1.National Engineering Technology Research Center for High Efficiency Grinding Technology,Hunan University,Changsha,410082
2.Engineering Research Center of Complex Tracks Processing Technology and Equipment of Ministry of Education,Xiangtan University,Xiangtan,Hunan,411105
3.Key Laboratory of Special Purpose Equipment and Advanced Processing Technology of Ministry of Education,Hangzhou,310014
4.Hunan Provincial Key Laboratory of High Efficiency and Precision Machining for Difficult-to-Cut Material,Hunan University of Science and Technology,Xiangtan,Hunan,411201
Online:2018-10-10
Published:2018-10-08
Supported by:
National Natural Science Foundation of China (No. 51605163)
Hunan Provincial Natural Science Foundation of China (No. 2017JJ4055)
Hunan Provincial Key Research and Development Program(No. 2016GK2014,2017GK2050)
YUAN Julong1,3,4;MAO Meijiao1,2;LI Min1,3,4;LIU Shun2;WU Feng2;HU Zihua2;QIN Changjiang2. Optimization of CMP Processing Parameters for YG8 Cemented Carbide Inserts Based on RSM[J]. China Mechanical Engineering.
[1]YIN L, SPOWAGE A C, RAMESH K, et al. Influence of Microstructure on Ultraprecision Grinding of Cemented Carbides[J]. International Journal of Machine Tools & Manufacture, 2004, 44(5):533-543.
[2]何柏林,邓海鹏. 表面完整性研究现状及发展趋势[J]. 表面技术,2015(09):140-146.
HE Boli, DENG Haipeng.Research Status and Development Trend of Surface Integrity[J]. Surface Technology,2015(09):140-146.
[3]苏永生. 表面织构刀具切削钛合金的基础研究[D].南京:南京航空航天大学,2015.
SU Yongsheng. Research on Machining of Titanium Alloy Using Cutting Tool with Surface Texture[D]. Nanjing: Nanjing University of Aeronautics and Astronautics,2015.
[4]李敏,袁巨龙,吴喆,等. 复杂曲面零件的超精密加工方法的研究进展[J]. 机械工程学报,2015,51(5):178-191.
LI Min, YUAN Julong, WU Zhe, et al. Progress in Ultra-precision Machining Methods of Complex Curved Parts[J]. Journal of Mechanical Engineering, 2015(5):178-191.
[5]袁巨龙, 张飞虎, 戴一帆,等. 超精密加工领域科学技术发展研究[J]. 机械工程学报, 2010, 46(15):161-177.
YUAN Julong, ZHANG Feihu, DAI Yifan, et al. Development Research of Science and Technologies in Ultra-precision Machining Field[J]. Journal of Mechanical Engineering, 2010,46(15):161-177.
[6]JOO S, LIANG H. Tribology in Chemical–mechanical Planarization[J]. Tribology & Lubrication Technology, 2013(2):58.
[7]袁巨龙, 王志伟, 文东辉,等. 超精密加工现状综述[J]. 机械工程学报, 2007, 43(1):35-48.
YUAN Julong, WANG Zhiwei, WEN Donghui, et al. Review of the Current Situation of Ultra-precision Machining[J]. Journal of Mechanical Engineering,2007, 43(1):35-48.
[8]WANG Y G, ZHANG L C, Biddut A. Chemical Effect on the Material Removal Rate in the CMP of Silicon Wafers[J]. Wear, 2011, 270(3): 312-316.
[9]苏建修, 郭东明, 康仁科, 等. 硅片化学机械抛光时运动形式对片内非均匀性的影响分析[J]. 中国机械工程, 2005, 16(9):815-818.
SU Jianxiu, GUO Dongming, KANG Renke, et al. Analysis of Influences on Within-wafer-nonuniformity of Motion Form in Wafer Chemical Mechanical Polishing[J]. China Mechanical Engineering, 2005, 16(9):815-818.
[10]赵清亮, 孙智源, 郭兵. 碳化硅圆柱槽微结构表面的化学机械抛光[J]. 机械工程学报, 2015, 51(15):183-189.
ZHAO Qingliang, SUN Zhiyuan, GUO Bing. Chemical Mechanical Polishing of Micro-structures on SSiC[J]. Journal of Mechanical Engineering,2015, 51(15):183-189.
[11]毛美姣, 吴锋, 胡自化. 抛光垫特性对硬质合金刀片CMP加工效果的影响[J].表面技术, 2017, 46(12):270-276.
MAO Meijiao, WU Feng, HU Zihua. Effects of Polishing Pad Characteristics on CMP (Chemical Mechanical Polishing) Result of Cemented Carbide Tool[J]. Surface Technology, 2017,46(12):270-276.
[12]胡自化,王金龙,秦长江,等.刀片表面粗糙度对工件表面残余应力分布影响的分析[J].表面技术,2018,47(2):255-261.
HU Zihua, WANG Jinlong, QIN Changjiang, et al. Effect of Insert Surface Roughness on Residual Stress Distribution of Workpiece Surface[J].Surface Technology, 2018,47(2):255-261.
[13]NIRANJAN K, LAKSHMINARAYANAN P R. Optimization of Process Parameters for in Situ Casting of Al/TiB2 Composites through Response Surface Methodology[J]. Transactions of Nonferrous Metals Society of China, 2013, 23(5): 1269-1274.
[14]刘永,李淑娟,李言,等.基于中心复合设计试验的SiC单晶片超声振动加工工艺参数优化[J].机械工程学报,2013,49(7):193-198.
LIU Yong, LI Shujuan, LI Yan, et al. Central Composite Design Test Based Process Parameters Optimizing for Compound Machining with Ultrasonic Vibration on SiC Wafer[J]. Journal of Mechanical Engineering, 2013,49(7):193-198.
[15]石文天, 王西彬, 刘玉德,等. 基于响应曲面法的微细铣削表面粗糙度预报模型与试验研究[J]. 中国机械工程, 2009, 20(20):2399-2402.
SHI Wentian, WANG Xibin, LIU Yude, et al. A Prediction Model and Experimental Study of Surface Roughness in Micro-milling Based on P6[J]. China Mechanical Engineering, 2009, 20(20):2399-2402.
[16]BUFFA G,DONATI L,FRATINI L, et al. Solid State Bonding Mechanics in Extrusion and FSW: Experimental Tests and Numerical Analyses[J]. AIP Conference Proceedings,2007, 907(1) : 590-595.
[17]雷红, 雒建斌, 张朝辉. 化学机械抛光技术的研究进展[J].上海大学学报(自然科学版),2003, 9(6):494-502.
LEI Hong, LUO Jianbin, ZHNAG Caohui. Advances in Chemical Mechanical Polishing[J]. Journal of Shanghai University(Natural Science Edition), 2003, 9(6): 494-502.
[18]刘东雷, 申长雨, 刘春太, 等. 基于响应曲面法与改进遗传算法的RHCM成型工艺优化[J].机械工程学报,2011,47(14):54-61.
LIU Donglei, SHEN Changyu, LIU Chuntai, et al. Efficient Process Parameters Optimization of Rapid Heat Cycling Molding Technology Based on Response Surface Methodology and Improved Genetic Algorithm[J]. Journal of Mechanical Engineering, 2011, 47(14): 54-61.
[19]张伟, 毛建国, 魏特特, 等. 基于响应曲面法的煤油发动机气门正时优化[J]. 中国机械工程, 2016, 27(7):933-938.
ZHANG Wei, MAO Jianguo, WEI Tete, et al. Optimization of Valve Timing of a Kerosene Engine Based on RSM[J]. China Mechanical Engineering, 2016, 27(7):933-938.