Discussion on Several Problems for Chaotic Metal Transfer in Arc Welding

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (19): 2365-2369.

Previous Articles Next Articles

Discussion on Several Problems for Chaotic Metal Transfer in Arc Welding

Lü Xiaoqing;Song Haifeng

Tianjin University,Tianjin,300072

Online:2011-10-10 Published:2011-10-12
Supported by:
Specialized Research Fund for the Doctoral Program of Higher Education of China（No. 20090032120023）

弧焊熔滴过渡混沌的若干问题探讨

吕小青;宋海凤

天津大学,天津,300072

基金资助:
高等学校博士学科点专项科研基金资助项目(20090032120023)
Specialized Research Fund for the Doctoral Program of Higher Education of China（No. 20090032120023）

Abstract

Abstract:

The drawback in mathematic model of metal transfer was analyzed, and it was the attention being only paid to droplet movement of different stages in a single transfer period. According to the related chaos theory and the related chaotic movement characteristics in dripping faucet,a establishing chaotic model can reflect better in essence the metal transfer is put forward. The progresses of chaotic research on drop transfer and short circuiting transfer were introduced and the problem was pointed out that an accurate chaotic model is needed urgent to be established at present. The developments in different chaotic control objectives of arc welding in the future were prospected.

Key words:

arc welding, metal transfer, chaotic model, chaotic control

摘要：

探讨指出现今弧焊熔滴过渡数学模型中存在只关注于单个周期内不同过渡阶段熔滴的特征行为,而忽略过渡周期之间关联特性的不足。通过叙述相关的混沌基本概念,以及结合滴水龙头混沌的相关运动规律,提出建立弧焊混沌数学模型在本质上能更真实地反映熔滴过渡过程。介绍了滴状过渡和短路过渡中混沌研究现状,指出目前急需解决的问题是建立精确的混沌数学模型。展望了弧焊在不同混沌控制目标中的应用前景。



关键词:

弧焊, 熔滴过渡, 混沌数学模型, 混沌控制

CLC Number:

TG434
O415.5

LV Xiao-Jing, SONG Hai-Feng.

Discussion on Several Problems for Chaotic Metal Transfer in Arc Welding

[J]. China Mechanical Engineering, 2011, 22(19): 2365-2369.

吕小青, 宋海凤.

弧焊熔滴过渡混沌的若干问题探讨

[J]. 中国机械工程, 2011, 22(19): 2365-2369.

References

[1]Simpson S W. Metal Transfer Instability in Gas Metal Arc Welding[J]. Science and Technology of Welding and Joining,2009,14(4) :262-273.
[2]吕小青.co<,2>焊短路过渡的混沌性探索 [D].华南理工大学,2006:
[3]Kim Y S,Eagar T W. Analysis of Metal Transfer in Gas Metal Arc Welding[J]. Welding Journal, 1993, 72(6) :269-278.
[4]Zhu Z M,Wu W,Chen Q. Random Nature of Drop let Size and Its Origins in Short Circuit CO2 Arc Welding[J]. Science and Technology of Welding and Joining, 2005,10 (6) : 636-642.
[5]Lin Q, Li X, Simpson S W. Metal Transfer Meas urements in Gas Metal Arc Welding[J]. Journal of Physics D: Applied Physics, 2001 , 34 ( 3 ) : 347-353.
[6]武传松著.焊接热过程与熔池形态[M].北京:机械工业出版社,2008:270.
[7]Wu C S, Chen M A, Li S K. Analysisi of Exicted Droplet Oscillation and Detachment in Active Con- trol of Metal Transfer[J]. Computational Materials Science,2004,31(1/2) : 147-154.
[8]刘秉正,彭建华编著.非线性动力学[M],2004:589.
[9]吕金虎 ... [等].混沌时间序列分析及其应用[M],2002.
[10]Shaw R. The Dripping Faucet as a Model Chaolic System[M]. California: Aerial Press, 1984.
[11]D' Innocenzo A, Renna L. Hopf Bifurcation and Quasiperiodicy in a Simulation Model of the I.eaky Faucet[J]. Physical Review E, 1998,58(5) : 6847-6850.
[12]D' Innocenzo A, Renna L. Modeling Leaky Faucet Dynamies[J]. Physical Review E, 1997, 55 (6): 6776-6790.
[13]Watkins A D,Smartt H B,Johnson J A. Dynamic of Droplet Growth and Detachment in GMAW [C]//In 3th International Conference on Trends in Welding Research. Tennessee, USA, 1992:993- 997.
[14]Lesnewich A. Control of Melting Rate and Metal Transfer in Gas- shielded Metal- are Welding. Part Ⅰ. Control of Electrode Melting Rate[J]. Welding Journal, 1958,37 (8) : 343-353.
[15]Halmoy E. Wire Melting Rate, Droplet Tempera- ture,and Effective Anode Melting Potential[C] // The Welding Institute, International Conference: Arc Physics and Weld Pool Behaviour. London, 1979:49-57.
[16]Tolle C R,Laviolette R A,Smaru H B, et al. Is There Evidence of Determinism in Droplet Detach ment within the Gas Metal Arc Welding Process [C]//Proceeding of the 6th International Confer ence on Trends in Welding Reasearch. Columbus, Ohio, USA, 2002 : 380-385.
[17]傅希圣[1],李烨[2].焊丝熔化率公式研究[J].焊接学报,1995,16(4):226-232.
[18]吕小青[1],曹彪[1],曾敏[1],黄石生[1].短路过渡电弧的关联维数分析[J].焊接学报,2005,26(6):65-68.
[19]吕小青[1],曹彪[1],曾敏[1],黄石生[1],刘晓光[1].确定延迟时间互信息法的一种算法[J].计算物理,2006,23(2):184-188.
[20]曹彪[1],吕小青[1],曾敏[1],王振民[1],黄石生[1].短路过渡电弧焊电流信号的近似熵分析[J].物理学报,2006,55(4):1696-1705.
[21]Lv X Q,Cao B, Zeng M,et al. Study on Chaos in Short Circuit Gas Metal Arc Welding Process[J]. China Welding,2007,16(2) :77-80.
[22]曹彪[1],吕小青[1],曾敏[1],黄石生[1].基于近似熵的短路过渡焊接规范分析[J].机械工程学报,2007,43(10):50-54.

Discussion on Several Problems for Chaotic Metal Transfer in Arc Welding

弧焊熔滴过渡混沌的若干问题探讨

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

[1]	TU Gang, CAO Rui, CHEN Jian-Gong. Microstructure and Mechanical Properties of CMT Welding-brazing Joint for Dissimilar Materials between Aluminums and Galvanized Steels [J]. China Mechanical Engineering, 2012, 23(21): 2625-2629.
[2]	LI Hai-Li, GENG Li, TUN Hong-Yan. Influences of Welding Parameters on Weld Appearance of Friction Stir Welding [J]. China Mechanical Engineering, 2011, 22(14): 1737-1741.
[3]	Wang Yong Wang Bao. Analysis and Evaluation for Usability-Stability of the Stainless Steel Covered Electrode [J]. China Mechanical Engineering, 2008, 19(2): 245-248.