[1]周晖, 孙京, 温庆平, 等. 谐波减速器空间润滑及性能研究[J]. 宇航学报, 2009, 30(1):378-381.
Zhou Hui,Sun Jing,Wen Qingping,et al. Lubrication and Performance of Harmonic Drive Used in Spacecraft[J]. Journal of Astronautics, 2009,30(1): 378-381.
[2]何卫东,李力行,李欣. 机器人用高精度RV减速器中摆线轮的优化新齿形[J]. 机械工程学报,2000, 36(3):51-55.
He Weidong, Li Lixing, Li Xin. New Optimizen Tooth-profile of Cycloidal Gear of High Precision RV Reducer Used in Robot[J]. Journal of Mechanical Engineering, 2000, 36(3):51-55.
[3]李新年. 高精度少齿差减速器的传动回差精度控制[J]. 船舶工程, 2003, 25(6):28-30.
Li Xinnian. Accuracy Control of Driving Backlash of Speed-reducer with High Accuracy and Low Gear-tooth Error[J]. Ship Engineering, 2003, 25(6):28-30.
[4]Furuya N, Toba H, Oguri T, et al. Backlash Compensation of Reduction Gears by Twin Motor Cooperative Control (1st report)-Study on Compensation Method Using Backlash Model[J]. Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2007, 73(4): 502-506.
[5]Furuya N, Toba H, Oguri T, et al. Backlash Compensation of Reduction Gears by Twin Motor Cooperative Control (2st report)-Study on Compensation Method Using Backlash Model[J]. Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2008, 74(10): 1107-1112.
[6]Kalantari R. Backlash Nonlinearity Modeling and Adaptive Controller Design for an Electromechanical Power Transmission System[J]. Scientia Iranica, 2009, 16(6):463-469.
[7]Warnecke M, Jouaneh M. Backlash Compensation in Gear Trains by Means of Open-loop Modification of the Input Trajectory[J]. Journal of Mechanical Design, 2003, 125(3):620-624.
[8]许洪基, 陶燕光, 雷光. 齿轮手册:上册[M]. 第2版.北京:机械工业出版社, 2007.
[9]王家序. 滤波减速器:中国, CN101725673A[P]. 2010-06-09.
[10]鲍培德, 谢俊, 尹小琴, 等. 行星齿轮变速传动的弹流润滑研究[J]. 润滑与密封, 2011, 36(2):12-16.
Bao Peide, Xie Jun, Yin Xiaoqin, et al. Study on Elastohydrodynamic Lubrication of Planetary Gear Transmission[J]. Lubrication Engineering, 2011, 36(2):12-16.
[11]Zhu D, Ren N, Wang Q. Pitting Life Prediction Based on a 3-D Line Contact Mixed EHL Analysis and Subsurface Von Mises Stress Calculation[J]. ASME Journal of Tribology, 2009, 131:1-8.
|