[1]LEE S H, LEE G H, KIM S I, et al. A Novel Control Method for Reducing Torque Ripple in PMSM Applied for Electric Power Steering[C]//Electrical Machines and Systems, ICEMS 2008 International Conference on IEEE. New York,2008:3142-3145.
[2]郁亚南,黄守道,成本权,等. 绕组类型与极槽配合对永磁同步电动机性能的影响[J]. 微特电机,2010,38(2):21-23.
YU Yanan, HUANG Shoudao, CHENG Benquan, et al. Influence of Winding Type and Slot-pole Combination on the Performance of Permanent Magnet Synchronous Motor[J].Micro Motor,2010,38(2):21-23.
[3]ZHU Z Q, HOWE D. Influence of Design Parameters on Cogging Torque in Permanent Magnet Machine[J]. IEEE Trans. on Energy Coversinon,2000,15(4):404-417.
[4]郭宏,钱浩. 永磁同步电机低转矩脉动的稳健设计[J]. 中国电机工程学报,2012,32(24):88-95.
GUO Hong, QIAN Hao. Robust Design of Permanent Magnet Synchronous Motor with Low Torque Ripple[J].Chinese Journal of Electrical Engineering,2012,32(24):88-95.
[5]姚哲之,易灵芝. 基于三电平逆变器的直接转矩控制研究[J]. 计算技术与自动化,2008,27(4):40-43.
YAO Zhezhi, YI Lingzhi. Research on Direct Torque Control Based on Three Level Inverter [J].Computing Technology and Automation,2008,27(4):40-43.
[6]王宏佳,杨明,牛里,等. 永磁交流伺服系统电流环带宽扩展研究[J]. 中国电机工程学报,2010,30(12):56-62.
WANG Hongjia, YANG Ming, NIU Li, et al.Research on Current Loop Bandwidth Expansion of Permanent Magnet AC Servo System [J].Chinese Journal of Electrical Engineering,2010,30(12):56-62.
[7]孟光伟,李槐树,熊浩. PWM调制下无刷直流电机的转矩脉动抑制[J]. 电气传动,2011(1):26-30.
MENG Guangwei, LI Huaishu,XIONG Hao. Torque Ripple Suppression of Brushless DC Motor under PWM Modulation [J].Electric Drive,2011(1):26-30.
[8]周美兰,高肇明,吴晓刚,等. 五种PWM方式对直流无刷电机系统换相转矩脉动的影响[J]. 电机与控制学报,2013,17(7):15-21.
ZHOU Meilan, GAO Zhaoming, WU Xiaogang, et al. Influence of Five PWM Modes on Commutation Torque Ripple in Brushless DC Motor [J]. Journal of Electrical Machinery and Control,2013,17(7):15-21.
[9]王大方,卜德明,朱成,等. 一种减小无刷直流电机换相转矩脉动的调制方法[J]. 电工技术学报,2014,29(5):160-166.
WANG Dafang, BU Deming, ZHU Cheng, et al. A Method of Reducing Commutation Torque Ripple in Brushless DC Motor[J].Journal of Electrical Engineering,2014,29(5):160-166.
[10]LUH J Y S, FISHER W D, PAUL R P C. Joint Torque Control by a Direct Feedback for Industrial Robots[J]. IEEE Transactions on Automatic Control,1983,28(2):153-161.
[11]李书臣,李平,徐心和,等. 迭代学习控制理论现状与展望[J]. 系统仿真学报,2005,17(4):904-908.
LI Shuchen, LI Ping, XU Xinhe, et al. Current Status and Prospect of Iterative Learning Control Theory [J]. Journal of System Simulation,2005,17(4):904-908.
[12]宋伟,王秀和,杨玉波. 削弱永磁电机齿槽转矩的一种新方法[J]. 电机与控制学报,2004,8(3):214-217.
SONG Wei, WANG Xiuhe, YANG Yubo. A New Method for Reducing Cogging Torque of Permanent Magnet Motor [J]. Journal of Electrical Machinery and Control,2004,8(3):214-217.
[13]ARIMOTO S, NANIWA T, SUZUKI H. Robustness of P-type Learning Control with a Forgetting Factor for Robotic Motions [J]. IEEE Conference on Decision&Control,1990,5(1):2640-2645. |