China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (19): 2359-2364.

Previous Articles     Next Articles

Research on Design Method of Active Disassembly Products and Design Criterion Based on Electro and Heat Stimulation

Liu Zhifeng1;Cheng Huanbo1;Li Xinyu1;Zhao Liuxian1;Zhang Hongchao1,2
  

  1. 1.Hefei University of Technology, Hefei, 230009
    2.Texas Technology University, Texas, 79409
  • Online:2011-10-10 Published:2011-10-12
  • Supported by:
     
    National Natural Science Foundation of China（No. 50775064）;
    Key Program of National Natural Science Foundation of China（No. 50735006）;
    The National Key Technology R&D Program（No. 2008BAC46B01）

基于电热激发的主动拆卸产品设计方法及其设计准则研究

刘志峰1;成焕波1;李新宇1;赵流现1;张洪潮1,2
  

  1. 1.合肥工业大学,合肥,230009
    2.德克萨斯理工大学,德克萨斯,79409
  • 基金资助:
    国家自然科学基金资助项目(50775064)；国家自然科学基金资助重点项目(50735006)；“十一五”国家科技支撑计划项目(2008BAC46B01) 
    National Natural Science Foundation of China（No. 50775064）;
    Key Program of National Natural Science Foundation of China（No. 50735006）;
    The National Key Technology R&D Program（No. 2008BAC46B01）

PDF

Abstract:

The paper put forward to active disassembly, multi-step active disassembly methods and design criteria based on electro and heat stimulation. General design method of active disassembly product based on electro and heat stimulation was explained through the case analysis. Finite element analysis results are compared with experimental ones, electro and heat stimulation experiments were compared with the traditional heat stimulation experiments, and then the feasibility of method was proved. Active disassembly method and the design criterion were used in active disassembly design of products, disassembly efficiency for products are improved obviously.

Key words:

摘要：

首先提出了基于电热激发的主动拆卸方法、多级主动拆卸方法及其设计准则,结合实际案例分析,说明了基于电热激发的主动拆卸产品的一般设计方法;将有限元分析结果与实验结果、电热激发实验与传统的热激发实验进行对比,验证了电热激发方法的可行性,并将这些方法及其设计准则用于产品的主动拆卸设计,明显提高了产品的拆卸效率。

关键词:

CLC Number: 

鄂ICP备11005124号
Copyright © China Mechanical Engineering, All Rights Reserved.
Tel: 027-59750772，88011893　E-mail: paper@cmemo.org.cn
Powered by Beijing Magtech Co., Ltd.