An Analysis Model for Environmental Impact in Manufacturing Process Based on Eco-indicator 99

China Mechanical Engineering ›› 2010, Vol. 21 ›› Issue (8): 931-935.

Previous Articles Next Articles

An Analysis Model for Environmental Impact in Manufacturing Process Based on Eco-indicator 99

Gu Zhenyu;Liu Fei;Ren Fan

State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing, 400044

Online:2010-04-25 Published:2010-05-05
Supported by:

The National Key Technology R&D Program（No. 2006BAF02A01）;
National Natural Science Foundation of China（No. 50775228）

基于生态指示器99的制造过程环境影响分析模型

谷振宇;刘飞;任凡

重庆大学机械传动国家重点实验室,重庆,400044

基金资助:
“十一五”国家科技支撑计划资助项目(2006BAF02A01)；国家自然科学基金资助项目(50775228)
The National Key Technology R&D Program（No. 2006BAF02A01）;
National Natural Science Foundation of China（No. 50775228）

Abstract

Abstract:

Manufacturing process will produce a wide range of complex environmental impacts. Taking eco-indicator 99 as a reference standard, an analysis model for environmental impact in manufacturing process was presented. Then, the solving processes of the model were described briefly and the environmental impact assessment matrix of a cellular manufacturing process was established. The applicability of this model was demonstrated by an electrical switch cabinet electroplating case. The model can be used to calculate the environmental impact value of manufacturing process which is compatible with the eco-indicator 99. This value can be used to improve the environmental friendliness of manufacturing process and product design programs.

Key words:

green manufacturing, manufacturing process, environment impact, eco-indicator 99

摘要：

针对制造过程环境影响分析中参考评价标准各异,难以进行有效的定量分析等问题,提出了一种基于生态指示器99的制造过程对环境影响的分析模型,并对制造过程环境影响值的计算方法进行了阐述。建立了单元制造过程的环境影响矩阵,从综合值评价、不同排放物的环境影响评价和不同环境效应评价三个方面对制造过程的环境影响进行了分析。最后,结合一个电器开关柜电镀过程对上述方法进行了说明和验证。

关键词:

绿色制造, 制造过程, 环境影响, 生态指示器99

CLC Number:

TH186

GU Zhen-Yu, LIU Fei, LIN Fan.

An Analysis Model for Environmental Impact in Manufacturing Process Based on Eco-indicator 99

[J]. China Mechanical Engineering, 2010, 21(8): 931-935.

谷振宇, 刘飞, 任凡.

基于生态指示器99的制造过程环境影响分析模型

[J]. 中国机械工程, 2010, 21(8): 931-935.

References

[1]Choi A, Kaebernick H, Lai W H. Manufacturing Processes Modeling for Environmental Impact Assessment[J]. Journal of Materials Processing Technology, 1997, 70(1/3) :231-238.
[2]Munoz A, Sheng P. An Analytical Approach for Determining the Environmental Impact of Machining Processes[J]. Journal of Materials Processing Technology, 1995, 53(3/4): 736-758.
[3]Dahmus J B, Gutowski T G. An Environmental Analysis of Machining [C]//2004 ASME Proceedings of International Mechanical Engineering Congress. Anaheim, 2004 : 1-10.
[4]Gutowski T, Dahmus J, Dalquist S. Measuring the Environmental Load of Manufacturing Processes [C]//Proceedings of International Society for Industrial Ecology (ISIE). Stockholm,2005 :12-15.
[5]Tadeusz F. An Environmental Assessment Method for Cleaner Production Technologies[J]. Journal of Cleaner Production, 2007, 15(10) :914-919.
[6]江志刚[1],张华[1],肖明[1].制造过程资源消耗和环境影响分析模型及应用[J].系统工程理论与实践,2008,28(7):132-137.
[7]Li C P, Hui I K. Environmental Impact Evaluation Model for Industrial Processes[J]. Environmental Management, 2001, 27(5):729-737.
[8]刘江龙.绿色制造过程的定量评价方法研究[J].机械工程学报,2002,38(7):58-61.
[9]Goedkoop M, Effting S, Collignon M. The Eeo-- indicator 99--A Damage Oriented Method for Life Cycle Impact Assessmentmanual for Designers [M]. Netherlands: Ministry of Housing, Spatial Planning and the Environment, 2000.
[10]Hui I K. An Environmental Assessment Model Applied to Printed Circuit Board Manufacturing [J]. International Journal of Advanced Manufacturing Technology, 2007, 32(7/8):834-842.
[11]KevinNO,KristinI.W.ProductDesign[M].齐春萍,宫晓东,张帆,等,译.北京:电子工业出版社,2005.
[12]曹华军[1],刘飞[1],阎春平[1],李聪波[1].制造过程环境影响评价方法及其应用[J].机械工程学报,2005,41(6):163-167.
[13]Labouze E. Study on External Environmental Effects Related to the Life Cycle of Products and Services [R]. France: Bio Intelligence Service, European Commission, 2003.

An Analysis Model for Environmental Impact in Manufacturing Process Based on Eco-indicator 99

基于生态指示器99的制造过程环境影响分析模型

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 10

Recommended Articles

Metrics

[1]	TIAN Ying, SHAO Wenting, WANG Taiyong. Energy Footprint Modeling and Parameter Optimization in Workshop Manufacturing Processes [J]. China Mechanical Engineering, 2022, 33(21): 2547-2553.
[2]	ZHOU Haofei1;LIU Yumin2. Real-time Intelligent Monitoring for Manufacturing Processes with Big Data Based on Deep Belief Networks [J]. China Mechanical Engineering, 2018, 29(10): 1201-1207,1213.
[3]	Liu Qiong, Tian Youquan, John W. Sutherland, Zhou Yingdong. Calculation and Optimization of Product Carbon Footprint in Its Manufacturing Processes [J]. China Mechanical Engineering, 2015, 26(17): 2336-2343.
[4]	Cao Huajun, Tong Shaofei, Chen Haifeng, Shu Linsen. Analysis of Remanufacturing Process and Residual Stress of Axis Parts Based on Thermal Spraying [J]. China Mechanical Engineering, 2014, 25(24): 3368-3372.
[5]	Xia Xintao, Qin Yuanyuan, Qiu Ming. Adjustment for the Machining Errors of Machine Tool Based on Grey Bootstrap Maximum Entropy Method [J]. China Mechanical Engineering, 2014, 25(17): 2273-2277.
[6]	Luo Jianqiang, Xuan Juanli, Ma Hanwu. Research on Implementation Postponement Strategy Production System Simulation Based on HTCPN [J]. China Mechanical Engineering, 2014, 25(11): 1466-1472.
[7]	LIN Fan, LIU Fei, LI Cong-Bei, ZHANG Wen-Yuan. State-of-the-art of Machining Dust Researches and Their Framework  [J]. China Mechanical Engineering, 2011, 22(8): 994-1001.
[8]	LIN Xiao-Jun, SHI Yao-Yao, LIN Jun-Hua. High Efficiency NC Machining Technology of Static Blade Ring [J]. China Mechanical Engineering, 2010, 21(22): 2705-2709.
[9]	ZHANG Zhi-Qing, HE Bo-Xia, SHI Jin-Fei, LIU Guo-Liang, ZHANG Jia-Yang, LIU Yang. A Survey of Stream of Variation in Multistage Manufacturing Process [J]. China Mechanical Engineering, 2010, 21(06): 733-741.
[10]	Neural Network. Environmental Impact Evaluation Model of Manufacturing Processes Based on BP [J]. J4, 2009, 20(16): 0-2015.