Influences of High-low Blade on Performance of Vortex Pumps

Abstract

Abstract:

A 3-D model of an internal flow channel was constructed. Using the SIMPLEC algorithm, which was based on Reynolds time-averaged equations and two-equation turbulent flow model, the 3-D incompressible internal turbulent flow field of vortex pump was simulated numerically and the distribution of total pressure in the pump was obtained. Through comparion of the simulated results of three kind blades that were different in height, it is found that the high-low blade can improve the performance of vortex pump.The results show that the experiment has proved the correctness of simulation result. The high-low blade can reduce hydraulic loss and increase the head and efficiency. The hydraulic performance is the best when two blades of symmetric distribution are high than others and efficiency is enhanced nearly 3%.

Key words: vortex pump, high-low blade, numerical simulation, experiment

摘要：

通过对旋流泵内部流道进行三维造型，利用雷诺时均方程、双方程湍流模型并结合SIMPLEC算法对旋流泵内部三维不可压缩湍流场进行数值模拟，得出旋流泵内部的压力分布。通过对三种不同高度差的弯曲叶片模拟结果进行对比，发现高低叶片能够改善旋流泵水力性能。在模拟的基础上进行了试验研究，结果表明：模拟结果是正确的;高低叶片能够减小水力损失，提高旋流泵的扬程和效率;3种叶轮中，2个对称分布叶片比其余4个叶片高的叶轮的水力性能最好，效率提高约3%。



关键词:

旋流泵, 高低叶片, 数值模拟, 试验

CLC Number:

WANG Xiu-Li-1, SHU Rong-Sheng-1, SHU Zhi-Jun-2, SU Bao-Wen-1.

Influences of High-low Blade on Performance of Vortex Pumps

[J]. China Mechanical Engineering, 2011, 22(17): 2030-2033.

王秀礼1, 朱荣生1, 俞志君2, 苏保稳1.

高低叶片对旋流泵性能影响的研究

[J]. 中国机械工程, 2011, 22(17): 2030-2033.

[1]	TUN Fu-Chao, TUN Bai-Hu, ZHANG Xiu-Hua. Numerical Simulation of Heat Transfer Performance of Paraffin Thermal-Sensitive Valve  [J]. J4, 201016, 21(16): 1921-1926.
[2]	LI Yanle, PAN Zhongtao, QI Xiaoxia, CUI Weiqiang, CHEN Jian, LI Fangyi. Effect of Heat Treatment on Temperature and Stress Distribution during Laser Cladding of 316L Steels [J]. China Mechanical Engineering, 2024, 35(04): 666-677.
[3]	PENG Wenfei, ZHANG Cheng, LIN Longfei, HUANG Minghui, YU Feng. Modeling and Prediction of Central Damages in Cross Wedge Rolling Based on Continuous Damage Mechanics [J]. China Mechanical Engineering, 2024, 35(04): 711-720,751.
[4]	LI Kunhang, ZHANG Siqi, WU Wei, HU Mingzhuo, SUN Yaling, XIONG Xin, HUANG Hong. Multi-field Coupling Simulation and Analysis for Resistance Spot Welding of Three-layer Dissimilar Unequal-thickness Steels [J]. China Mechanical Engineering, 2023, 34(24): 2996-3003.
[5]	LUO Wenze, CHENG Huimei, LIU Hongyan, WANG Yifeng, YE Yanhong, DENG Dean. Numerical Simulation of Residual Stress and Welding Deformation for High Strength Steel Q960E Butt-welded Joints [J]. China Mechanical Engineering, 2023, 34(17): 2095-2105,2141.
[6]	XU Xiang, ZHANG Yilun, MEI Zheng, LI Jian, WANG Dan, MU Liansong. Numerical Simulation and Experimental Investigation of Flow Fields in Vehicle Climatic Chambers [J]. China Mechanical Engineering, 2023, 34(17): 2115-2123.
[7]	ZHU Yulong, ZHAO Yingsong, FANG Yang, CHEN Hongen, CHEN Zhenmao, . Rotating Eddy Current Testing for Inspection of Cracks at Hole Edge [J]. China Mechanical Engineering, 2023, 34(08): 883-891.
[8]	QIN Deng, DAI Zhiyuan, ZHOU Ning, LI Tian. Effects of Pantograph Subsidence on Its Aerodynamic and Acoustic Behaviors [J]. China Mechanical Engineering, 2022, 33(20): 2509-2519.
[9]	LI Wei, ZHENG Hao, LIU Yanmei, FAN Song. Numerical Simulation on Mounted Bolt Failures in Vehicle Subframe [J]. China Mechanical Engineering, 2022, 33(19): 2388-2393.
[10]	HU Futai, . Cracking Suppression and Lateral Bending Broadening Strategy of Fan-shaped Thin-wall Ribs during Extrusion [J]. China Mechanical Engineering, 2022, 33(14): 1734-1740.
[11]	MA Yi, CHEN Yutao, MENG Xiangkai, ZHAO Wenjing, PENG Xudong, . Transient Start-up Dynamics Model and Sealing Performance of Single Metal Seals in Cone Bits [J]. China Mechanical Engineering, 2022, 33(07): 777-785.
[12]	XU Mingsan, ZHOU Chunhui, ZHANG Zheng, ZENG Shoujin, . Temperature Distribution of Powder-gas-optical Coupling temperature field in Laser Cladding Processes [J]. China Mechanical Engineering, 2022, 33(01): 70-77.
[13]	PAN Chengyi, TONG Yuanqi, CAO Guanqun, ZHAO Yanling. Research on Friction and Wear Characteristics and Simulation of Microstructures Surface Unfolding Wheels [J]. China Mechanical Engineering, 2021, 32(22): 2689-2696.
[14]	ZHU Qian, YOU Dongdong, ZHU Quanli, . Dynamic Fit of Injection Mechanisms for Squeeze Casting Machines Based on Friction Model#br# [J]. China Mechanical Engineering, 2021, 32(12): 1405-1413.
[15]	YIN Hongchao, LIU Xiao, ZHAI Zhende, MU Lin. Numerical Simulation of Abrasive Flow Machining in Multi-angle Elbows [J]. China Mechanical Engineering, 2021, 32(11): 1299-1306.