Analysis and Optimization of Configuration Path for Customized Manufacturing System Based on Dynamic Cloud Manufacturing

Abstract

Abstract:

Aimed at rapid built cloud-based manufacturing system on engineering spot, configuration path of cloud manufacturng which satisfied demands of customized production was analyzed. This configuration path was a circle that started leading leaguer and ended leading leaguer. Factors which cloud manufacturing leaguers were selected were analyzed, factors were turned into dimensionless numbers. Configuration path was altered in order to adapt dynamic planning and factors were weighted functions in dynamic planning, so optimization mode of cloud manufacturng configuration path was gained and it could use dynamic planning and LINDO to optimize.Finally,an example was discussed.

Key words: configuration path, optimization, dynamic cloud manufacturing, dynamic planning

摘要：

针对如何在工程现场快速而简单地组建基于云的制造系统这一问题，通过分析适应定制生产要求而组建的基于动态云制造的组态，发现其组态是一个以动态云制造云发起者为起终点的、具有若干阶段的封闭环;通过分析选择动态云制造成员时需考虑的因素，将指标转化为一个体现用户要求的量纲一量;通过对动态云制造组态进行改造，将其改造为适用动态规划的层次结构，然后将体现用户要求的量纲一量作为动态规划的权引入路径优化，从而得到了可以利用动态规划方法和LINDO软件进行优化的组建动态云制造时成员选择的优化模型;最后，讨论了一个具体例子。

关键词: 组态, 优化, 动态云制造, 动态规划

CLC Number:

TH164
TH181

Shang Xin, Yin Guofu. Analysis and Optimization of Configuration Path for Customized Manufacturing System Based on Dynamic Cloud Manufacturing[J]. China Mechanical Engineering, 2014, 25(7): 906-910.

尚欣, 殷国富. 基于动态云制造的定制加工系统组态分析及优化[J]. 中国机械工程, 2014, 25(7): 906-910.

References

[1]Lee Jay.关于未来制造业的战略思考[J].中国机械工程,1999,10(4):361-368.
Lee Jay. Next-generation Manufacturing:Strategies for a Global Leadership[J]. China Mechanical Engineering, 1999, 10(4): 361-368.
[2]李敏,徐福缘,顾新建.大批量定制及其产品与过程集成优化模型研究[J].中国机械工程，2002,13(9):762-764.
Li Min,Xu Fuyuan,Gu Xinjian.Mass Customization and Its Production-process Integrated Optimization Model[J]. China Mechanical Engineering, 2002,13(9):762-764.
[3]吴锡英，仇晓黎.从成组技术到大规模定制生产[J].中国机械工程,2001,12(3):319-321.
Wu Xiying,Qiu Xiaoli.From GT to Mass-customization[J]. China Mechanical Engineering, 2001,12(3):319-321.
[4]李伯虎，张霖，王时龙，等.云制造—面向服务的网络化制造新模式[J]. 计算机集成制造系统,2010,16(1): 1-7.
Li Bohu, Zhang Lin, Wang Shilong, et al. Cloud Manufacturing:a New Service-oriented Networked Manufacturing Model[J]. Computer Integrated Manufacturing Systems, 2010,16(1): 1-7.
[5]陶飞, 张霖, 郭华. 云制造特征及云服务组合关键问题研究[J]. 计算机集成制造系统, 2011，17(3):477-486.
Tao Fei, Zhang Lin, Guo Hua. Typical Characteristics of Cloud Manufacturing and Several Key Issues of Cloud Service Composition[J]. Computer Integrated Manufacturing Systems, 2011， 17(3):477-486.
[6]沈斌, 齐党进,樊留群.基于面向服务体系结构的制造企业协同化工程支持技术[J]. 计算机集成制造系统, 2011，17(4): 876-881.
Shen Bin, Qi Dangjin, Fan Liuqun. Collaborative Engineering Supporting Technology for Manufacturing in SOA[J]. Computer Integrated Manufacturing Systems, 2011, 17(4):876-881.
[7]Talluri S, Baker R C. A Quantitative Framework for Designing Efficient Business Process Alliance[C]//IEMC Proceedings. Vancouver,1996:656-660.
[8]Saaty T L. The Analytic Hierarchy Process[M].NewYork:McGraw-Hill,1980.
[9]Meade L M, Liles D H, Sarkis J. Justifying Strategic Alliances and Partnering: a Prerequisite for Virtual Enterprising[J]. Omega, 1997,25(1):29-42.
[10]刘家学,郑昌义.多阶段多指标决策的理想方案法[J].系统工程理论与实践,2001,21(1):61-64.
Liu Jiaxue,Zheng Changyi. The Ideal Scheme Method for the Multiplestage and Multiple Attribute Decision Making[J]. Systems Engineering-Theory & Practice, 2001,21(1):61-64.
[11]刘家学.时序多指标决策的灰色关联分析[J].运筹与管理,1997,6(3):6-10.
Liu Jiaxue. The Method of Grey Relational Analysis for Multi-attribute Decision Making with Time Series[J].Opeations Research and Management Science, 1997,6(3):6-10.
[12]王应明.多指标决策与评价的新方法—投影法[J].系统工程与电子技术,1999,21(3):1-4.
Wang Yingming.A New Method for Multiindicies Decision and Evaluation—a Projection Method[J]. Systems Engining and Eltronics, 1999,21(3):1-4.
[13]Johnson M, Meade L, Rogers K J. Partner Selection in the Agile Environment[C]//4th Agility Forum Conference Proceedings. Bethlehem, 1995:490-505.
[14]尚耀华，万威武.基于图论的虚拟企业制造伙伴选择优化算法[J].系统工程学报，2006, 21 (4): 375-380.
Shang Yaohua, Wan Weiwu. Research on Selection Method for Manufacturing Partners of Virtual Enterprise Based on Theory of Graph[J]. Journal of Systems Engineering, 2006, 21(4): 375-380.
[15]樊树海，肖田元，乔桂秀，等.大规模定制生产线的动态网络构造与仿真[J].系统仿真学报，2004,16(7):1597-1599.
Fan Shuhai,Xiao Tianyuan,Qiao Guixiu, et al. Building the Dynamic Network of Mass Customization[J]. Journal of System Simulation, 2004,16(7):1597-1599.