Tests and Optimization of Structural Vibration Characteristics for Truck Steering Systems

Abstract

Abstract: Dynamic analyses of steering systems were carried out for a certain type of vehicles, and experimental studies were carried out. Vibration responses of the steering systems were measured by transient excitations, and the frequency response function curves of accelerations were obtained. Constraint modal parameters of steering wheels, steering column assembly and tube beam of cross car beam were obtained by hammering method. Modal vibration mode and dynamic stiffness of mounting point were combined into an integrated analysis, and the structure that needed to be optimized was determined. Effectiveness of the optimization scheme was verified by the vibration sensitivity tests of control points of the steering wheels.

Key words: steering system, dynamic stiffness analysis, constrained modal test, steering wheel vibration

摘要： 针对某型车开展了转向系统结构的动力学分析并进行了试验研究；采用瞬态激励测量转向系统结构的振动响应，得到加速度频响函数曲线；通过锤击法识别出转向盘、转向柱组件和汽车仪表板横梁管梁的约束模态参数。综合分析了模态振型和安装点动刚度，确定了需要优化的结构；通过对转向盘控制点的振动灵敏度测试，验证了优化方案的有效性。

关键词: 转向系统, 动刚度分析, 约束模态试验, 转向盘振动

CLC Number:

TH113.1

CHEN Jian;RONG Fangming. Tests and Optimization of Structural Vibration Characteristics for Truck Steering Systems[J]. China Mechanical Engineering.

陈剑;戎芳明. 货车转向系统结构振动特性测试与优化[J]. 中国机械工程.

References

[1]周安勇，侯蕾，刘旌扬. 白车身接附点动刚度优化设计[J]. 汽车技术，2013（6）：16-19.
ZHOU Anyong，HOU Lei，LIU Jingyang. Optimization of Dynamic Stiffness for BIW Attaching Points[J]. Automobile Technology，2013(6)：16-19.
[2]卢培纪，王福明. 车辆转向系统振动特性的试验分析[J]. 装备制造技术，2014（1）：119-120.
LU Peiji，WANG Fuming. Vehicle Steering System Vibration Characteristic Analysis of the Test[J]. Equipment Manufacturing Technology，2014(1)：119-120.
[3]周岐坤，王霄，刘会霞. 基于皮卡车转向系统NVH性能仿真与优化设计[J]. 机电一体化，2016（2）：54-61.
ZHOU Qikun，WANG Xiao，LIU Huixia. NVH Performance Simulation and Optimization Design on Pickup Steering System[J]. Mechatronics，2016（2）：54-61.
[4]韩坤，屈晓峰，方华. 基于灵敏度和动刚度计算的车架轻量化设计[J]. 湖北汽车工业学院学报，2015（4）：21-25.
HAN Kun，QU Xiaofeng，FANG Hua. Lightweight Study of Frame Based on Sensitivity Analysis and Calculation of Dynamic Stiffness[J]. Journal of Hubei University of Automotive Technology，2015（4）：21-25.
[5]庞剑. 汽车车身噪声与振动控制[M].北京:机械工业出版社，2015.
PANG Jian. Noise and Vibration Control of Automobile Body[M].Beijing: Mechanical Industry Press，2015.
[6]王志亮，刘波，桑建兵，等.动刚度分析在汽车车身结设计中的应用[J]. 机械设计与制造，2008（2）：30-31.
WANG Zhiliang，LIU Bo，SANG Jianbing, et al. Dynamic Stiffness Analysis in the Application of Auto-body Structure Design[J]. Machinery Design & Manufacture，2008（2）：30-31.
[7]王宇，潘鹏，辛丕海. 动刚度分析在车身NVH性能方面的研究与应用[J]. 农业装备与车辆工程，2016（4）：34-38.
WANG Yu，PAN Peng，XIN Pihai. Research and Application of Dynamic Stiffness Analysis on Performance of Vehicle Body[J]. Agricultural Equipment & Vehicle Engineering，2016（4）：34-38.
[8]刘显臣. 汽车车身噪声与振动控制[M]. 北京:机械工业出版社，2014：278-296.
LIU Xianchen. Noise and Vibration Control of automobile Body[M]. Beijing: Mechanical Industry Press，2014：278-296.
[9]张磊. 某型卡车驾驶室性能试验研究[D].合肥：合肥工业大学，2013.
ZHANG Lei. The NVH Performance Test Research of a Truck Cab[D]. Hefei：Hefei University of Technology，2013.
[10]杨搏，朱平，余海东，等. 基于模态分析法的车身NVH结构灵敏度分析[J]. 中国机械工程，2008，19（3）：361-364.
YANG Bo，ZHU Ping，YU Haidong，et al. Auto-body NVH Structure Sensitivity Analysis Based on Modal Analysis Method[J]. China Mechanical Engineering，2008，19（3）：361-364.
[11]MOREIRAP M G ，TAVARES P J，PINTO A F B P. Structural Analysis of a Cross Car Beam Using Finite Element Models[J]. International Journal of Structural Integrity，2015（6）：759-774.