.
［15］RAE P J, DATTELBAUM D M. The Properties of Poly(tetrafluoroethylene) (PTFE) in Compression［J］. Polymer, 2004, 45(22):7615-7625.
［16］RAE P J, BROWN E N. The Properties of Poly(tetrafluoroethylene) (PTFE) in Tension［J］. Polymer, 2005, 46(19):8128-8140.
［17］ZHENG Xiaotao, WEN Xiang, WANG Wei, et al. Creep-ratcheting Behavior of PTFE Gaskets under Various Temperatures［J］. Polymer Testing, 2017, 60:229-235.
［18］ZHENG Xiaotao, WEN Xiang, GAO Jiuyang, et al. Temperature-dependent Ratcheting of PTFE Gaskets under Cyclic Compressive Loads with Small Stress Amplitude［J］. Polymer Testing, 2017, 57:296-301.
［19］ZHANG Zhe, CHEN Xu. Multiaxial Ratcheting Behavior of PTFE at Room Temperature［J］. Polymer Testing, 2009, 28(3):288-295.
［20］何曼君, 张红东, 陈维孝, 等. 高分子物理［M］. 3版. 上海:复旦大学出版社, 2007.
HE Manjun, ZHANG Hongdong, CHEN Weixiao, et al. Polymer Physics［M］. 3rd ed. Shanghai:Fudan University Press, 2007.
［21］The Chemours Chemical Co., Ltd. Teflon-ptfe-properties-handbook［EB/OL］.［2022-07-31］https:∥www.teflon.com/es/-/media/files/teflon/teflon-ptfe-properties-handbook.pdf.
［22］XIAO K Q, ZHANG L C. The Role of Viscous Deformation in the Machining of Polymers［J］. International Journal of Mechanical Sciences, 2002, 44(11):2317-2336.
［23］ARAKI Y. Stress Relaxation of Polytetrafluoroethylene in the Vicinity of Its Glass Transition Temperature at about 130℃［J］. Journal of Applied Polymer Science, 1965, 9(4):1515-1524.
［24］SMITH E F. Single-point Diamond Turning of Amorphous Thermoplastic Polymers［D］. Raleigh:North Carolina State University, 1989.
［25］CRABTREE P, DHOKIA V G, NEWMAN S T, et al. Manufacturing Methodology for Personalised Symptom-specific Sports Insoles［J］. Robotics and Computer-Integrated Manufacturing, 2009, 25(6):972-979.
［26］STARKWEATHER H W. The Effect of Absorbed Chemicals on the Internal Motions in Poly(Tetrafluoroethylene)［J］. Macromolecules, 1984, 17(6):1178-1180.
［27］WORTMANN F J. Analysing the Relaxation Behaviour of Poly(Tetrafluoroethylene) in the α-transition Region by Applying a Two-component Model［J］. Polymer, 1996, 37(12):2471-2476.
［28］CALLEJA G, JOURDAN A, AMEDURI B, et al. Where Is the Glass Transition Temperature of Poly(Tetrafluoroethylene)? a New Approach by Dynamic Rheometry and Mechanical Tests［J］. European Polymer Journal, 2013, 49(8):2214-2222.
［29］TOBOLSKY A V, KATZ D, TAKAHASHI M. Rheology of Polytetrafluoroethylene［J］. Journal of Polymer Science Part A:General Papers, 1963, 1(1):483-489.
［30］ARAKI Y. Thermal Expansion Coefficient of Polytetrafluoroethylene in the Vicinity of Its Glass Transition at about 400°K［J］. Journal of Applied Polymer Science, 1965, 9(2):421-427.
［31］SAUER B B, AVAKIAN P, STARKWEATHER H W. Cooperative Relaxations in Semicrystalline Fluoropolymers Studied by Thermally Stimulated Currents and Ac Dielectric［J］. Journal of Polymer Science Part B:Polymer Physics, 1996, 34(3):517-526.
［32］ERVINE P, ODONNELL G E, WALSH B. Fundamental Investigations into Burr Formation and Damage Mechanisms in the Micro-milling of a Biomedical Grade Polymer［J］. Machining Science and Technology, 2015, 19(1):112-133.
［33］KOBAYASHI A, SAITO K. On the Cutting Mechanism of High Polymers［J］. Journal of Polymer Science, 1962, 58(166):1377-1396.
［34］SAITO K. Fracture Phenomena of High Polymers in Cutting［J］. Journal of Macromolecular Science, Part B, 1981, 19(3):459-485.
［35］李杨. PEEK薄壁圆环切削加工工艺研究［D］. 哈尔滨:哈尔滨工业大学, 2021.
LI Yang. Research on Machining Process of Poly-ether-ether-Ketone(PEEK) Thin Wall Ring［D］. Harbin:Harbin Institute of Technology, 2021.
［36］朱兆龙. 石塑复合材料(SPC)切削性能研究［D］. 南京:南京林业大学, 2020.
ZHU Zhaolong. Research on the Cutting Performance of Stone Plastic Composite(SPC)［D］. Nanjing:Nanjing Forestry University, 2020.
［37］YANG Bin, WANG Hongjian, FU Kunkun, et al. Prediction of Cutting Force and Chip Formation from the True Stress-strain Relation Using an Explicit FEM for Polymer Machining［J］. Polymers, 2022, 14(1):189.
［38］FU Guoyu, SUN Fengzhen, HUO Dehong, et al. FE-simulation of Machining Processes of Epoxy with Mulliken Boyce Model［J］. Journal of Manufacturing Processes, 2021, 71:134-146.
［39］PATEL Y, BLACKMAN B R K, WILLIAMS J G. Determining Fracture Toughness from Cutting Tests on Polymers［J］. Engineering Fracture Mechanics, 2009, 76(18):2711-2730.
［40］WANG H, CHANG L, YE L, et al. On the Toughness Measurement for Ductile Polymers by Orthogonal Cutting［J］. Engineering Fracture Mechanics, 2015, 149:276-286.
［41］WANG H, CHANG L, MAI Y W, et al. An Experimental Study of Orthogonal Cutting Mechanisms for Epoxies with Two Different Crosslink Densities［J］. International Journal of Machine Tools and Manufacture, 2018, 124:117-125.
［42］WYETH D J. An Investigation into the Mechanics of Cutting Using Data from Orthogonally Cutting Nylon 66［J］. International Journal of Machine Tools and Manufacture, 2008, 48(7/8):896-904.
［43］CUI Zhi, NI Jing, HE Lihua, et al. Investigation of Chip Formation, Cutting Force and Surface Roughness during Orthogonal Cutting of Polytetrafluoroethylene［J］. Journal of Manufacturing Processes, 2022, 77:485-494.
［44］倪敬, 孙静波, 何利华, 等. PTFE材料正交切削切屑成形特性研究［J］. 中国机械工程, 2022, 33(22):2733-2740.
NI Jing, SUN Jingbo, HE Lihua, et al. Study on Chip Forming Characteristics of Orthogonal Cutting of PTFE Materials［J］. China Mechanical Engineering, 2022, 33(22):2733-2740.
［45］蒋丽飞, 肖雅文. 关于提高聚四氟乙烯材料切削加工质量的研究［J］. 电子世界, 2013(24):241.
JIANG Lifei, XIAO Yawen. Research on Improving Machined Quality of Polyterafluoroethlene［J］. Electronics World, 2013(24):241.
［46］王方凯. 聚四氟乙烯薄壁喷口的加工［J］. 现代制造技术与装备, 2016(3):133-134.
WANG Fangkai. PTFE Thin Wall Orifice Processing［J］. Modern Manufacturing Technology and Equipment, 2016(3):133-134.
［47］朱春江. 影响聚四氟乙烯材料加工表面粗糙度因素的研究［J］. 航空精密制造技术, 2016, 52(2):56-59.
ZHU Chunjiang. Factors Influencing PTFE Material Processing Surface Roughness［J］. Aviation Precision Manufacturing Technology, 2016, 52(2):56-59.
［48］颖惠民, 付婧媛, 刘范, 等. 超洁净PTFE车削加工切削参数对表面形貌及粗糙度变化影响［J］. 液压与气动, 2022, 46(5):26-35.
YING Huimin, FU Jingyuan, LIU Fan, et al. The Influence of Cutting Parameters on Surface Morphology and Roughness during the Ultra-clean PTFE Turning Process［J］. Chinese Hydraulics & Pneumatics, 2022, 46(5):26-35.
［49］鲍秀森. 聚四氟乙烯切削加工［J］. 机械制造, 1999, 37(5):26.
BAO Xiusen. Ptfe Cutting Processing［J］. Machinery, 1999, 37(5):26.
［50］王红庆, 郭英杰, 李春明. 薄壁聚四氟乙烯制品的车削工艺［J］. 机械工人·冷加工, 2003(12):5-6.
WANG Hongqing, GUO Yingjie, LI Chunming. Turning Technology of Thin-walled PTFE Products［J］. Metal Working(Metal Cutting), 2003(12):5-6.
［51］王庆辉, 权晓宁, 余震. 防止聚四氟乙烯加工变形的方法［J］. 金属加工(冷加工), 2014(9):35-36.
WANG Qinghui, QUAN Xiaoning, YU Zhen. Methods to Prevent Deformation of PTFE during Processing［J］. Metal Working Metal Cutting, 2014(9):35-36.
［52］朱华锋. 聚四氟乙烯的切削难点及改善措施［J］. 航空精密制造技术, 1995, 31(3):41-42.
ZHU Huafeng. Cutting Difficulties and Improvement Measures of PTFE［J］. Aviation Precision Manufacturing Technology, 1995, 31(3):41-42.
［53］王春震, 李辉, 蔡祥宝. 聚四氟乙烯薄壁密封件的切削加工［J］. 航天制造技术, 2012(4):44-46.
WANG Chunzhen, LI Hui, CAI Xiangbao. Cutting Thin Wall Sealing Workpiece of Polytetrafluoroethylene［J］. Aerospace Manufacturing Technology, 2012(4):44-46.
［54］CUI Zhi, NI Jing, HE Lihua, et al. Assessment of Cutting Performance and Surface Quality on Turning Pure Polytetrafluoroethylene［J］. Journal of Materials Research and Technology, 2022, 20:2990-2998.
［55］NI Jing, YUAN Ye, CUI Zhi, et al. Investigation of Machinability in Turning of PTFE Based on MRR and Cutting Energy［J］. Journal of Manufacturing Processes, 2023, 85:122-131.
［56］NI Jing, HAN Lidong, WU Shaofeng, et al. Modeling of Thrust and Torque for Drilling PTFE Materials［J］. The International Journal of Advanced Manufacturing Technology, 2022, 120(1):215-226.
［57］NATARAJAN E, KAVIARASAN V, LIM W H, et al. Non-dominated Sorting Modified Teaching–Learning-based Optimization for Multi-objective Machining of Polytetrafluoroethylene (PTFE)［J］. Journal of Intelligent Manufacturing, 2020, 31(4):911-935.
［58］SATHIYA NARAYANAN N, BASKAR N, GANESAN M, et al. Evaluation and Optimization of Surface Roughness and Metal Removal Rate through RSM, GRA, and TOPSIS Techniques in Turning PTFE Polymers［C］∥Advances in Manufacturing Technology. Singapore:Springer, 2019:595-605.
［59］VLAD D, FETECAU C, DOICIN C. Experimental Study on the Cutting Forces in PTFE Orthogonal Cutting［J］. Materiale Plastice, 2013, 50(4):326-333.
［60］AZZI A, BOULANOUAR L, LAOUISI A, et al. Modelingand Optimization of Machining Parameters to Minimize Surface Roughness Andmaximize Productivitywhen Turning Polytetrafluoroethylene (PTFE)［J］. The International Journal of Advanced Manufacturing Technology, 2022, 123(1):407-430.
［61］OKUDA K, NUNOBIKI M. Study on Surface Integrity of PTFE Finished by Ultra-precision Cutting and Surface Performance［J］. Key Engineering Materials, 2005, 291/292:475-482.
［62］范忠仁. 非金属切削刀具［M］. 北京:机械工业出版社, 1990.
FAN Zhongren. Non-metallic Cutting Tool［M］. Beijing:China Machine Press, 1990.
［63］王平, 张大砚. 聚四氟乙烯零件车削加工方法探索［J］. 机械研究与应用, 2016, 29(1):182-183.
WANG Ping, ZHANG Dayan. Exploration on Turning Method of the PTFE Parts［J］. Mechanical Research & Application, 2016, 29(1):182-183.
［64］GAN Yongquan, WANG Yongqing, LIU Kuo, et al. A Novel and Effective Method for Cryogenic Milling of Polytetrafluoroethylene［J］. The International Journal of Advanced Manufacturing Technology, 2021, 112(3):969-976.
［65］王一超. 提高聚四氟乙烯工件表面质量与加工精度研究［D］. 兰州:兰州理工大学, 2021.
WANG Yichao. Research on Improving Surface Quality and Machining Recision of PTFE Workpiece［D］. Lanzhou:Lanzhou University of Technology, 2021.
［66］白宝州, 王克强, 杨庆辉. 聚四氟乙烯材料零件车削加工方法探索［J］. 精密制造与自动化, 2014(4):59-60.
BAI Baozhou, WANG Keqiang, YANG Qinghui. Exploration on Turning Processing Method of PTFE Parts［J］. Precise Manufacturing & Automation, 2014(4):59-60.
［67］曾晓蓉, 贾海军. 聚四氟乙烯介质套的切削加工［J］. 航空精密制造技术, 2014, 50(1):61-62.
ZENG Xiaorong, JIA Haijun. Cutting Process for Dielectric Sleeve of PTEF［J］. Aviation Precision Manufacturing Technology, 2014, 50(1):61-62.
［68］冯培晔. PTFE耐磨条加工专用数控车床的研制［D］. 上海:东华大学, 2014.
FENG Peiye. The Develop and Manufacture on Special Purpo Se CNC Lathe for Machining PTFE Wearing Strip［D］. Shanghai:Donghua University, 2014.
［69］于家祥, 方军, 汪亦凡, 等. 聚四氟乙烯衬套加工变形的研究分析［J］. 四川有色金属, 2021(2):48-50.
YU Jiaxiang, FANG Jun, WANG Yifan, et al. Research and Analysis of Processing Deformation of Polytetrafluoroethylene Bushing［J］. Sichuan Nonferrous Metals, 2021(2):48-50.
［70］高磊, 王建中. 聚四氟乙烯材料端面余弦曲线槽的车削［J］. 金属加工(冷加工), 2020(10):57-59.
GAO Lei, WANG Jianzhong. Turning of Teflon End Surface Cosine Curve Groove［J］. Metal Working (Metal Cutting), 2020(10):57-59.
［71］张宁健, 陈雷. 聚四氟乙烯材料薄壁盒体的加工［J］. 金属加工(冷加工), 2021(2):41-42.
ZHANG Ningjian, CHEN Lei. Machining of Teflon Thin-walled Box［J］. Metal Working (Metal Cutting), 2021(2):41-42.
［72］万长鑫, 詹胜鹏, 陈辉, 等. 功能性填料改性聚合物材料的摩擦学研究进展［J］. 材料工程, 2022, 50(2):73-83.
WAN Changxin, ZHAN Shengpeng, CHEN Hui, et al. Tribology Research Progress of Functional Fillers Modified Polymer Materials［J］. Journal of Materials Engineering, 2022, 50(2):73-83.
［73］HSISSOU R, SEGHIRI R, BENZEKRI Z, et al. Polymer Composite Materials:a Comprehensive Review［J］. Composite Structures, 2021, 262:113640.
［74］高磊. 基于玻纤填充PTFE的摩擦性能及寿命研究［D］. 上海:上海工程技术大学, 2021.
GAO Lei. Study on the Tribological Properties and Life Prediction of PTFE Composites Filled with Glass Fiber［D］. Shanghai:Shanghai University of Engineering Science, 2021.
［75］李月霞. 青铜粉与碳化硼填充改性聚四氟乙烯性能研究［D］. 湘潭:湘潭大学, 2021.
LI Yuexia. Research on Polytetrafluoroethylene Composites Modified with Bronze and Boron Carbide［D］. Xiangtan:Xiangtan University, 2021.
［76］李波. 颗粒增强高分子基复合材料车削加工性能研究［D］. 大连:大连理工大学, 2022.
LI Bo. Study on Turning Performance of Particle Reinforced Polymer Matrix Composites［D］.Dalian:Dalian University of Technology, 2022.
［77］FETECAU C, STAN F. Study of Cutting Force and Surface Roughness in the Turning of Polytetrafluoroethylene Composites with a Polycrystalline Diamond Tool［J］. Measurement, 2012, 45(6):1367-1379.
［78］STAN F, VLAD D, FETECAU C. Statistical Cutting Force Model for Orthogonal Cutting of Polytetrafluoroethylene(PTFE) Composites［C］∥Proceedings of ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference. Madison, 2013:V001T01A022.
［79］ANSARI M S, SHARMA D, NIKAM S. Study of Cutting Forces and Surface Roughness in Turning of Bronze Filled Polytetrafluoroethylene［J］. Advances in Applied Computational Mechanics, 2013, 4(2):111-120.
［80］LI P Z, ZHANG W M. Wear Mechanism and Life Prediction of TiN Coated Tool in High Speed Milling of Ceramic-PTFE Composite［J］. Materials Research Innovations, 2014, 18:S1-84.
［81］LI P Z, ZHANG W M. Tool Life Based Cutting Parameter Selection in High Speed Milling of Ceramic–PTFE Composites［J］. Materials Research Innovations, 2014, 18(sup1):S1-76-S1-80.
［82］顾平. 铝基PTFE覆铜板机加工工艺［J］. 电子机械工程, 1999, 15(2):60-64.
GU Ping. The Machining Technology for PTFE Copper Foil Clad Board with Aluminum-alloy Base［J］. Electro-Mechanical Engineering, 1999, 15(2):60-64.
［83］王昌赢, 邱坤贤, 魏莹莹, 等. PTFE/CFRP/铝合金叠层材料钻削试验研究［J］. 航空制造技术, 2015, 58(10):90-93.
WANG Changying, QIU Kunxian, WEI Yingying, et al. Experimental Investigation on Drilling of PTFE/CFRP/Aluminum Stack［J］. Aeronautical Manufacturing Technology, 2015, 58(10):90-93.
［84］张同硕. 核环吊减震装置设计研究［D］. 大连:大连理工大学, 2021.
ZHANG Tongshuo. Design and Research on Damping Device of Nuclear Polar Crane［D］. Dalian:Dalian University of Technology, 2021.
［85］张勇. 基于5G通信的PTFE基高频覆铜板研究［D］. 南京：南京大学, 2020.
ZHANG Yong. Study on PTFE Based High Frequency Copper Clad Laminate Applied in 5G Communication［D］. Nanjing:Nanjing University, 2020.
［86］苟雪萍. PTFE高频电路板孔金属化研究及应用［D］. 成都:电子科技大学, 2019.
GOU Xueping. Research and Application of Hole Metallization of PTFE High Frequency Circuit Board［D］. Chengdu:University of Electronic Science and Technology of China, 2019.
［87］王立峰, 刘潜发, 袁欢欣. 77 GHz车载毫米波用PTFE基材的加工性研究［J］. 印制电路信息, 2021, 29(12):23-29.
WANG Lifeng, LIU Qianfa, YUAN Huanxin. The Processing Research of PTFE Materials for 77 GHz Millimeter Wave［J］. Printed Circuit Information, 2021, 29(12):23-29.
［88］IWAKI Co., Ltd．Pneumatic Drive Bellows Pumps FW/-H series FW| The Best Chemical Handling Pumps-IWAKI［EB/OL］.［2022-10-08］.https:∥www.iwakipumps.jp/en/products /pneumatic/fw.
［89］GEMU Co., Ltd．db_C50_51_57HPW_gb.pdf［EB/OL］.［2022-10-08］.https:∥www.gemu-group.com/en_GB/shop/document/db_C50_51_57HPW_zh.pdf/60146b14a8af5b7e3027272e17781405_2021.09.01.pdf.
［90］VALQUA, Ltd. 华尔氟龙切削波纹管［EB/OL］.［2022-10-08］.http:∥www.seal.valqua.co.jp/cn/vf_bellows/bellows/.
VALQUA, Ltd. Valflon Cutting Bellows［EB/OL］.［2022-10-08］.http:∥www.seal.valqua.co.jp/cn/vf_bellows/bellows/.
［91］VALQUA, Ltd. (7FZ1)喷射球(7FZ1－R)旋转式喷射球［EB/OL］.［2022-10-08］.http:∥www.seal.valqua.co.jp/cn/washing_nozzle/7fz1/.
VALQUA, Ltd. (7FZ1) Jet Ball(7FZ1－R) Rotary Jet Ball［EB/OL］.［2022-10-08］.http:∥www.seal.valqua.co.jp/cn/washing_nozzle/7fz1/.
［92］MICHAEL S, MARTIN S. Designing with PTFE.［EB/OL］.［2022-10-08］.https:∥www.elringklinger-ep.cn/fileadmin/user_upload/ekkt/downloads/konstruktions-handbuch/Designing_with_PTFE.pdf.
［93］孟章富, 张国佩. 半导体领域聚四氟乙烯的应用与开发［J］. 化工管理, 2020(11):205-206.
MENG Zhangfu, ZHANG Guopei. Application and Development of PTFE in Semiconductor Field［J］. Chemical Enterprise Management, 2020(11):205-206.
［94］杨津宇, 杨军, 白晓蓉, 等. 面向半导体湿法制程的超洁净流控技术综述［J］. 液压与气动, 2022, 46(5):1-17.
YANG Jinyu, YANG Jun, BAI Xiaorong, et al. Review of Ultra-clean Flow Control Technology in Wet Process of Semiconductor［J］. Chinese Hydraulics & Pneumatics, 2022, 46(5):1-17.
［95］Semiconductor Equipment and Materials International． Pro-visional Specification for Polymer Components Used in Ultrapure Water and Liquid Chemical Distribution Systems:SEMI F57-0301［S］．California:Semiconductor Equipment and Materials International，2001．
［96］白清顺, 郭永博, 陈家轩, 等. 超洁净制造的研究与发展［J］. 机械工程学报, 2016, 52(19):145-153.
BAI Qingshun, GUO Yongbo, CHEN Jiaxuan, et al. Research and Development of Ultra-clean Manufacturing［J］. Journal of Mechanical Engineering, 2016, 52(19):145-153.

[1]	王伟, 马乾伦, 白振华, 王子昂. 基于梯度提升决策树的冷轧高强钢卷力学性能预测[J]. 中国机械工程, 2023, 34(18): 2222-2229.
[2]	刘莹, 陈越, 赵雪利, 于同敏, 祝铁丽, . 超声辅助注射成形碳纤维增强聚丙烯制件性能研究[J]. 中国机械工程, 2023, 34(16): 1975-1981.
[3]	李光俊, 段宏, 徐磊, 阚琛, 刘忠亮, 高晓东. Al7.8Co20.6Cr12.2Fe11.5Ni40.7Ti7.2高熵超合金的摩擦磨损行为研究[J]. 中国机械工程, 2023, 34(13): 1568-1575.
[4]	周后明, 陈皓月, 李神贵. 基于梯度结构的Al2O3/ZrO2陶瓷刀具材料的制备及其力学性能[J]. 中国机械工程, 2023, 34(10): 1199-1207.
[5]	高恺, 李坤, 顾红历, . 镀锌量对低合金钢/5052铝合金感应静压焊接头微观组织与力学性能的影响[J]. 中国机械工程, 2023, 34(10): 1220-1229.
[6]	杨硕, 张杰, 孔宁, 王浩威, 王晓宇, 庄原. 航天用大展收比豆荚结构变形规律模型及其仿真验证[J]. 中国机械工程, 2023, 34(07): 780-788.
[7]	张岩, 黄传真, 刘含莲. 氮化碳基陶瓷刀具材料的制备与力学性能研究[J]. 中国机械工程, 2023, 34(03): 352-358，368.
[8]	方学伟, 蒋笑, 王喆, 武晓康, 黄科. ER120S-G高强钢电弧增材制造的工艺优化[J]. 中国机械工程, 2023, 34(02): 218-225.
[9]	蒋创宇, 张保强, 陈云, 王存福, 罗华耿, 胡杰翔, 曹龙超. Gyroid结构力学性能及数值收敛性研究[J]. 中国机械工程, 2022, 33(23): 2790-28000.
[10]	焦晨, 晁龙, 朱磊, 沈理达, 梁绘昕, 戴宁, 王长江, 孙骏. 面向骨科植入物的仿生多孔结构设计与制造方法[J]. 中国机械工程, 2022, 33(23): 2844-2850.
[11]	汤永锋, 路平, 刘斌, 江开勇, 颜丙功, 刘嘉伟, 韩伟, . 不同梯度变化方式的不规则多孔结构设计与力学性能分析[J]. 中国机械工程, 2022, 33(23): 2859-2866.
[12]	倪敬, 孙静波, 何利华, 崔智, 薛飞. PTFE材料正交切削切屑成形特性研究[J]. 中国机械工程, 2022, 33(22): 2733-2740.
[13]	张帅, 陈照强, 肖光春, 衣明东, 张静婕, 周婷婷, 许崇海. Si3N4/TiC/ZrSi2陶瓷刀具裂纹愈合性能研究[J]. 中国机械工程, 2022, 33(19): 2288-2297.
[14]	曾寿金, , 李传生, 刘广, 许明三, 李涤尘. 选区激光熔化梯度多孔支架力学性能和能量吸收研究[J]. 中国机械工程, 2022, 33(19): 2364-2371.
[15]	林羽东, 郭智威, 袁成清, . 聚四氟乙烯填充含量对钢背超高分子量聚乙烯纤维织物复合材料摩擦学性能的影响[J]. 中国机械工程, 2022, 33(12): 1484-1492，1503.