Research on Meshing Track and Polygon Effect of a New Silent Chain with Inner Meshing Mechanism

Abstract

Abstract:

Based on analysis of the meshing mechanism of a new round-pin jointed silent chain with inner meshing mechanism,the a mathematic model of the inner meshing mechanism silent chain meshing with

different stage was developed based on the coordinate transformation theory.The meshing track of the inner meshing mechanism silent chain was obtained by least-squares fitting, and the motion trail and fluctuation quantity of the chain's tight side between the new inner meshing silent chain and the

traditional outer meshing silent chain were compared and analyzed.The experimental results on a high-speed bench and the calculation results show that the characteristics of the new inner meshing mechanism silent chain include little vibration,low noise,smooth transportation,good wear resistance etc.

Key words: silent chain with inner meshing mechanism, polygon effect, meshing track, mathematical model, over pin dimension

摘要：

在分析新型内啮合圆销式齿形链啮合机理的基础上,利用坐标变换理论建立了内啮合齿形链啮合过程中不同阶段的数学模型，并利用最小二乘法拟合得出了内啮合齿形链的啮合迹线，对比分析了内啮合齿形链和外啮合齿形链紧边中心的运动轨迹和波动量。高速台架试验和计算结果表明，新型内啮合齿形链具有振动小、噪声低、传动平稳和耐磨损性能好等特点。

关键词:

内啮合齿形链, 多边形效应, 啮合迹线, 数学模型, 量柱测量距

CLC Number:

TH132.45

MENG Fan-Zhong, DONG Cheng-Guo, FENG Ceng-Ming, CHENG E-Bing.

Research on Meshing Track and Polygon Effect of a New Silent Chain with Inner Meshing Mechanism

[J]. China Mechanical Engineering, 2011, 22(16): 1891-1895.

孟繁忠, 董成国, 冯增铭, 程亚兵.

新型内啮合齿形链啮合迹线及多边形效应研究

[J]. 中国机械工程, 2011, 22(16): 1891-1895.

References

[1]冯增铭.新型齿形链的啮合机理及动态特性分析[D].长春:吉林大学,2006.
[2]冯增铭 [1],孟繁忠 [2],李纯涛 [1].新型齿形链的啮合机制及仿真分析[J].上海交通大学学报,2005,39(9):1427-1430.
[3]Huang C, Lin K C. Kosasih L. Kinematic Analysis of Chordal Action and Transmission Errors of Silent Chains[J]. SAE Paper, 2006-01-0619.
[4]Weber C, Herrmann W, Stadtmann J. Experimental Investigation into the Dynamic Engine Timing Chain Behaviour[J]. SAE Paper, 980840.
[5]Sopouch M, Hellinger W, Priebsch H H. Simulation of Engine 's Structure Borne Noise Excitation Due to the Timing Chain Drive[J]. SAE Paper, 2002-01- 0451.
[6]孟繁忠.齿形链啮合原理[M].北京:机械工业出版社,2008.
[7]付振明[1,2],金玉谟[1].发动机用内啮合机制齿形链的设计方法和试验研究[J].机械传动,2009,33(6):86-88.
[8]尹德兵 [1],王怀宇 [1],孟繁忠 [2],冯增铭 [2].齿形链链轮量柱测量距与其啮合特性[J].机械设计,2004,21(2):25-27.
[9]李特文.齿轮啮合原理[M].上海:上海科学技术出版社,1984.
[10]陈朝光唐余勇.微分几何及其在机械工程中的应用[M].哈尔滨：哈尔滨工业大学出版社,1998.6-120.
[11]隋思涟,王岩编著.MATLAB语言与工程数据分析[M],2009:274.
[12]孟繁忠[1],董成国[2],冯增铭[2].新型内-外复合啮合齿形链啮合迹线的求解[J].吉林大学学报：工学版,2009(4):970-975.
[13]Pan M,Shieh T. Design Modification for Reducing Silent Chain Annoying Noise[J]. Journal of Me- chanical Design,2002,124(12) :822-827.
[14]Meng Fanzhong, Feng Zengming,Chu Yuxu. Meshing Theory and Design Method of New Silent Chain and Sprocket [J]. Chinese Journal of Mechanical Engineering, 2006,19 (3) : 425-427.
[15]杨国欣,刘乃庆.链传动多边形效应分析[J].农业与技术,1996(3):40-42.