A Global Calibration Method for Multisensor Metrology System

Abstract

Abstract:

Focusing on multisensor metrology system consisting of trigger and arm laser scanner in a complex surface part manufacturing process,a global calibration method was proposed based on hexahedron.The global calibration mathematical model based on unit quaternion method was constructed.Aiming to determine the optimal rigid transformation matrix,mathematical morphology was applied to cluster analysis on unit quaternion sphere.The simulation and industrial examples demonstrate this method is convenient,accurate and be fit for on machine metrology system calibration.

Key words: multisensor metrology, global calibration, unit quaternion, point cloud, mathematical morphology

摘要：

针对复杂曲面零件加工中由触发式测头－关节臂激光扫描仪组成的多传感器测量系统，提出了六面体零件作为模板的全局标定方法,建立了基于单位四元数的全局标定数学模型,并用数学形态学方法在单位四元数球上进行聚类分析以确定最优的刚体变换矩阵。仿真和试验结果表明，该方法应用简单、鲁棒性好、精度高，适用于加工现场的在机测量系统标定。


关键词: 多传感器测量, 全局标定, 单位四元数, 点云数据, 数学形态学

CLC Number:

TH706

MAO Lu-Xi, YIN Zhou-Beng, XIONG Wei-Lun. A Global Calibration Method for Multisensor Metrology System[J]. China Mechanical Engineering, 2012, 23(12): 1428-1432.

牟鲁西, 尹周平, 熊有伦. 一种多传感器测量系统全局标定方法[J]. 中国机械工程, 2012, 23(12): 1428-1432.

References

[1]Liu Zhen, Zhang Guangjun, Wei Zhenzhong, et al. A Global Calibration Method for Multiple Vision Sen- sors Based on Multiple Targets [J]. Measurement Science and Technology, 2011,22 (12) : 1-10.
[2]Chen L C,Lin G C. A Vision--aided Reverse Engi- neering Approach to Reconstructing Free- form Surfaces [J]. Robotics and Computer -- integrated Manufacturing, 1997,13 (4) : 323-336.
[3]刘国忠[1],王伯雄[1],史辉[1],罗秀芝[1],张明照[1],王瑞[1].足部三维测量系统中CCD传感器的全局标定[J].光学精密工程,2007(7):1124-1129.
[4]张洪涛[1],段发阶[1],王学影[1],叶声华[1].多传感器视觉测量系统坐标统一技术研究[J].传感技术学报,2006,19(4):1301-1304.
[5]Bradley C, Chan V. A Complementary Sensor Ap proach to Reverse Engineering[J]. Journal of Manu facturing Science and Engineering, 2001,123 ( 1 ) : 74- 82.
[6]魏振忠[1],孙文[1],张广军[1],任少盟[1].激光跟踪视觉导引测量系统的全局校准方法[J].仪器仪表学报,2009(11):2262-2267.
[7]Shen T S,Huang J B,Menq C H. Multiple--sensor Integration for Rapid and High--precision Coordi- nate Metrology[J]. IEEE/ASME Mechatronics, 2002,5(2) : 110-121.
[8]杨雪荣[1],张湘伟[1],成思源[1],唐克伦[2].三坐标测量机与线结构光传感器集成系统的测量模型[J].中国机械工程,2009(9):1020-1023.
[9]陈宇[1],白征东[1].基于非线性最小二乘算法的空间坐标转换[J].大地测量与地球动力学,2010(2):129-132.
[10]Lewis D W. Quaternion Algebras and the Alge- bradic Legacy of Hamilton's Quaternions [ J ]. Irish Mathematical Society Bulletin, 2006,57: 41- 64.
[11]熊有伦等著.机器人操作[M].武汉:湖北科学技术出版社,2002:315.
[12]张小明[1],朱利民[1],丁汉[1],赵灿[2].五轴加工刀具姿态球面NURBS曲线设计及优化[J].机械工程学报,2010(17):140-144.

[1]	JIANG Shikuo, WANG Xiaoping, WANG Kai, JIN Jiang. Fixed-angle Method for Examines Automatic Fiber Placement Based on Point Cloud Surfaces [J]. China Mechanical Engineering, 2023, 34(21): 2629-2636,2645.
[2]	XUE Kai, GUO Runlan, HUANG Huiyang, HUANG Hua. Structural Optimization Method of Additive Manufacturing Model Based on Point Cloud Data [J]. China Mechanical Engineering, 2023, 34(20): 2482-2488.
[3]	SHI Xiaobo, ZHAO Dingxuan, KONG Zhifei, NI Tao, ZHAO Xiaolong, GUO Qinghe. Vehicle High-precision Positioning Technique Based on Multi-sensors Information Fusion [J]. China Mechanical Engineering, 2022, 33(19): 2381-2387.
[4]	YU Hao, HUANG Huagui, ZHENG Jiali, ZHAO Tielin, ZHOU Xinliang. Non-contact On-line Inspection Method for Surface Defects of Cross-rolling Piercing Plugs for Seamless Steel Tubes [J]. China Mechanical Engineering, 2022, 33(14): 1717-1724.
[5]	AI Qingbo, ZHANG Jie, CHENG Hui, LYU Youlong, ZUO Liling, HU Lan. Analysis for Roll-bending Forming Quality of Spaceflight Thin-walled Cylindrical Workpieces Based on PointCPP-LSF Method#br# [J]. China Mechanical Engineering, 2022, 33(08): 977-985.
[6]	ZHANG Yiming, LI Hongwei, ZHAO An'anX, IE Qian, WANG Jun. Local Scanning Point Cloud Localization of Aircraft Skins Based on Multi-descriptor Voting [J]. China Mechanical Engineering, 2021, 32(22): 2724-2730,2771.
[7]	SHI Hongxia, WANG Jianmin. Feature Line Extraction for Point Cloud Based on Normal Vector Region Clustering Segmentation [J]. China Mechanical Engineering, 2021, 32(21): 2552-2561.
[8]	SUN Dianzhu1;SHEN Jianghua1;JIA Zongfu1;LI Yanrui2;LIN Wei1. Scattering Point Cloud Local Topography Frame Quantization and Feature Recognition Method [J]. China Mechanical Engineering, 2020, 31(19): 2332-2339.
[9]	ZHANG Yucun, XU Fei, FU Xianbin. Noise Cancellation Algorithm Method Combinated Priori Probability with Curve Probability Threshold Segmentation [J]. China Mechanical Engineering, 2017, 28(08): 936-940,945.
[10]	Gong Tingkai, Yuan Xiaohui, Wang Xiyang. Applications of Mathematical Morphology Method to Fault Feature Extraction of Rolling Bearings Based on Minimum Entropy Deconvolution [J]. China Mechanical Engineering, 2016, 27(18): 2467-2471.
[11]	Wu Fuzhong. Tool Path Planning for Point Cloud Surface Based on LS-SVM [J]. China Mechanical Engineering, 2014, 25(6): 766-770.
[12]	Li Qidong, Li Wenlong, Zhou Liping. A Surface Feature-Preserving Point Cloud Simplification Method for Aviation Blades [J]. China Mechanical Engineering, 2014, 25(16): 2204-2212.
[13]	Wang Haizhou, Zhang Liyan, Zhou Liangming, Liu Shenglan. Rapid Reverse Modeling of Batched Complex Blanks [J]. China Mechanical Engineering, 2014, 25(14): 1935-1940.
[14]	Zheng Hongbo, Zhang Jiangwen, Tan Xiaojun, Qin Xujia, Chen Songhui. Quadric Surface Geometry Measurement Method for Point Clouds [J]. China Mechanical Engineering, 2014, 25(11): 1545-1549.
[15]	Li Huan, Zhang Liyan, Zhou Liangming, Liu Shenglan. A Hierarchical and Fast Algorithm of Constrained Registration for Complex Blanks with Small Machining Allowance [J]. China Mechanical Engineering, 2014, 25(11): 1524-1529,1561.