[1]黄田, 曾宪菁, 倪雁冰,等. 球面并联操作机的尺度综合方法[J]. 自然科学进展, 2000, 10(8): 751-756.
HUANG Tian, ZENG Xianjing, NI Yanbing, et al. The Dimensional Synthesis of Spherical Parallel Manipulator[J]. Progress in Natural Science, 2000, 10(8): 751-756.
[2]刘辛军, 吴泽启, 张立杰. 基于力传递性能的一种平面并联机器人的优化设计[J]. 清华大学学报(自然科学版), 2008, 48(11): 1751-1754.
LIU Xinjun, WU Zeqi, ZHANG Lijie. Optimum Design of a Planar Parallel Robot Based on Force Transmissibility[J]. Journal of Tsinghua University (Science and Techonlogy),2008, 48(11):1751-1754.
[3]赵亮, 雎刚, 吕剑虹. 一种改进的遗传多目标优化算法及其应用[J]. 中国电机工程学报, 2008, 28(2): 96-102.
ZHAO Liang, JU Gang, LYU Jianhong. An Improved Genetic Algorithm in Multi-objective Optimization and Its Application[J]. Proceedings of the CSEE, 2008, 28(2): 96-102.
[4]侯媛彬, 薛斐, 郑茂全, 等. 基于多层编码的遗传-粒子群融合算法流水线优化控制[J]. 机械工程学报, 2015, 51(9): 159-164.
HOU Yuanbin, XUE Fei, ZHENG Maoquan, et al. Optimization of Flow-shop Control by Using Genetic-particle Swarm Algorithm of Multilayer-coded[J]. Journal of Mechanical Engineering, 2015, 51(9): 159-164.
[5]SCHMIDHUBER J. Discovering Neural Nets with Low Kolmogorow Complexity and High Generalization Capability[J]. Neural Networks the Official Journal of the International Neural Network Society, 1997, 10(5): 857-873.
[6]张渝, 胡启国, 张甫仁. 基于粒子群算法的冷挤压模具结构参数优化设计[J]. 中国机械工程, 2010, 21(8): 1003-1007.
ZHANG Yu, HU Qiguo, ZHANG Furen. Optimal Design of Structural Parameters of Cold Extrusion Dies Based on Partical Swarm Optimization[J]. China Mechanical Engineering, 2010, 21(8): 1003-1007.
[7]KURODA M,MORI Y, LIZUKA M, et al. Acceleration of the Alternating Least Squares Algorithm for Principal Components Analysis[J]. Computational Statistics and Data Analysis, 2011, 55(1): 143-153.
[8]黄姗, 丁坚平, 徐洋. 基于主成分分析法对开阳县岩溶地下水水质的评价[J]. 环保科技, 2014, 20(6): 48-52.
HUANG Shan, DING Jianping, XU Yang. The Evaluation of Karst Groundwater Quality Based on Principal Component Analysis in Kaiyang[J]. Environmental Protection and Technology, 2014, 20(6): 48-52.
[9]刘臣辉, 吕信红, 范海燕. 主成分分析法用于环境质量评价的探讨[J]. 环境科学与管理, 2011, 36(3): 183-186.
LIU Chenhui, LYU Xinhong, FAN Haiyan. Study of Applying Principal Component Analysis to Environmental Quality Assessment[J]. Environmental Science and Management, 2011, 36(3): 183-186.
[10]周桐. 基于PCA的人脸识别系统的设计与实现[D]. 哈尔滨: 哈尔滨工业大学, 2007.
ZHOU Tong. Face Recognition System Design and Implementation Based on Principal Component Analysis[D]. Harbin:Harbin Institute of Technology, 2007.
[11]王婧瑶, 许勇, 曹本希. 基于主成分分析的超声人脸识别算法研究[J]. 计算机工程与设计, 2013, 34(8): 2867-2871.
WANG Jingyao, XU Yong, CAO Benxi. Ultrasonic Face Recognition Algorithm Based on Principal Component Analysis[J]. Computer Engineering and Design, 2013, 34(8): 2867-2871.
[12]古莹奎, 杨子茜, 朱繁泷. 基于主成分分析的齿轮故障特征融合分析[J]. 中国机械工程, 2015, 26(11): 1532-1537.
GU Yingkui, YANG Zixi, ZHU Fanlong. Gearbox Fault Feature Fusion Based on Principal Component Analysis[J]. China Mechanical Engineering, 2015, 26(11): 1532-1537.
[13]古莹奎, 承姿辛, 朱繁泷. 基于主成分分析和支持向量机的滚动轴承故障特征融合分析[J]. 中国机械工程, 2015, 26(20): 2778-2783.
GU Yingkui, CHENG Zixin, ZHU Fanlong. Rolling Bearing Fault Fusion Based on PCA and SVM [J]. China Mechanical Engineering, 2015, 26(20): 2778-2783.
[14]NGUYEN V H, GOLINVAL J C. Fault Detection Based on Kernel Principal Component Analysis[J]. Engineering Structures, 2010, 32(11): 3683-3691.
[15]梁胜杰, 张志华, 崔立林. 主成分分析法和核主成分分析法在机械噪声数据降维中的应用比较[J]. 中国机械工程, 2011, 22(1): 80-83.
LIANG Shengjie, ZHANG Zhihua, CUI Lilin. Comparison between PCA and KPCA Method in Dimensional Reduction of Mechanical Noise Data[J]. China Mechanical Engineering, 2011, 22(1): 80-83.
[16]赵京, 李立明, 尚红,等. 基于主成分分析法的机械臂运动灵活性性能综合评价[J]. 机械工程学报, 2014, 50(13): 9-15.
ZHAO Jing, LI Liming, SHANG Hong, et al. Comprehensive Evaluation of Robotic Global Kinematic Dexterity Performance Based on Principal Component Analysis[J]. Journal of Mechanical Engineering, 2014, 50(13): 9-15.
[17]赵京, 李立明. 基于主成分分析法和核主成分分析法的机器人全域性能综合评价[J]. 北京工业大学学报, 2014, 40(12): 1763-1769.
ZHAO Jing, LI Liming. Comprehensive Evaluation of Robotic Global Performance Based on Principal Component Analysis and Kernel Principal Component Analysis[J]. Journal of Beijing University of Technology, 2014, 40(12): 1763-1769.
[18]孙志娟, 赵京, 赵辛. PCA与KPCA在并联机构综合性能评价中的应用比较[J]. 制造业自动化, 2014, 36(2): 66-71.
SUN Zhijuan, ZHAO Jing, ZHAO Xin. Comparision between PCA and KPCA Method in Comprehensive Performance Evaluation of Parallel Mechanism[J]. Manufacturing Automation, 2014, 36(2): 66-71.
[19]王文博, 陈秀芝. 多指标综合评价中主成分分析和因子分析方法的比较[J]. 统计与信息论坛, 2006, 21(5): 19-22.
WANG Wenbo, CHEN Xiuzhi. Comparison of Principal Component Analysis with Factor Analysis in Comprehensive Multi-indicators Scoring[J]. Statistics and Information Forum. 2006, 21(5): 19-22.
[20]秦寿康. 综合评价原理与应用[M]. 北京:电子工业出版社, 2003:135-142.
QIN Shoukang. The Theory and Application of Comprehensive Assessment[M]. Beijing: Publishing House of Electronics Industry, 2003:135-142.
[21]林海明, 杜子芳. 主成分分析综合评价应该注意的问题[J]. 统计研究, 2013, 30(8): 25-31.
LIN Haiming, DU Zifang. Some Problem in Comprehensive Evaluation in the Principal Component Analysis[J]. Statistical Research, 2013, 30(8): 25-31. |