China Mechanical Engineering ›› 2015, Vol. 26 ›› Issue (9): 1271-1277.
Previous Articles Next Articles
Zhang Haiou1;Ying Weisheng2;Fu Youheng1;Wang Guilan1
Online:
2015-05-10
Published:
2015-05-08
张海鸥1;应炜晟2;符友恒1;王桂兰1
CLC Number:
Zhang Haiou, Ying Weisheng, Fu Youheng, Wang Guilan. Advances in Additive Shaping of Ceramic Parts[J]. China Mechanical Engineering, 2015, 26(9): 1271-1277.
张海鸥, 应炜晟, 符友恒, 王桂兰. 陶瓷零件增量成形技术的研究进展[J]. 中国机械工程, 2015, 26(9): 1271-1277.
[1]颜永年, 张人佶, 林峰,等.快速制造技术的发展道路与发展趋势[J]. 电加工与模具, 2007(增刊2):25-29. Yan Yongnian, Zhang Renji, Lin Feng, et al. The Development and Trends of Rapid Manufacturing Technologies[J]. Electromachining & Mould, 2007(S2): 25-29. [2]张海鸥, 王超, 胡帮友,等.金属零件直接快速制造技术及发展趋势[J]. 航空制造技术,2010(8):43-46. Zhang Haiou, Wang Chao, Hu Bangyou, et al. Direct Rapid Manufacturing Technology for Metal Parts and Its Development Trends[J]. Aeronautical Manufacturing Technology, 2010(8): 43-46. [3]姬文晋,黄慧民, 温立哲,等.特种陶瓷成形方法[J]. 材料导报, 2007, 21(9):9-12. Ji Wenjin, Huang Huimin, Wen Lizhe, et al. Forming Methods of Special Ceramics[J]. Materials Review, 2007, 21(9): 9-12. [4]高端平, 吴厚政. 计算机辅助陶瓷无模制造方法进展[J]. 材料导报, 1998, 12(4): 13-17. Gao Duanping, Wu Houzheng. Development of Computer Aided Ceramic Freeform Fabrication[J]. Materials Review, 1998, 12(4): 13-17. [5]谢志鹏, 薄铁柱. 先进陶瓷快速无模成形技术的研究与进展[J]. 中国陶瓷工业, 2011, 18(2):16-21. Xie Zhipeng, Bo Tiezhu. Progress in Investigation on Rapid Freeform Fabrication of Advanced Ceramics[J]. China Ceramic Industry, 2011, 18(2): 16-21. [6]Agarwala M K, Jamalabad V R, Langrana N A, et al. Structural Quality of Parts Processed by Fused Deposition[J]. Rapid Prototyping Journal, 1996, 2(4): 4-19. [7]崔学民,欧阳世翕, 余志勇,等. 先进陶瓷快速无模成形方法研究的进展[J]. 陶瓷, 2001(4): 5-10. Cui Xuemin, Ouyang Shixi, Yu Zhiyong, et al. Development of Advanced Ceramics Freeform Fabrication[J]. Ceramics, 2001(4): 5-10. [8]高东强.基于层合速凝原理的陶瓷件快速制造设备及材料成形研究[D].西安:陕西科技大学,2012. [9]Agarwala M K, van Weeren R, Vaidyanathan R, et al. Structural Ceramics by Fused Deposition of Ceramics[C]//Proceedings of the Solid Freeform Fabrication Symposium.Austin, 1995: 1-8. [10]Agarwala M K, Bandyopadhyay A, van Weeren R, et al. Fused Deposition of Ceramics (FDC) for Structural Silicon Nitride Components[C]//Proceedings of the Solid Freeform Fabrication Symposium. Austin,1996:335-344. [11]Agarwala M K, van Weeren R, Bandyopadhyay A, et al. Fused Deposition of Ceramics and Metals: an overview[C]//Proceedings of the Solid Freeform Fabrication Symposium. Austin,1996. [12]Travitzky N, Bonet A, Dermeik B, et al. Additive Manufacturing of Ceramic-Based Materials[J]. Advanced Engineering Materials, 2014, 16(6):729-754. [13]Butscher A, Bohner M, Roth C, et al. Printability of Calcium Phosphate Powders for Three-dimensional Printing of Tissue Engineering Scaffolds[J]. Acta Biomaterialia, 2012, 8(1): 373-385. [14]Karapatis N P, van Griethuysen J P S, Glardon R. Direct Rapid Tooling: a Review of Current Research[J]. Rapid Prototyping Journal, 1998, 4(2): 77-89. [15]Zhang Wei, Melcher R, Travitzky N, et al. Three-Dimensional Printing of Complex-shaped Alumina/Glass Composites[J]. Advanced Engineering Materials, 2009, 11(12): 1039-1043. [16]Butscher A, Bohner M, Doebelin N, et al. Moisture Based Three-dimensional Printing of Calcium Phosphate Structures for Scaffold Engineering[J]. Acta Biomaterialia, 2013, 9(2): 5369-5378. [17]Sun W, Dcosta D J, Lin F, et al. Freeform Fabrication of Ti3SiC2 Powder-based Structures: Part I—Integrated Fabrication Process[J]. Journal of Materials Processing Technology, 2002, 127(3): 343-351. [18]Teng W D, Edirisinghe M J. Development of Ceramic Inks for Direct Continuous Jet Printing[J]. Journal of the American Ceramic Society, 1998, 81(4): 1033-1036. [19]Li Xiangming, Zhang Litong, Yin Xiaowei. Effect of Chemical Vapor Infiltration of Si3N4 on the Mechanical and Dielectric Properties of Porous Si3N4 Ceramic Fabricated by a Technique Combining 3-D printing and Pressureless Sintering[J]. Scripta Materialia, 2012, 67(4): 380-383. [20]Kruth J P, Wang X, Laoui T, et al. Lasers and Materials in Selective Laser Sintering[J]. Assembly Automation, 2003, 23(4): 357-371. [21]Shahzad K, Deckers J, Kruth J P, et al. Additive Manufacturing of Alumina Parts by Indirect Selective Laser Sintering and Post Processing[J]. Journal of Materials Processing Technology, 2013, 213(9): 1484-1494. [22]王卓, 李永祥, 杨群保. 无机材料喷墨制备新方法的进展[J]. 无机材料学报, 2009, 24(6):1090-1096. Wang Zhuo, Li Yongxiang, Yang Qunbao. Progress of Novel Inkjet Technique for Inorganic Materials Preparation[J]. Journal of Inorganic Materials, 2009, 24(6):1090-1096. [23]Cappi B, zkol E, Ebert J, et al. Direct Inkjet Printing of Si3N4:Characterization of Ink, Green Bodies and Microstructure[J]. Journal of the European Ceramic Society, 2008, 28(13):2625-2628. [24]Badev A, Aboulatim Y, Chartier T, et al. Photopolymerization Kinetics of a Polyether Acrylate in the Presence of Ceramic Fillers Used in Stereolithography[J]. Journal of Photochemistry and Photobiology A: Chemistry, 2011, 222(1):117-122. [25]Hinzewski C, Corbel S, Chartier T. Ceramic Suspensions Suitable for Stereolithography[J]. Journal of the European Ceramic Society, 1998, 18(6):583-590. [26]Gao Feng, Yang Shoufeng, Hao Pengwei, et al. Suspension Stability and Fractal Patterns: a Comparison Using Hydroxyapatite[J]. Journal of the European Ceramic Society, 2011, 94(3):704-712. [27]Tasaki S, Kirihara S, Sohmura T. Visualization of Mechanical Properties in Alumina Dental Crowns Fabricated by Using Laser Scanning Stereolithography[J]. Transactions of JWRI, 2010, 39(2):248-249. [28]Rodrigues S J, Chartoff R P, Klosterman D A, et al. Solid Freeform Fabrication of Functional Silicon Nitride Ceramics by Laminated Object Manufacturing[C]//Proceedings of the Solid Freeform Fabrication Symposium. Austin,2000. [29]Zhang Yumin, He Xiaodong, Han Jiecai, et al. Ceramic Green Tape Extrusion for Laminated Object Manufacturing[J]. Materials Letters, 1999, 40(6):275-279. [30]Zhang Yumin, He Xiaodong, Du Shanyi, et al. Al2O3 Ceramics Preparation by LOM(Laminated Object Manufacturing)[J]. The International Journal of Advanced Manufacturing Technology, 2001, 17(7):531-534. [31]Steidle C, Klosterman D, Chartoff R, et al. Automated Fabrication of Custom Bone Implants Using Rapid Prototyping[C]//44th International SAMPE Symposium and Exhibition. Long Beach,1999. [32]Karin S, Andreas R. Manufacture of 3D Structures by Cold Low Pressure Lamination of Ceramic Green Tapes[J]. Journal of the European Ceramic Society, 2009, 29(5):899-904. [33]Tang Hwa-Hsing, Liu Fwu-Hsing, Lin Wen-Hsing. Rapid Prototyping Machine Based on Ceramic Laser Fusion[J]. The International Journal of Advanced Manufacturing Technology, 2006, 30(7/8):687-692. [34]Tang Hwa-Hsing. Direct Laser Fusing to Form Ceramic Parts[J]. Rapid Prototyping, 2002, 8(5):284-289. [35]Tang Hwa-Hsing, Yen Hsiao-Chuan. Ceramic Parts Fabricated by Ceramic Laser Fusion[J]. Materials Transactions, 2004, 45(8):2744-2751. [36]Yen Hsiao-Chuan, Tang Hwa-Hsing. Study on Direct Fabrication of Ceramic Shell Mold with Slurry-based Ceramic Laser Fusion and Ceramic Laser Sintering[J]. The International Journal of Advanced Manufacturing Technology, 2012, 60(9/12):1009-1015. [37]Tang Hwa-Hsing. Building Ultra-thin Layers by Ceramic Laser Sintering[J]. Materials Transactions, 2006, 47(3):889-897. [38]Yen Hsiao-Chuan. A New Slurry-based Shaping Process for Fabricating Ceramic Green Part by Selective Laser Scanning the Gelled Layer[J]. Journal of the European Ceramic Society, 2012, 32(12):3123-3128. [39]Tang Hwa-Hsing, Chiu Ming-Lu, Yen Hsiao-Chuan. Slurry-based Selective Laser Sintering of Polymer-coated Ceramic Powders to Fabricate High Strength Alumina Parts[J]. Journal of the European Ceramic Society, 2011, 31(8):1383-1388. |
[1] | LI Rongqi, YAN Tao, HE Zhicheng, MI Dong, JIANG Chao, ZHENG Jing. A Topology Optimized Design Method for High-performance Structures with Fluid-thermal-mechanics Coupling [J]. China Mechanical Engineering, 2024, 35(03): 487-497. |
[2] | XU Zuolin, HUANG Chuanzhen, LIU Huanlian, LIU Dun. Coating Technology and Mechanism of Modified Diamond Powder by Surface Coating of WC Powders [J]. China Mechanical Engineering, 2024, 35(02): 208-214. |
[3] | ZHANG Wenjun, WANG Wenqi, ZHANG Xiaodong, LIN Wei, ZHANG Yandong, BAI Zhenhua, . Comprehensive Thickness Control Technology of 1180 MPa Grade Ultra-high Strength Steels in Cold Tandem Rolling [J]. China Mechanical Engineering, 2024, 35(02): 347-353,370. |
[4] | ZHAO Chuang, ZHAO Yugang, ZHAO Dandan, MENG Shuo, YU Hanlin, LI Zhihao, CAO Chen, ZHANG Haiyun, MENG Jianbing. Study on Groove Structures of Inconel 718 Alloy Fabricated by WJGL [J]. China Mechanical Engineering, 2023, 34(20): 2403-2410. |
[5] | ZHA Xuming, YUAN Zhi, QIN Hao, XI Linqing, ZHANG Tao, JIANG Feng. Ultrasonic Impact Strengthening of Titanium Alloys:State-of-the-art and Prospectives [J]. China Mechanical Engineering, 2023, 34(19): 2269-2287. |
[6] | TWANG Wei, MA Qianlun, BAI Zhenhua, WANG Ziang. Mechanics Property Prediction of Cold Rolled High Strength Steel Coils Based on GBD#br# [J]. China Mechanical Engineering, 2023, 34(18): 2222-2229. |
[7] | YANG Fei, JIANG Wei, CHEN Cheng, HUANG Zhigao, ZHOU Huamin, . Study on Infrared Heat Source-assisted Open-space Industrial Robotic FDM Equipment Design and Forming Performance [J]. China Mechanical Engineering, 2023, 34(11): 1343-1352,1385. |
[8] | GUO Wenguang, WANG Fei. Braking Torque Model in Liquid-cooled Permanent-magnet Retarders Accounting for Temperature Effects [J]. China Mechanical Engineering, 2023, 34(06): 685-693. |
[9] | LI Yang, LIU Huaiju, WEI Peitang, MAO Tianyu, CHEN Difa. Calculation Method and Software Development of Gear Fatigue Strength under Small Samples Based on Monte-Carlo Simulation [J]. China Mechanical Engineering, 2023, 34(02): 185-192. |
[10] | FANG Xuewei, JIANG Xiao, WANG Zhe, WU Xiaokang, HUANG Ke. Forming Process Optimization of Wire and Arc Additive Manufactured High-strength Steel ER120S-G [J]. China Mechanical Engineering, 2023, 34(02): 218-225. |
[11] | MENG Liang, ZHONG Mingzhe, LI Wenbiao, XIA Liang, GAO Tong, ZHU Jihong, ZHANG Weihong, . Topology Optimization Design of Aero-engine External System Brackets for Additive Manufacturing [J]. China Mechanical Engineering, 2022, 33(23): 2822-2832. |
[12] | LI Shougang, LIU Peng, LIU Xiang, HU Zhili, . Rebound Law and Precision Compensation Method of Three-dimensional Laser Cutting of High Strength Steel Hot Stamping Structural Parts [J]. China Mechanical Engineering, 2022, 33(22): 2741-2747. |
[13] | NI Zexing, WANG Xiufeng, XU Bo, LI Rui. Applications of Adaptive Bandwidth Kernel Density Estimation in Recognition of Poor Quality Monitoring Data of Rotating Machinery [J]. China Mechanical Engineering, 2022, 33(20): 2476-2482. |
[14] | HE Zhicheng, YANG Dingding, JIANG Chao, WU Yi, JIANG Hexin. Strength-constrainted Topology Optimization Based on Additive Manufacturing Anisotropy [J]. China Mechanical Engineering, 2022, 33(19): 2372-2380,2393. |
[15] | CONG Jianchen, NI Peixiang, SUN Jun, LYU Shijie. Experimental Research and Analysis on Torsional Fatigue Strength of Engine Crankshafts [J]. China Mechanical Engineering, 2022, 33(18): 2197-2204. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||