Key Assembly Quality Control Point Judgment Method in Motion Mechanisms Based on PLSR

Abstract

Abstract: To enhance the assembly quality of complex motion mechanisms, a key assembly quality control point judgment method in motion mechanisms was proposed based on PLSR. Firstly, the definitions of meta-action and meta-action chain were introduced based on “function—motion— action” functional structural decomposition. Secondly, the kinematics parameters of the terminal meta-action in meta-action chain were taken as the assembly quality analysis object，the power-transmitting model for meta-action chain was developed based on the state space model and the hierarchical iteration method, which reflected the relationship between the assembly quality analysis object and the influential factors in meta-action. Thirdly, the PLSR was used to solve the multicollinearity problems and few sample data problems of the influential factors, and the variable importance projection index was utilized to measure the importance degree of each influencial factor. Finally, the meta-action chain under the X-axis feed motion of grinder carriage was taken as an example, the results prove that the method may effectively figure out the most influential factors related to assembly quality.

Key words: assembly, quality control point； partial least squares regression(PLSR)； functional structural decomposition； meta-action chain

摘要： 为提高复杂运动机构装配质量，提出了一种基于偏最小二乘回归（PLSR）的运动机构装配质量关键控制点判定方法。基于“功能—运动—动作”的结构化分解方法，定义了元动作和元动作链的概念;将元动作链中最后一个元动作输出运动参数作为装配质量的分析对象，以状态空间模型和分层迭代法为工具构建元动作链动力传递模型，建立装配质量分析对象与各级元动作内部影响因素之间的联系;利用PLSR解决各级元动作内部影响因素之间的多重共线性和样本数据过少的问题，并且以变量投影重要性指标衡量影响因素重要程度。最后，以砂轮架X轴进给运动下的元动作链为例，证明了该方法能有效地提取出与装配质量最密切的影响因素。

关键词: 装配, 质量控制点；偏最小二乘回归；功能结构化分解；元动作链

CLC Number:

TG95

JU Pinghua, CHEN Zi, RAN Yan, XIAO Bing. Key Assembly Quality Control Point Judgment Method in Motion Mechanisms Based on PLSR[J]. China Mechanical Engineering.

鞠萍华, 陈资, 冉琰, 肖兵. [装配技术]基于偏最小二乘回归的运动机构装配质量关键控制点判定方法[J]. 中国机械工程.

References

[1]王慧,喻天翔,雷鸣敏,等.运动机构可靠性仿真试验系统体系结构研究[J].机械工程学报,2011,47(22):191-198.
WANG Hui, YU Tianxiang, LEI Mingmin, et al. Research on the Architecture of Simulative Experiment System for Mechanism Motion Reliability Analysis[J]. Journal of Mechanical Engineering, 2011,47(22):191-198.
[2]王波,唐晓青. 机械产品装配过程质量控制决策研究[J]. 中国机械工程,2010,21(2):164-168.
WANG Bo, TANG Xiaoqing. Decision-making of Quality Control for Mechanical Assembly Activities[J]. China Mechanical Engineering,2010,21(2):164-168.
[3]RAN Yan，ZHANG Genbao, ZHANG Lian. Quality Characteristic Association Analysis of Computer Numerical Control Machine Tool Based on Meta-Action Assembly Unit[J]. Advances in Mechanical Engineering, 2016,8(1)：1-10.
[4]SUZUKI T, OHASHI T, ASANO M, et al. AREM Shop Evaluation Method[J]. CIRP Annals Manufacturing Technology, 2004, 53(1):43-46.
[5]李国发,董精华,许彬彬,等.基于贝叶斯群判断理论的数控机床装配可靠性保障方法研究[J].组合机床与自动化加工技术,2016 (12):152-156.
LI Guofa, DONG Jinghua, XU Binbin,et al. Research of Assembly Reliability Assurance Method of CNC Machine Tools Based on Bayesian Group Decision Theory[J]. Modular Machine Tool & Automatic Manufacturing Technique,2016(12):152-156.
[6]张根保,葛红玉,王国强,等.可靠性驱动装配过程建模方法[J].农业机械学报,2011,42(10):192-196.
ZHANG Genbao, GE Hongyu, WANG Guoqiang. et al. Reliability-driven Modeling Approach of Assembly Process[J].Transactions of the Chinese Society of Agricultural Machinery,2011,42 (10):192-196.
[7]宋婷婷,赵子任,杜世昌,等.基于马尔可夫模型的关联多工序装配系统装配质量分析[J].上海交通大学学报,2018,52(3):324-331.
SONG Tingting, ZHAO Ziren, DU Shichang, et al. Quality Analysis of Multi-stage Assembly Systems Based on Markov Model[J]. Journal of Shanghai Jiao Tong University,2018,52(3):324-331.
[8]唐任仲,王国栋,唐文东,等.面向车间质量管理的关键工序识别方法[J].浙江大学学报（工学版）,2012,46(11):1937-1942.
TANG Renzhong, WANG Guodong, TANG Wendong, et al. Key Process Identification Method for Workshop Quality Management[J]. Journal of Zhejiang University(Engineering Science), 2012,46(11):1937-1942.
[9]RAN Yan, ZHANG Genbao, PANG Jihong. Research on Assembly Reliability Control Technology for Computer Numerical Control Machine Tools[J].Advances in Mechanical Engineering, 2017,9(1):1-12.
[10]WANG X, LIU M, GE M, et al. Research on Assembly Quality Adaptive Control System for Complex Mechanical Products Assembly Process under Uncertainty[J]. Computers in Industry, 2015, 74(S): 43-57.
[11]ZHANG Xiaogang, ZHANG Genbao, LI Yulong,et al. A Novel Fault Diagnosis Approach of a Mechanical System Based on Meta-action Unit[J].Advances in Mechanical Engineering, 2019,11(2):1-12.
[12]ZHANG Wei, ZHANG Genbao, RAN Yan, et al. The Full-state Reliability Model and Evaluation Technology of Mechatronic Product Based on Meta-action Unit[J]. Advances in Mechanical Engineering, 2018,10(5):1-11.
[13]李冬英. 数控机床装配质量建模与诊断技术研究[D].重庆:重庆大学,2014.
LI Dongying. Research on Quality Modeling and Diagnosis Technology for the Assembly Process of CNC Machine Tool[D]. Chongqing: Chongqing University, 2014.
[14]张根保, 葛红玉, 刘佳, 等. 可靠性驱动的装配过程建模及预测方法[J]. 计算机集成制造系统, 2012, 18(2):249-355.
ZHANG Genbao, GE Hongyu, LIU Jia, et al. Assembly Process Modeling and Prediction of Reliability-driven[J]. Computer Integrated Manufacturing Systems, 2012, 18(2): 249-355.
[15]刘银华,孙芮,吴欢. 基于车身尺寸数据流潜结构建模的装配质量预测控制[J]. 中国机械工程, 2019,30(2):237-243.
LIU Yinhua, SUN Rui, WU Huan. Latent Structure Modeling and Predictive Quality Control Based on Multi-source Data Streams in the Auto Body Assembly Processes[J]. China Mechanical Engineering, 2019, 30(2):237-243.
[16]王宁,徐济超,杨剑锋.多级制造过程关键质量特性识别方法[J].计算机集成制造系统，2013，19(4): 888-895.
WANG Ning, XU Jichao, YANG Jianfeng. IdentifyingMethod of Key Quality Characteristics in Multistage Manufacturing Process[J]. Computer Integrated Manufacturing Systems，2013，19(4):888-895.
[17]FRANCISCO F L, SAVIANO A M, DE S B T, et al. Kinetic Microplate Bioassays for Relative Potency of Antibiotics Improved by Partial Least Square (PLS) Regression[J]. Journal of Microbiological Methods, 2016, 124:28-34.