[1]杨亚联,秦大同,王红岩,等. CVT无级变速传动钢带的轴向偏移分析[J]. 重庆大学学报(自然科学版),1999,22(6):1-7.
Yang Yalian, Qin Datong, Wang Hongyan, et al. Analysis of Misalignment of Metal Pushing V-belt of Continuously Variable Transmission[J].Journal of Chongqing University,1999,22(6):1-7.
[2]郭毅超 ,何维廉 ,黄宏成. 金属带式CVT的钢带轴向偏移分析[J]. 传动技术,2001(4):43-47.
Guo Yichao, He Weilian, Huang Hongcheng. The Analysis of Alignment of the Metal Pushing Belt Type Continuously Variable Transmission[J].Drive System Technique,2001(4):43-47.
[3]王红岩,杨志华,白雪,等. 金属带式无级变速器装置带轮工作面形状与带轴向偏移的分析[J].吉林工业大学学报,1997(4):17-22.
Wang Hongyan, Yang Zhihua, Bai Xue, et al.Analysis of the Surface Shape of the V-sheave and the Belt Misaligrnment in the Metal V-belt CVT[J]. Journal of Jilin University of Technology,1997(4):17-22.
[4]张伟华,程乃士,谢里阳. 直母线锥盘金属带式无级变速器带的轴向偏移分析[J]. 中国机械工程,2007, 18(8): 1005-1007.
Zhang Weihua, Cheng Naishi, Xie Liyang. Analysis of Axial Deviation of the Belt in a Metal V-belt CVT with Straight Generatrix Cones[J].China Mechanical Engineering,2007,18(8):1005-1007.
[5]张伟华,程乃士,孙德志,等. 金属带式无级变速器锥盘母线的设计方法[J]. 东北大学学报,2001, 22(3): 279-281.
Zhang Weihua, Cheng Naishi, Sun Dezhi, et al. Design Method of Cone Disc Generatrix in a Metal V-belt Continuously Variable Transmission[J].Journal of Northeastern University,2001,22(3):279-281.
[6]安颖,宋传学,高帅. CVT金属带偏移量计算及其优化[J]. 汽车技术,2009(2):26-29.
An Ying, Song Chuanxue, Gao Shuai.Computation and Optimization of CVT Misalignment[J].Automobile Technology, 2009(2):26-29.
[7]张武,郭卫,路正雄,等.一种新型金属带式无级变速器设计与分析[J].机械传动,2015,39(9):59-61.
Zhang Wu, Guo Wei, Lu Zhengxiong, et al. Design and Analysis of a New Type of Metal Belt Continuously Variable Transmission[J]. Journal of Mechanical Transmission,2015,39(9):59-61.
[8]Zang F, Wu Z. Control Study on the CVT Metal V-belt's Axial-misalignment of Car[C]// Intelligent Vehicles Symposium. Xi'an, 2009:1389-1393.
[9]Zang F Y. Simulation and Fuzzy Control Study on the CVT Metal V Belt Axial Misalignment of Car[J]. Key Engineering Materials, 2010, 426/427: 97-101.
[10]Zang F Y. Simulation Research of the Electro-hydraulic Control System of CVT Metal V-belt's Axial Misalignment[C]//International Technology and Innovation Conference. Xi'an, 2009:556.
[11]陈坚,薛磊. 偏角对钢丝绳负面影响的新指标[J]. 起重运输机械,2013(3):43-48.
Chen Jian, Xue Lei. The New Norm of the Negative Effect of Deflection Angle on Wire Rope[J].Hoisting and Conveying Machinery,2013(3):43-48.
[12]李海波,白剑波,韩梦丹,等. 起重机钢丝绳允许偏角的探讨[J]. 起重运输机械,2015(5):43-46.
Li Haibo, Bai Jianbo, Han Mengdan, et al. The Investigate of the Permit Deflection Angle on Wire Rope of the Crane[J]. Hoisting and Conveying Machinery,2015(5):43-46.
[13]张发军,刘中,周长,等. CVT金属带轴向偏斜对功率损失影响的研究[J]. 机械传动,2013(6):13-16.
Zhang Fajun, Liu Zhong, Zhou Chang, et al. Research on the Influence of Axial Oblique Position on Power Loss Mechanism in CVT[J]. Journal of Mechanical Transmission, 2013(6): 13-16.
|