[1]Benedyk J. Light Metal in Automotive Applications. [J]. Light Metal Age,2000,58(10):34-35.
[2]邱国华,汪侃磊,杨亭福.车身轻量化技术路径发展研究[J].上海汽车,2015(6):40-45.
Qiu Guohua,Wang Kanlei,Yang Tingfu. A Study on the Development of Light weighting of Car Body[J]. Shanghai Auto,2015(6):40-45.
[3]韩旭,朱平,余海东.基于刚度和模态性能的轿车驾驶室轻量化研究[J].汽车工程,2007,29(7):545-549.
Han Xu,Zhu Ping,Yu Haidong. A Study on the Weight Reduction of Car_body with Required stiffness and Modal Performances[J]. Automotive Enginneering,2007,29(7):545-549.
[4]施 颐,朱 平,张 宇,等.基于刚度与耐撞性要求的车身结构轻量化研究[J].汽车工程,2010,32(9):19-24.
Shi Yi,Zhu Ping,Zhang Yu,et al. A Study on the Light Weighting of Car Body Structure Based on Stiffness and Crash Worthiness Requirements[J]. Automotive Enginneering,2010,32(9):19-24.
[5]叶 辉,胡 平,申国哲,等.基于灵敏度和碰撞仿真的汽车车身轻量化优化设计[J].农业机械学报,2010,41(10):24-28,33.
Ye Hui,Hu Ping,Shen Guozhe,et al. Light Weight Optimization Design of Car Body Based on Sensitivity and Side Crash Simulation[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(10):24-28,33.
[6]史国宏,陈 勇,杨雨泽.白车身多学科轻量化优化设计应用[J].机械工程学报,2012,48(8):114-118.
Shi Guohong,Chen Yong,Yang Yuze. BIW Architecture Multidisciplinary Light Weight Optimization Design[J]. Journal of Mechanical Engineering,2012,48(8):114-118.
[7]高云凯,王婧人,汪翼.基于正交试验的大型客车车身结构多工况拓扑优化研究[J].汽车科技,2011(11):16-19.
Gao Yunkai,Wang Jingren,Wang Yi. Multi-case Topology Optimization of Bus Body Structure Based on Orthogonal Test[J].Auto Sci-Tech,2011(11):16-19.
[8]王登峰,卢放.基于多学科优化设计方法的白驾驶室轻量化[J].吉林大学学报(工学版),2015,45(1):29-37.
Wang Dengfeng,Lu Fang. Body-in-white Lightweight Based on Multidisciplinary Design Optimization[J]. Journal of Jilin University ( Engineering and Technology Edition),2015,45(1):29-37.
[9]兰凤崇,赖番结,陈吉清,等.考虑动态特性的多工况驾驶室结构拓扑优化研究[J].机械工程学报,2014,50(20):122-128.
Lan Fengchong,Lai Fanjie,Chen Jiqing,et al. Multi-case Topology Optimization of Body Structure Considering Dynamic Characteristic[J]. Journal of Mechanical Engineering,2014,50(20):122-128.
[10]Satty T L,Vargas L G. Models, Methods, Concepts & Applications of the Analytic Hierarchy Process[M]. 2nd ed. New York:Springer,2012.
[11]智淑亚. 汽车车身结构与设计[M]. 北京: 机械工业出版社, 2014.
[12]马鸣图,路洪洲,李志刚.论轿车白车身轻量化的表征参量和评价方法[J].汽车工程,2009,31(5):403-406.
Ma Mingtu,Lu Hongzhou,Li Zhigang. On the Description Parameters and Evaluation Method for Light weighting of Car Body-in-white[J]. Automotive Enginneering,2009,31(5):403-406.
[13]季枫.白车身参数化建模与多目标轻量化优化设计方法研究[D]. 长春: 吉林大学,2014.
[14]陈剑,蒋丰鑫,肖悦.挖掘机驾驶室低频噪声分析与控制[J].中国机械工程,2014,25(15):2124-2129.
Chen Jian,Jiang Fengxin,Xiao Yue. Low Frequency Noise Analysis and Control of Excavator Cab[J]. China Mechanical Engineering,2014,25(15):2124-2129.
|