[1]Amano R, Avdeev I, Malloy R, et al. Power, Structural and Noise Performance Tests on Different Wind Turbine Rotor Blade Designs[J]. International Journal of Sustainable Energy, 2013, 32(6): 78-95.
[2]Selig M S,McGranahan B D. Wind Tunnel Aerodynamic Tests of Six Airfoils for Use on Small Wind Turbines[J].ASME Journal of Solar Energy Engineering,2004,126(3):986-1001.
[3]Tangle J L, Somers D M. NREL Airfoil Families for HAWT’s[C]//Proc. WINDPOWER’95. Washington D C, 1995:117-123.
[4]Cheng Jiangtao, Zhu Weijun, Fischer Andreas, et al. Design and Validation of the High Performance and Low Noise CQU-DTU-LN1 Airfoils[J]. Wind Energy,2014,17:1817-1883.
[5]陈进,程江涛, Shen Wenzhong,等. 基于表面曲率连续性的风力机翼型改进设计研究[J]. 太阳能学报, 2013, 34(4):547-554.
Chen Jin, Cheng Jiangtao, Shen Wenzhong, et al. Research on Improved Design of Airfoil Profiles Based on the Continuity of Airfoil Surface Curvature of Wind Turbines[J].Acta Energiae Solaris Sinica, 2013, 34(4):547-554.
[6]琚亚平,张楚华. 基于人工神经网络与遗传算法的风力机翼型优化设计方法[J]. 中国电机工程学报, 2009, 29(20):106-111.
Ju Yaping, Zhang Chuhua. Optimal Design Method for Wind Turbine Airfoil Based on Artificial Neural Network Model and Genetic Algorithm[J].Proceedings of the CSEE ,2009, 29(20):106-111.
[7]Kharal A, Saleem A.Neural Networks Based Airfoil Generation for a Given Cp Using Bezier-PARSEC Parameterization[J]. Aerospace Science and Technology, 2012, 23:330-344.
[8]朱国俊,冯建军,郭鹏程,等. 基于径向基神经网络-遗传算法的海流能水轮机叶片翼型优化[J]. 农业工程学报,2014, 30(8):65-73.
Zhu Guojun, Feng Jianjun, Guo Pengcheng, et al. Optimization of Hydrofoil for Marine Current Turbine Based on Radial Basis Function Neural Network and Genetic Algorithm[J]. Transactions of the Chinese Society of Agricultural Engineering, 2014, 30(8):65-73.
[9]李仁年, 袁尚科, 赵子琴,等. 尾缘改型对风力机翼型性能的影响研究[J]. 空气动力学学报, 2012, 30(5):646-652.
Li Rennian, Yuan Shangke, Zhao Ziqin, et al. Research on the Effect of Trail-edge Improvement on Airfoils Performance for Wind Turbine[J]. Acta Aerodynamica Sinica, 2012, 30(5):646-652.
[10]刘雄,罗文博,陈严,等.风力机翼型气动噪声优化设计研究[J].机械工程学报,2011,47(14):134-139.
Liu Xiong, Luo Wenbo, Chen Yan, et al. Research on the Aerodynamic Noise Optimization of Wind Turbine Airfoil[J]. Journal of Mechanical Engineering, 2011,47(14):134-139.
[11]王旭东, 陈进, 王立存,等. 通用风力机翼型型线的表面粗糙度敏感性研究[J]. 中国机械工程, 2011,22(13):1588-1590.
Wang Xudong, Chen Jin, Wang Licun, et al. Study on Roughess Sensitivity of Genreal Profiles for Wind Turbine Airfoils[J]. China Mechanical Engineering, 2011,22(13):1588-1590.
[12]马林静,陈江,杜刚,等. 风力机翼型气动特性数值模拟[J]. 太阳能学报,2010,31(2):203-209.
Ma Linjing, Chen Jiang, Du Gang, et al. Numerical Simulation of Aerodynamic Performance for Wind Turbine Airfoils[J]. Acta Energiae Solaris Sinica, 2010,31(2):203-209.
[13]Song Qiyue, William D L. Design and Testing of a New Small Wind Turbine Blade[J]. Journal of Solar Energy Engineering ASME, 2014, 136:034502.
[14]Brooks T F, Pope D S, Maroolim M A. Airfoil Self-noise and Prediction[M]. Hampton,Virginia:National Aeronautics and Space Administration, 1989.
[15]Zhu Weijun,Heilskov N, Shen Wenzhong, et al. Modeling of Aerodynamically Generated Noise from Wind Turbines[J]. Jouranl of Solar Energy Engineering, 2005, 127(4):517-528. |