铣削工艺优化对镍基高温合金加工残余应力分布影响研究

doi:10.3969/j.issn.1004-132X.2024.04.006

中国机械工程 ›› 2024, Vol. 35 ›› Issue (04): 624-635.DOI: 10.3969/j.issn.1004-132X.2024.04.006

铣削工艺优化对镍基高温合金加工残余应力分布影响研究

张金阳1;许伟春2;王笑含3;江小辉1;高山1

1.上海理工大学机械工程学院，上海,200093
2.上海航天技术研究院，上海,201109
3.上海航天设备制造总厂有限公司，上海,200240

出版日期:2024-04-25 发布日期:2024-05-29
通讯作者: 江小辉（通信作者），男，1986年生，教授、博士研究生导师。主要研究方向为航空航天制造技术、机械装备设计及自动化、燃料电池关键部件设计制造技术。发表论文30余篇。E-mail:jiangxh@usst.edu.cn。
作者简介:张金阳，男，1995年生，硕士研究生。主要研究方向为航空航天薄壁件加工。E-mail:1139957568@qq.com。
基金资助:
国家自然科学基金(52175427）；国防基础科研项目（JCKY2020203B037）；上海市自然科学基金（20ZR1438000）

Study on Influences of Milling Process Optimization on Residual Stress Distribution for Machining Nickel-based Superalloys

ZHANG Jinyang1;XU Weichun2;WANG Xiaohan3;JIANG Xiaohui1;GAO Shan1

1.School of Mechanical Engineering,University of Shanghai for Science and Technology,
Shanghai，200093
2.Shanghai Academy of Spaceflight Technology,Shanghai，201109
3.Shanghai Aerospace Equipments Manufacturer Co.，Ltd.,Shanghai,200240

Online:2024-04-25 Published:2024-05-29

摘要/Abstract

摘要： 镍基高温合金加工残余应力分布状态对产品质量有显著影响，为实现对残余应力的控制，采用仿真与实验结合的方法，研究了工艺参数、刀具参数以及力热耦合对镍基高温合金残余应力分布的影响。研究结果表明：切削深度的改变会同时影响径向和切向的残余应力；每齿进给量的改变主要影响进给方向残余应力；当转速提高时，温度场作用变强，材料出现软化效应，铣削合力降低，热应力影响逐渐增强。采用参数组合配比的方法得到了最优的配比方案。发动机叶片零件加工实例表明，提出的基于参数优化配比的方法可有效控制镍基高温合金的加工残余应力。

关键词: 镍基高温合金, 有限元, 残余应力, 工艺参数, 切削加工工艺

Abstract: The distribution of machining residual stress of nickel-based superalloys had a significant influence on the product quality. To achieve the control method of residual stress, the effects of processing parameters, tool parameters and mechanics-thermal coupling on the residual stress distribution of nickel-based superalloys were studied by means of simulation and experiments. It is found that the change of cutting depth will affect the radial and tangential residual stresses at the same time, and the change of feed rate per tooth mainly affects the residual stress in the feed direction. When the rotating speed increases, the temperature field becomes stronger, the materials are softened, the milling forces are decreased, and the thermal stress is gradually increased. The optimal proportioning scheme is obtained by the method of parameter combination proportioning. Taking the machining of engine blade parts as an example, the method based on parameter optimization may effectively control the residual stress of Nickel-based superalloys.

Key words: nickel-based superalloy, finite element, residual stress, processing parameter, cutting technology

中图分类号:

TH142
TG54

张金阳, 许伟春, 王笑含, 江小辉, 高山. 铣削工艺优化对镍基高温合金加工残余应力分布影响研究[J]. 中国机械工程, 2024, 35(04): 624-635.

ZHANG Jinyang, XU Weichun, WANG Xiaohan, JIANG Xiaohui, GAO Shan. Study on Influences of Milling Process Optimization on Residual Stress Distribution for Machining Nickel-based Superalloys[J]. China Mechanical Engineering, 2024, 35(04): 624-635.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2024.04.006

http://www.cmemo.org.cn/CN/Y2024/V35/I04/624

参考文献

［1］黄新春,张定华,姚倡锋,等. 镍基高温合金 GH4169 磨削参数对表面完整性影响［J］.航空动力学报,2013,28(3):621-628.
HUANG Xinchun,ZHANG Dinghua,YAO Changfeng,et al. Effects of Grinding Paramates on Surface Integrity of GH4169 Nickel-based Superalloy［J］. Journal of Aerospace Power， 2013,28(3):621-628.
［2］王维. 球头铣削热作模具钢表面残余应力研究［D］.济南：山东大学, 2010.
WANG Wei. Study onSurface Residual Stress of Hot Work Die Steel for Ball-end Milling［D］. Jinan：Shandong University,2010.
［3］吴清雨. 高温合金薄壁叶片铣削加工变形基础研究［D］.南京：南京航空航天大学,2016.
WU Qingyu. Basic Research on the Distortion of Super-alloy Thin-wall Blade［D］. Nanjing:Nanjing University of Aeronautics and Astronautics, 2016.
［4］高世民,全芳. GH4169 材料磨削后数控抛光表面残余应力分析［J］.航空制造技术,2017(7):97-100.
GAO Shimin, QUAN Fang. CNC Polishing Surface Residual Stress Analysis for GH4169 after Grinding［J］. Aeronautical Manufacturing Technology， 2017(7):97-100.
［5］HUANG X C, ZHANG D H, SHI K N, et al. Research on the Mechanism of Residual Stress and Its Influence on Fatigue Life in Grinding Superalloy［C］∥2016 International Conference on Mechanics Design, Manufacturing and Automation(MDM 2016)， Suzhou, 2016:418-426.
［6］JIANG X H, ZHU Y H, ZHANG Z Y,et al. Investigation of Residual Impact Stress and Its Effects on the Precision during Milling of the Thin-walled Part［J］. International Journal of Advanced Manufacturing Technology, 2018(97):877-892.
［7］ARUNACHALAM R M, MANNAN M A, SPOWAGE A C. Residual Stress and Surface Roughness When Facing Age Hardened Inconel 718 with CBN and Ceramic Cutting Tools［J］. International Journal of Machine Tools and Manufacture, 2004, 44(9):879-887.
［8］WANG J T, ZHANG D H, WU B H, et al. Residual Stresses Analysis in Ball End Milling of Nickel-Based Superalloy Inconel 718［J］. Materials Research—Ibero-American Journal of Materials,2017, 20(6):1681-1689.
［9］NASRALLA K, SHIHAB S K, MAHMOUD A K, et al. Estimation of Induced Residual Stresses and Corrosion Behavior of Machined Inconel 718 Superalloy:3D-FE Simulation and Optimization［J］. International Journal of Computational Materials Science and Engineering, 2022, 11(1):1-24.
［10］WIMMER M, WOELFLE C H, KREMPASZKY C, et al. The Influences of Process Parameters on the Thermo-mechanical Workpiece Load and the Sub-surface Residual Stresses during Peripheral Milling of Ti-6Al-4V［J］.Procedia CIRP， 2021(102):471-476.
［11］MARIMUTHU K P, KUMAR C S C, PRASADA H P T. 2D Finite Element Thermo-Mechanical Model to Predict Machining Induced Residual Stresses Using ALE Approach［J］. Materials Today:Proceedings, 2018, 5(5):11780-11786.
［12］SUN C, XIU SC, HOMG Y, et al. Prediction onResidual Stress with Mechanical-thermal and Transformation Coupled in DGH［J］. International Journal of Mechanical Sciences, 2020, 179:1-20.
［13］KANAKARAJU V, GUNJAL S, RATHINAM K, et al. Optimization of Cutting Parameters of Residual Stresses in Simultaneous Turning Technique［J］. Materials Today:Proceedings, 2020, 28:2108-2115.
［14］YUE C X, HAO X L, JI X, et al. Analytical Prediction of Residual Stress in the Machined Surface during Milling［J］. Metals, 2020(10):1-20.
［15］SU J C, YOUNG K A, MA K, et al. Modeling of Residual Stresses in Milling［J］. International Journal of Advanced Manufacturing Technology, 2013, 65(5/8):717-733.
［16］YI S H, WU Y X, GONG H, et al. Experimental Analysis and Prediction Model of Milling-Induced Residual Stress of Aeronautical Aluminum Alloys［J］. Applied Science—Basel, 2021, 11(13):1-15.
［17］CHENG M H, JIAO L, YAN P, et al. Prediction of Surface Residual Stress in End Milling with Gaussian Process Regression［J］. Measurement, 2021, 178:1-11.
［18］ZHANG C Y, WANG L X, MENG W Z, et al. A Novel Analytical Modeling for Prediction of Residual Stress Induced by Thermal-mechanical Load during Orthogonal Machining［J］.International Journal of Advanced Manufacturing Technology,2020, 109(1/2), 475-489.
［19］PAN Z P, LIANG S Y, GARMESTANI H ,et al. Residual Stress Prediction Based on MTS Model during Machining of Ti-6Al-4V［J］. Proceedings of Institution of Mechanical Engineers Part C—Journal of Mechanical Engineering Science, 2019, 233(11):3743-3750.
［20］HOFINGER J, ERDLE H, BOHLKE T. Prediction of Residual Stresses of Second Kind in Deep Drawing Using an Incremental Two-scale Material Model［J］. Philosophical Magazine,2020, 100(22)：2836-2856.
［21］ULLAH I, ZHANG S, WAQAR S. Numerical and Experimental Investigation on Thermo-mechanically Induced Residual Stress in High-speed Milling of Ti-6Al-4V Alloy［J］.Journal of Manufacturing Processes， 2022， 76:575-87.
［22］赵娜. 高温合金Inconel625本构模型及切削过程仿真研究［D］. 哈尔滨:哈尔滨理工大学,2016.
ZHAO Na. Study on the Constitutive Model and the Cutting Process Simulation of Super Alloy Inconel625［D］. Harbin :Harbin University of Science and Technology,2016.
［23］周金华. 薄壁结构切削残余应力建模及变形预测［D］.西安：西北工业大学,2018.
ZHOU Jinhua. Modeling of Cutting Residual Stress and Distortion Prediction for Machining Thin-walled Structure［D］. Xian:Northwestern Polytechnical University,2018.
［24］季霞. 微量润滑切削表面残余应力预测建模［D］.上海：上海交通大学,2014.
JI Xia. Predictive Modeling of Residual Stress in Minimum Quantity Lubrication Machining［D］. Shanghai： Shanghai Jiao Tong University,2014.
［25］江小辉. 残余应力生成机理及复杂薄壁件加工精度控制方法研究［D］.上海：东华大学,2014.
JIANG Xiaohui. Investigation on the Mechanism of the Residual Stress and Control Method of Machining Accuracy for the Complex Thin-walled Parts［D］. Shanghai：Donghua University,2014.

[1]	胡超, 刘佐民. 基于材料匹配性的球轴承Heathcote黏-滑模型研究 [J]. J4, 201016, 21(16): 1969-1973.
[2]	董国疆, 赵长财, 曹秒艳, 郝海滨, 杨东峰. 圆筒件固体颗粒介质成形壁厚及变形规律研究 [J]. J4, 201016, 21(16): 1992-1998.
[3]	李燕乐, 潘忠涛, 戚小霞, 崔维强, 陈健, 李方义. 热处理工艺对激光熔覆316L温度场与应力场的影响规律[J]. 中国机械工程, 2024, 35(04): 666-677.
[4]	崔海涛, 钱春华. 镍基高温合金的热机械疲劳寿命预测模型研究[J]. 中国机械工程, 2024, 35(01): 67-73,82.
[5]	刘孝保, 严清秀, 易斌, 姚廷强, 顾文娟. 基于集成学习和改进粒子群优化算法的流程制造工艺参数优化[J]. 中国机械工程, 2023, 34(23): 2842-2853.
[6]	吴泽刚, 侯永峰, 苗清, 李靖, 张定华, 罗明, . TC11钛合金整体叶轮铣削加工表面完整性研究[J]. 中国机械工程, 2023, 34(23): 2862-2872.
[7]	查旭明, 袁智, 秦浩, 袭琳清, 张涛, 姜峰. 钛合金超声冲击强化研究现状及发展趋势[J]. 中国机械工程, 2023, 34(19): 2269-2287.
[8]	赵泽民, 王立华, 黄洪燚, 陈太茂, 蒋维. 动力稳定作业参数对道床稳定性的影响[J]. 中国机械工程, 2023, 34(19): 2313-2319，2369.
[9]	韩锐, 李秀红, 王嘉明, 李文辉, 程思源, 杨胜强, . 水平强制振动光整加工对TC4钛合金表面完整性参数的影响[J]. 中国机械工程, 2023, 34(17): 2037-2047.
[10]	骆文泽, 成慧梅, 刘红艳, 王义峰, 叶延洪, 邓德安. 高强钢Q960E对接接头残余应力与焊接变形的数值模拟[J]. 中国机械工程, 2023, 34(17): 2095-2105,2141.
[11]	郭伟, 曹宏瑞, 訾艳阳, 尉询楷. 滚动轴承接触疲劳裂纹建模与扩展规律研究[J]. 中国机械工程, 2023, 34(16): 1891-1899.
[12]	段凌云, 黄传真, 刘盾, 姚鹏, 刘含莲. 激光辅助水射流加工砷化镓晶片微槽的实验研究[J]. 中国机械工程, 2023, 34(10): 1172-1183.
[13]	李国龙, 朱国华, 蒋林, 陶一杰, 贾亚超. 抑制磨削振纹的多目标磨削工艺参数优化[J]. 中国机械工程, 2023, 34(09): 1086-1092.
[14]	张龙, 张号, 王朝兵, 王晓博, 文培田, 赵丽娟. 显式动力学驱动的轴承变工况故障诊断方法[J]. 中国机械工程, 2023, 34(08): 982-992.
[15]	曹秒艳, 胡晗, 李小钊, 宋鹏飞, 隋宽鹏, 付敏, . 真空灭弧室主屏蔽罩的固体颗粒介质成形工艺[J]. 中国机械工程, 2023, 34(08): 1000-1006.

铣削工艺优化对镍基高温合金加工残余应力分布影响研究

Study on Influences of Milling Process Optimization on Residual Stress Distribution for Machining Nickel-based Superalloys

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics