[1]刘志东,高长水. 电火花加工工艺及应用[M]. 北京: 国防工业出版社, 2011.
[2]高素芳,孙保锋,王刚,等. 大锥度高速走丝线切割机床四连杆机构及控制软件的开发[C]//第12届全国特种加工学术会议. 长沙, 2007:4.
[3]陆霖琰,刘志东,田宗军,等. 高速走丝电火花线切割工作液失效研究[J]. 中国机械工程, 2011, 22(15): 1793-1797.
Lu Linyan, Liu Zhidong, Tian Zongjun, et al. Research on Cooling Liquid Failure of WEDM-HS[J]. China Mechanical Engineering, 2011, 22(15): 1793-1797.
[4]步丰林,李明辉. 超大厚度电火花线切割工艺研究[J]. 上海交通大学学报, 1996, 30(9): 124-128.
Bu Fenglin, Li Minghui.Technology Research of High Thickness HSWEDM Cutting[J]. Journal of Shanghai Jiaotong University, 1996, 30(9): 124-128.
[5]刘志东. 高速走丝电火花线切割工作液的性能要求及研究方向[J]. 航空精密制造技术, 2005, 41(3): 38-39.
Liu Zhidong. Research on the General Feature of Emulations and Dielectrics and Its Iendency in WEDM-HS[J]. Aviation Precision Manufacturing, 2005, 41(3): 38-39.
[6]张伟,陈文义. 流体力学[M]. 天津:天津大学出版社, 2009.
[7]范圣耀,张秋菊,陈海卫. 电火花线切割电极丝动态特性研究[J]. 机械科学与技术, 2012, 31(5): 771-777.
Fan Shengyao, Zhang Qiuju, Chen Weihai. Reviewing Dynamic Characteristics of Electrode Wire of Wire-cut Electrical Discharge Machining[J]. Mechanical Science and Technology, 2012, 31(5): 771-777.
[8]刘志东,潘阳,李谢峰,等. 往复走丝电火花线切割机床工艺特点及现状[J]. 电加工与模具, 2012(6): 60-64.
Liu Zhidong, Pan Yang, Li Xiefeng, et al. Process Characteristics and Status of High Speed Wire-cut Electrical Discharge Machine [J]. Electromachining & Mould, 2012(6): 60-64.
[9]刘志东,王振兴,张艳,等. 高速走丝电火花线切割高效切割技术研究[J]. 中国机械工程, 2011, 22(4): 385-389.
Liu Zhidong, Wang Zhenxing, Zhang Yan, et al.Efficient Cutting of High Speed Wire-Cut Electrical Discharge Machining by Liquid Spray[J]. China Mechanical Engineering, 2011, 22(4): 385-389.
[10]郭钟宁,李大超,俞大民,等. 电火花线切割加工中线电极的动态特性仿真与实验研究[J]. 中国机械工程, 2000,11(7): 32-36.
Guo Zhongning, Li Dachao, Yu Daming, et al.Dynamic Characteristics of the Simulation and Experimental Research of Wire Electrode in WEDM-HS[J]. China Mechanical Engineering, 2000,11(7): 32-36.
[11]刘志东,俞容亨. 高速走丝电火花线切割机床多次切割的实现[J]. 中国机械工程, 2007, 18(20): 2410-2413.
Liu Zhidong, Yu Ronghen.Realization of Multi-cutting in WEDM-HS[J]. China Mechanical Engineering, 2007, 18(20): 2410-2413.
[12]张艳. 高速走丝电火花多次切割精度及表面质量研究[D]. 南京:南京航空航天大学, 2010. |